Sony NW-A805 / NW-A806 / NW-A808 / NWZ-A815 / NWZ-A816 / NWZ-A818 Service Manual ▷ View online
13
NW-A805/A806/A808/NWZ-A815/A816/A818
4-1-3. Standby current check
This mode is used in case standby current is checked.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “POWER”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “DSVCHK”.
4. Press the
u
key, enter the state of the deep sleep.
5. Press the [BACK]
key, release the state of the deep sleep.
liquid crystal display
POWER DSVCHK
OK
6. Press the [BACK]
key, return to minor item selection screen.
4-1-4. Charge current check
This mode is used in case charge current is checked.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “POWER”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “CHGCHK”.
4. Press the
u
key, the charge setting is displayed.
liquid crystal display
POWER CHGCHK
AC
AC
5. In this state, each time the [OPTION]
key is pressed, the port
setting for the charge is changed as shown in the table below.
Port control
Display CHG_XCHGEN CHG_PEN
CHG_PEN2
AC
L
H
H
USB500
L
H
H
USB100
L
H
L
6. Press the [BACK]
key, return to minor item selection screen.
4-1-5. Battery voltage check
This mode is used in case battery voltage is checked.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “POWER”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “BATTCHK”.
4. Press the
u
key, the battery voltage is displayed.
When the battery voltage cannot be confirmed, “ERROR” is
displayed.
liquid crystal display
POWER BATTCHK
X.XXXV
X.XXXV: Battery voltage
6. Press the [BACK]
key, return to minor item selection screen.
4-2. Audio
While playing the audio track, it's in a repeat state. If [BACK]
key is
pressed, it’s stopped.
Press the
Press the
[VOL +]
key to switch the HP/LINE.
liquid crystal display
MPTAPP MENU
POWER
AUDIO
OUTPUT
VIDEO
SN
OTHER
F1
SHUTDOWN
F2
EXITTEST
SEPLR
SEPRL
MAXOUT
NMLZR
SPCHK
SEPRL
MAXOUT
NMLZR
SPCHK
14
NW-A805/A806/A808/NWZ-A815/A816/A818
4-2-1. Output check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “OUTPUT”.
4. Press the
u
key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 25”
audio signal is outputted.
liquid crystal display
AUDIO OUTPUT
1kHz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
4-2-2. S/N check
“Infinity Zero VOLUME: 30” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “SN”.
4. Press the
u
key, “Infinity Zero VOLUME: 30” audio signal
is outputted.
liquid crystal display
AUDIO SN
Infinity Zero
HPOUT [ VOL: 30 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
4-2-3. Frequency characteristic 1 check
“20 Hz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “F1”.
4. Press the
u
key, “20 Hz 0 dBs L-ch/R-ch VOLUME: 25”
audio signal is outputted.
liquid crystal display
AUDIO F1
20Hz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
4-2-4. Frequency characteristic 2 check
“20 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “F2”.
4. Press the
u
key, “20 kHz 0 dBs L-ch/R-ch VOLUME: 25”
audio signal is outputted.
liquid crystal display
AUDIO F2
20kHz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
15
NW-A805/A806/A808/NWZ-A815/A816/A818
4-2-5. CH separation (L-ch) check
“1 kHz 0 dBs L-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “SEPLR”.
4. Press the
u
key, “1 kHz 0 dBs L-ch VOLUME: 25” audio
signal is outputted.
liquid crystal display
AUDIO SEPLR
1kHz 0dBs Lch
1kHz 0dBs Lch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
4-2-6. CH separation (R-ch) check
“1 kHz 0 dBs R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “SEPRL”.
4. Press the
u
key, “1 kHz 0 dBs R-ch VOLUME: 25” audio
signal is outputted.
liquid crystal display
AUDIO SEPRL
1kHz 0dBs Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
4-2-7. Maximum output check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” (Headphone output when
AVLS operates: “1 kHz 0 dBs L-ch/R-ch VOLUME: 13”) audio sig-
nal is outputted.
AVLS operates: “1 kHz 0 dBs L-ch/R-ch VOLUME: 13”) audio sig-
nal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “MAXOUT”.
4. Press the
u
key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”
(Headphone output when AVLS operates: “1 kHz 0 dBs L-ch/
R-ch VOLUME: 13”) audio signal is outputted.
R-ch VOLUME: 13”) audio signal is outputted.
liquid crystal display
AUDIO MAXOUT
1kHz 0dBs L/Rch
1kHz 0dBs L/Rch
HPOUT [ VOL: 30 ]
AVLS OFF
START
5. In this state, each time the [OPTION]
key is pressed, AVLS on/
off switch is performed.
6. Press the [BACK]
key, return to minor item selection screen.
4-2-8. Normalizer check
“1 kHz –24 dBs L-ch/R-ch VOLUME: 30” audio signal is output-
ted.
ted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “NMLZR”.
4. Press the
u
key, “1 kHz –24 dBs L-ch/R-ch VOLUME: 30”
audio signal is outputted.
liquid crystal display
AUDIO NMLZR
1kHz –24dBs L/Rch
HPOUT [ VOL: 30 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
16
NW-A805/A806/A808/NWZ-A815/A816/A818
4-2-9. Sound pressure regulation level check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “AUDIO”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “SPCHK”.
4. Press the
u
key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”
audio signal is outputted.
liquid crystal display
AUDIO SPCHK
1kHz 0dBs L/Rch
HPOUT [ VOL: 30 ]
START
5. Press the [BACK]
key, return to minor item selection screen.
4-3. Video
liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO
VIDEO
LCD
OTHER
SHUTDOWN
EXITTEST
4-3-1. LCD display check
Liquid crystal display is checked.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “VIDEO”, and press the
B
key to select the “LCD”.
3. Press the u key, all black is displayed on the liquid crystal
display.
4. In this state, each time the [OPTION]
key is pressed, the screen
display changes in the following order.
All black (default)
→ All red → All green → All blue → All
white
→ Color bar → Maximum drawing size confirmation
Maximum drawing size confirmation:
All blue (All sides are red) is displayed. Whether red in all
All blue (All sides are red) is displayed. Whether red in all
sides is seen is confirmed.
4. In this state, each time the [VOL ---]
key is pressed, LCD back
light brightness min/max/middle switch is performed.
5. Press the [BACK]
key, return to minor item selection screen.
4-4. Other
liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO
VIDEO
OTHER
CLOCK
SHUTDOWN
KEY
EXITTEST
FORMAT
DEST
SPSET
FWVER
NCAPCHK
DEST
SPSET
FWVER
NCAPCHK
4-4-1. Clock check
The movement of an internal clock is confirmed.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
v
/
V
key to select the “OTHER”, and press the
B
key to enter the minor item.
3. Press the
v
/
V
key to select the “CLOCK”.
4. Press the
u
key, date and time are displayed.
liquid crystal display
OTHER CLOCK
XX, XX XX XXXX
##:##:##.######
START
XX, XX XX XXXX
: Date
##:##:##.######
: Time
“START” changes into “OK” if the movement of an internal
clock is confirmed.
5. Press the [BACK]
key, return to minor item selection screen.
Click on the first or last page to see other NW-A805 / NW-A806 / NW-A808 / NWZ-A815 / NWZ-A816 / NWZ-A818 service manuals if exist.