Sony ICD-U50 / ICD-U60 / ICD-U70 Service Manual ▷ View online
9
ICD-U50/U60/U70
1
button (RS)
2
knob (hold)
4
two sheets
(hold)
5
two sheets
(DPC)
6
guard
3
knob (DPC)
2-7. BUTTON (RS), KNOB (HOLD), KNOB (DPC)
10
ICD-U50/U60/U70
[How to enter the test mode]
To enter the test mode, turn ON the
> HOLD switch and while
pressing the STOP key and the VOL– key at the same time, power
on (set a dry battery).
on (set a dry battery).
[How to exit the test mode]
Remove the battery to exit the test mode.
[Initial state of the test mode]
When the unit enters the test mode, the [Model and version number]
screen is displayed on LCD.
screen is displayed on LCD.
[Test mode flow chart]
U70 VER.1.60
System controller version (example of version 1.60)
Model information (example for ICD-U70)
1SHUF
LSP HQ
V O R H L
U70 VER.1.60
LCD
BATTERY
MEMORY INIT
INITIALIZE
INIT OK
INIT NG
BATTERY 1.500V
LCD ALL
LCD OFF
1. [Model and version number] screen (when entering the test mode)
2. [LCD] display screen
Function select screen
Function select screen
.
>
.
>
.
>
STOP
u
All elements of LCD are turned ON.
All elements of LCD are turned OFF.
Screen display during operation
Screen display during operation
3. [BATTERY] (Battery voltage check) screen
STOP
u
STOP
u
STOP
u
Resultant screen
Battery voltage
.
>
4. [MEMORY INIT] (Flash memory initialize) screen
u
Screen display during operation
Resultant screen
Resultant screen
Formatting and initialization have ended
with success.
with success.
Formatting and initialization have ended
with failure.
with failure.
STOP
STOP
.
>
SECTION 3
TEST MODE
11
ICD-U50/U60/U70
[How to operate the test mode]
1. [Model and version number] screen
1. This screen appears when the unit enters the test mode. This
screen shows the model name and the system controller version
number.
number.
2. Press the > key to move to the next item (LCD display
check).
2. [LCD] display screen
1. Press the NX , STOP , . , > key to turn ON or
OFF of all elements of the LCD.
2. Press the > key to move to the next item (Battery voltage
check) from the [LCD] display screen, or press the . key
to return to the previous item [Model and version number]
screen.
to return to the previous item [Model and version number]
screen.
3. [BATTERY] (Battery voltage check) screen
1. Press the NX key on the [BATTERY] screen to check the
battery output voltage to the system controller, and the resultant
voltage is displayed. Press the STOP key to return to the
[BATTERY] screen.
voltage is displayed. Press the STOP key to return to the
[BATTERY] screen.
2. Press the > key on the [BATTERY] screen to move to the
next item [MEMORY INIT] or press the . key to return
to the previous item [LCD] display screen.
to the previous item [LCD] display screen.
4. [MEMORY INIT] (Flash memory initialize) screen
1. Press the NX key on the [MEMORY INIT] screen to start
formatting and initialization of the NAND flash memory. When
formatting and initialization of the NAND flash memory are
started, all menu items (including watch setting) of the MENU
information are initialized, and ALL ERASE of all folders are
executed.
When formatting and initialization have ended with success,
[INT OK] is displayed. When formatting and initialization have
ended with failure, [INT NG] is displayed.
Press the STOP key to return to the [MEMORY INIT] screen.
formatting and initialization of the NAND flash memory are
started, all menu items (including watch setting) of the MENU
information are initialized, and ALL ERASE of all folders are
executed.
When formatting and initialization have ended with success,
[INT OK] is displayed. When formatting and initialization have
ended with failure, [INT NG] is displayed.
Press the STOP key to return to the [MEMORY INIT] screen.
2. Press the > key on the [MEMORY INIT] screen to return
to the initial screen of [Model and version number]. Press the
> key to return to the previous item [BATTERY] display
screen.
> key to return to the previous item [BATTERY] display
screen.
12
ICD-U50/U60/U70
SECTION 4
DIAGRAMS
•
Waveform
Note on Schematic Diagrams:
• All capacitors are in
• All capacitors are in
µ
F unless otherwise noted. (p: pF) 50 WV or
less are not indicated except for electrolytics and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise specified.
•
f
: internal tolerance.
•
C
: panel designation.
•
A
: B+ Line.
• Power voltage is dc 1.5V and fed with regulated dc power supply
from battery terminal.
• Voltages and waveforms are dc with respect to ground under no-
signal (detuned) conditions.
no mark : PLAY
[ ]
no mark : PLAY
[ ]
: REC
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production toler-
ances.
ances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production toler-
ances.
ances.
• Circled numbers refer to waveforms.
• Signal path.
F
: PB
L
: REC
Note on Printed Wiring Boards:
•
•
Y
: parts extracted from the conductor side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Side B)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Side A)
the parts face are indicated.
1
IC701
5
(XIN)
244 ns
2 Vp-p
1 V/DIV, 100 ns/DIV
Click on the first or last page to see other ICD-U50 / ICD-U60 / ICD-U70 service manuals if exist.