Sony MDS-DRE1 Service Manual ▷ View online
– 9 –
UPPER CABINET SECTION
MD ASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
SECTION 3
DISASSEMBLY
4
two connectors
(CN801, 802)
(CN801, 802)
3
Open the upper cabinet
section in arrow direction.
section in arrow direction.
1
five screws
(BV3
(BV3
×
10)
1
three screws
(BV3
(BV3
×
10)
2
two screws
(BV3
(BV3
×
8)
6
upper cabinet section
4
two connectors
(CN701, 751)
(CN701, 751)
5
flat wire
(CN902)
(CN902)
3
two screws
(BVTP3
(BVTP3
×
8)
2
two flat wires
(CN4, 5)
(CN4, 5)
3
two screws
(BVTP3
(BVTP3
×
8)
1
connector
(CN3)
(CN3)
4
MD assembly
– 10 –
BRACKET (MD)
SLIDER (M) ASSEMBLY
2
two screws
(B2.6
(B2.6
×
18)
1
Rotate the pully (BD) in arrow
direction
direction
A
and move the slider
assembly in arrow direction
B
.
2
two screws
(B2.6
(B2.6
×
18)
3
two collars
4
insulator (MD)
4
two insulators (MD)
5
compression spring
6
bracket (MD)
5
compression spring
4
insulator (MD)
3
two collars
5
two compression
springs
springs
A
B
slider
assembly
assembly
claw
B
C
A
B
4
Move the claw
C
on the slider
up to the base groove in arrow
direction
direction
A
, and raise it in arrow
direction
B
to remove.
claw
A
claw
C
1
Disengage a coil spring
from the claw
from the claw
A
.
2
Disengaging the claw
B
,
raise the lever (SLM)
upwards to remove.
upwards to remove.
3
Rotate the pully (BD) in arrow direction
C
.
Base groove
– 11 –
BASE UNIT AND LOADING MOTOR ASSEMBLY
SLIDER ASSEMBLY MOUNTING
4
two screws
(B2.6
(B2.6
×
5)
1
screw
(BV3
(BV3
×
6)
1
two screws
(BV3
(BV3
×
6)
5
connector
(CN192)
(CN192)
6
loading motor
assembly
assembly
2
base unit
3
belt
B
A
C
3
Move the slider assembly in
arrow direction
arrow direction
B
, and lock it
to the lever (SLM).
1
Rotate fully the lever (SLM)
in arrow direction
in arrow direction
A
.
2
Rotate the pully (BD)
in arrow
in arrow
C
direction.
– 12 –
SECTION 4
TEST MODE
4-4. Selecting the Test Mode
Eight test modes are selected by turning the
[AMS]
knob.
Function
[AMS]
knob
[ENTER/YES]
button
[EDIT/NO]
button
4-1. Setting the Test Mode
Press
[ ]
(POWER) switch while pressing the
[AMS]
knob to turn POWER ON.
4-2. Exiting the Test Mode
Press the
[REPEAT]
button. Unplug the power plug from an outlet.
4-3. Basic Operations of the Test Mode
All operations are performed using the
[AMS]
knob,
[ENTER/YES]
button, and
[EDIT/NO]
button.
The functions of these buttons are as follows.
Contents
Changes parameters and modes
Proceeds onto the next step. Finalizes input.
Returns to previous step. Stops operations.
Contents
Temperature compensation offset adjustment
Laser power adjustment
Traverse adjustment
Focus bias adjustment
Focus bias check
Continuous playback mode
Continuous recording mode
Non-volatile memory mode *
Display
TEMP ADJUS
LDPWR ADJUS
EFBAL ADJUS
FBIAS ADJUS
FBIAS CHECK
CPLAY MODE
CREC MODE
EEP MODE
For detailed description of each adjustment mode, refer to 5. Electrical Adjustments.
If a different adjustment mode has been selected by mistake, press the
If a different adjustment mode has been selected by mistake, press the
[EDIT/NO]
button to exit from it.
* The EEP MODE is not used in servicing. If set accidentally, press the
[EDIT/NO]
button immediately to exit it.
4-4-1. Operating the Continuous Playback Mode
1. Entering the continuous playback mode
1 Set the disc in the unit (either MO or CD).(MO: Recordable disc, CD: Disc for playback only)
2 Rotate the
2 Rotate the
[AMS]
knob and display “CPLAY MODE”.
3 Press the
[ENTER/YES]
button to change the display to “CPLAY IN”.
4 When access completes, the display changes to “C1 =
AD =
”.
Note:
The “ ” displayed are arbitrary numbers.
2. Changing the parts to be played back
1 Press the
[ENTER/YES]
button during continuous playback to change the display to “CPLAY MID”, “CPLAY OUT”.
When pressed another time, the parts to be played back can be changed.
2 When access completes, the display changes to “C1 =
AD =
”.
Note:
The “ ” displayed are arbitrary numbers.
3. Ending the continuous playback mode
1 Press the
[EDIT/NO]
button. The display will change to “CPLAY MODE”.
2 Press the
[ EJECT]
button and remove the disc.
Note 1:
The playback start addresses for IN, MID, and OUT are as follows.
IN
40h cluster
MID
300h cluster
OUT
700h cluster
§
U
Click on the first or last page to see other MDS-DRE1 service manuals if exist.