Sony HT-XT3 Service Manual ▷ View online
HT-XT3
9
SECTION 2
DISASSEMBLY
•
This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
• JIG
When disassembling the unit, use the following jig (for top glass
When disassembling the unit, use the following jig (for top glass
removal).
Part
No.
Description
J-2501-238-A
JIG FOR SPEAKER REMOVAL
SET
2-11. LOUDSPEAKER (11CM) (SUBWOOFER) (SP1, SP2)
(Page
(Page
18)
2-2. FRONT GRILL SECTION, TOP GLASS
(Page
(Page
10)
2-3. TOUCH
BOARD
(Page
11)
2-9. PANEL (L, R)
(Page
(Page
16)
2-10. FRONT SPK CABINET SECTION
(Page
(Page
17)
2-7. MB-1408
BOARD
(Page
15)
2-8. AMP
BOARD,
SWITCHING REGULATOR (3L405W)
(Page
15)
2-6. POWER
CORD
(Page
14)
2-4. AMP
SECTION
(Page
12)
2-5. HOW TO INSTALL AMP SECTION
(Page
(Page
13)
HT-XT3
10
2-2. FRONT GRILL SECTION, TOP GLASS
Note: As the part is made of glass, exercise extreme caution when handling it.
5
glass, top
4
3
Insert the jig into the space and slowly remove
the top glass.
Note
: When using a jig, please work so as not to
injure top glass and cabinet section.
3
Insert the jig into the space and slowly remove
the top glass.
Note
: When using a jig, please work so as not to
injure top glass and cabinet section.
3
Insert the jig into the space and slowly remove
the top glass.
Note
: When using a jig, please work so as not to
injure top glass and cabinet section.
2
front grill section
1
HT-XT3
11
2-3. TOUCH BOARD
colored line
colored line
Insert is straight to the interior.
Insert is incline
wire (flat type)
connector
connector
wire (flat type)
Note: When installing the wire (flat type), ensure that the
colored line is not slanted after insertion.
5
Peel off the
TOUCH
board
section.
2
wire (flat type) (10 core)
(CN1601)
4
wire (flat type) (6 core)
(CN1602)
6
cushion, touch
7
TOUCH board
1
filament tape
OK
NG
3
filament tape
6
cushion, touch
3DVWLQJSRVLWLRQRI728&+ERDUG
filament
tape
tape
filament
tape
tape
acoustic tape
TOUCH board
guide line
HT-XT3
12
2-4. AMP SECTION
4
three screws
(+BVTP 3
u 8)
qd
one screw (+BVTP 3
u 8)
6
Remove the AMP section in
the direction of the arrow.
7
CN6002 (4P)
8
CN6001 (4P)
9
CN6003 (5P)
qa
CN502 (5P)
qs
CN501 (5P)
0
Remove the wire
from the clamp.
clamp
MB-1408
board
board
qf
AMP section
Note
1:
When installing the AMP section, refer to
“2-5. HOW TO INSTALL AMP SECTION”
on page 13.
2
wire (flat type)
(20 core) (CN3004)
3
wire (flat type)
(10 core) (CN3005)
5
four screws
((3.5
u 14), tapping)
5
nine screws
((3.5
u 14), tapping)
5
two screws
((3.5
u 14), tapping)
– Rear bottom view –
:LUHVHWWLQJ
Note 2: When installing the wire (flat type),
ensure that the colored line is not
slanted after insertion.
colored line
Insert is incline
wire (flat type)
connector
colored line
Insert is straight to the interior.
wire (flat type)
connector
OK
NG
1
filament
tape
Click on the first or last page to see other HT-XT3 service manuals if exist.