Sony NW-S603 / NW-S605 / NW-S703F / NW-S705F / NW-S706F Service Manual ▷ View online
NW-S603/S605/S703F/S705F/S706F
9
3-6. MAIN BOARD SECTION
3-7. LITHIUM ION BATTERY, MAIN BOARD
2
sheet (wire)
1
Set the knob (JOG) to the position of FOLDER.
knob (JOG)
knob (JOG)
4
connector
(CN108)
(CN108)
9
connector
(CN801)
(CN801)
q;
MAIN board section
3
connector (CN601)
6
two screws
(B1.4)
(B1.4)
5
SUB board
7
OLED sub assy flexible board
(CN401)
(CN401)
8
Peel copper leaf (tuner)
from the MAIN board.
from the MAIN board.
Note: Because adhesive sheet (SUB PWB)
is attached, remove the SUB board,
not giving an excessive force.
not giving an excessive force.
Note: Be sure to remove the connector of a battery
before removing the flexible board of OLED
sub assy. OLED sub assy may be damaged
if the flexible board of OLED sub assy is
removed with the connector of a battery not
removed.
sub assy. OLED sub assy may be damaged
if the flexible board of OLED sub assy is
removed with the connector of a battery not
removed.
adhesive sheet
(SUB PWB)
(SUB PWB)
Note: Adhesive sheet (battery) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (battery) is removed.
adhesive sheet (battery) is removed.
Note: Adhesive sheet (connector) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (connector) is removed.
adhesive sheet (connector) is removed.
2
adhesive sheet (battery)
6
holder (connector)
7
adhesive sheet (connector)
0
MAIN board
8
main PWB sheet
9
holder rear sheet (A)
1
3
spacer (line in)
4
lithium ion battery
5
two claws
Ver. 1.1
NW-S603/S605/S703F/S705F/S706F
10
3-8. OLED SUB ASSY
3-9. SWITCH BOARD
1
film sheet (OEL)
6
OLED sub assy
4
two screws
(B1.4)
(B1.4)
5
3
adhesive sheet (SW PWB)
2
Peel OLED sub assy flexible board
from the adhesive sheet (SW PWB).
from the adhesive sheet (SW PWB).
Note: Please work noting that the
OLED sub assy flexible board
is damaged.
is damaged.
Note: Adhesive Sheet (SW PWB) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (SW PWB) is removed.
adhesive sheet (SW PWB) is removed.
1
two screws
(B1.4)
(B1.4)
2
7
two screws
(B1.4)
(B1.4)
9
SWITCH board
3
sheet
(battery holder)
(battery holder)
6
sheet (PWB rib)
8
headphone assy flexible board
(CN852)
(CN852)
4
holder
(battery)
(battery)
5
copper leaf (tuner)
(NW-S703F/S705F/S706F only)
(NW-S703F/S705F/S706F only)
Ver. 1.1
NW-S603/S605/S703F/S705F/S706F
11
3-10. KNOB (JOG)
1
Push the knob (JOG)
in the derection of the arrow.
in the derection of the arrow.
knob (JOG)
3
JOG block
4
knob (JOG)
2
two claws
NW-S603/S605/S703F/S705F/S706F
12
3-11. HEADPHONE ASSY
2
cover (JOG)
3
holder (JOG)
spring (JOG)
concave portion
4
click plate (JOG)
7
headphone assy
9
arm (JOG)
8
spring (JOG)
5
holder (JOG)
Assemble the holder (JOG), meeting its concave portion
with the spring (JOG) as shown in the figure.
with the spring (JOG) as shown in the figure.
NOTE WHEN ASSEMBLING THE HOLDER (JOG)
arm (JOG)
6
Disengage the edge of the spring (JOG) from the arm (JOG).
1
two claws
Click on the first or last page to see other NW-S603 / NW-S605 / NW-S703F / NW-S705F / NW-S706F service manuals if exist.