DOWNLOAD Sony HT-RT5 Service Manual ↓ Size: 9.96 MB | Pages: 64 in PDF or view online for FREE

4.  In the state of step 3, press the [INPUT] button on the remote 

commander and “K 0” is displayed on the fl uorescent indicator 
tube.

 

Each time a button on the unit is pressed, “K 0” value increas-
es. However, once a button is pressed, it is no longer taken into 
account.

 

When pressing the all buttons, “OK” and “K 5” are alternately 
displayed on the fl uorescent indicator tube.

5. Press 

the 

[

2

 –] button on the remote commander and return to 

the state of step 3.

6.  In the state of step 3, press the [

2

 +] button on the remote 

commander and “MZ_A” (model name) is displayed on the 
fl uorescent indicator tube. (“A” will display differs depending 
on the destination)

(Displayed characters in the above fi gure are example)

 

Each time the [

2

 +] button on the remote commander is 

pressed, the display changes from destination → system ver-
sion → IFCon audio coeffi cient version → BD coeffi cient ver-
sion  → SPC version in this order, and returns to the model 
name display.

 

(Displayed characters/values in the above fi gure are example)

US and Canadian models (UC2)

NA

AEP model (CEL)

CE2

UK model (CEK)

CEK

African model (Except for 
Kenyan, Tanzania, Nigerian) (E3)

E3

Saudi Arabia, UAE, Kuwait, Iraqi, 
Kenyan, Tanzanian and Nigerian 
models (EA3)

EA3-2

Singapore model (SP1)

SP

Latin American model (Except for 
Brazilian, Argentina) (LA9)

MX6

Argentina model (AR2)

LATIN

Australian model (AU1)

AU

Chinese model (CN4)

CN

Releasing method:
Press the [

@

/1

] button and return to the normal mode.

AMP  TEST
It can the AMP setting and measurement.

Procedure:
1.  Press the [

@

/1

] button to turn the power on.

2.  Press the buttons on the remote commander in the order of [

x

] 

→ [DISPLAY] → [

2

 –] → [

V].

3.  The message “MSURE” is displayed on the fl uorescent indica-

tor tube and enter the AMP setting and measurement mode.

4.  Each time the [DIMMER] button on the remote commander is 

pressed, the swap mode changes from FULL → THRU → F2S 
→ F2SB → F2CW in this order, and returns to the “FULL” 
setting.

FULL

The front L/R input is output to all speakers.

THRU

Each channel is directly output (through).

F2S

The front L/R input is output to surround L/R 
speakers.

F2SB

Not output to the speaker in this unit.

F2CW

The front R input is output to center/subwoofer 
speakers.

5. Each time the [

m

] button on the remote commander is 

pressed, attenuate on/off setting is changed.

6.  Each time the [

%

] button on the remote commander is pressed, 

volume setting is changed.

 

The setting “V.N” is normal volume mode.

 

The setting “V.MSM”, press the [VOLUME +]/[VOLUME –] 
buttons, the message is changed with “MIN” ↔ “VOL  1” ↔ 
“VOL 20” ↔ “MAX” on the fl uorescent indicator tube and 
volume setting is changed.

– Continued on next page –

7.  Each time the [CLEAR AUDIO+] button on the remote com-

mander is pressed, VACS on/off setting is changed.

8.  Each time the [VOICE] button on the remote commander is 

pressed, gain value increase. Each time the [NIGHT] button on 
the remote commander is pressed, gain value decrease.

 

(Gain value is +3.0 to –3.0)

(Displayed values in the above fi gure are example)

Releasing method:
There are following two releasing methods.
•  Press the [

@

/1

] button, the message “WAIT” → “RESET” is 

displayed on the fl uorescent indicator tube and then turn the 
power off.

• 

Unplug the AC cord.

WIRELESS  SOUND  COLD  RESET
It can initialize various backup information of Surround Speaker 
(SA-SLRT5/SRRT5) and Subwoofer (SA-WRT5).

Preparation:
Connect the Surround Speaker (SA-SLRT5/SRRT5), Subwoofer 
(SA-WRT5) and the Bar Speaker (SA-RT5) by wireless.

Note: Refer to “NOTES ON THE WIRELESS CONNECTION (LINK) 

AFTER  REPAIRS ARE COMPLETE”on page 7 for details of 
wireless connection.

Procedure:
1.  Press the [

@

/1

] button to turn the power on.

2.  Press the buttons on the remote commander in the order of [

x

] 

→ [DISPLAY] → [BACK] → [V].

3.  The on/standby indicator on the Surround Speaker (SA-

SLRT5/SRRT5) and Subwoofer (SA-WRT5) turns red and 
fl ashes, then turns on orange.

t 

t 

4.  Unplug the AC cord on the Surround Speaker (SA-SLRT5/

SRRT5) and Subwoofer (SA-WRT5) from an outlet and insert 
the AC cord again.

Note: The operation in this mode must use a TV monitor and supplied 

remote commander.

Setting method of the BD service mode:
1.  Connect this unit with TV monitor.
2.  Press the [

?/1

] button to turn the power on.

3.  Press button in order of the [

x

] → [DISPLAY] → [

X

] → [

V] 

on the remote commander.

 

(Make the interval when each button is pressed within one sec-
ond)

4.  Enter the BD service mode. The OSD menu on TV monitor 

can be operated by remote commander.

• Diag
 

Performs unit test of devices installed on the board.

• Log
 

Error log is displayed. Displayed contents can also be saved in 
an USB memory device.

• Factory 

Initialize

 

Not used for the servicing.

• Network
 

Not used for the servicing.

• Version 

Up

 

Not used for the servicing.

• System 

Information

 

Displays the system information of the unit.

 

Displays information such as the software version, drive infor-
mation, etc.

• EMC 

Test 

Mode

 

Not used for the servicing.

• Drive
 

Not used for the servicing.

• HDD 

mode

 

Not used in this unit.

• RF 

TEST 

MODE

 

Not used for the servicing.

Releasing method:
Turn the power off by pressing the [

@

/1

] button.

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode
[10] RF TEST MODE

Version Up

‡Not used for the servicing

System Information

‡Displays system information

Factory Initialize

‡Not used for the servicing

Log
Displays Error Log

Error Log

‡Displays error log

Diag

Network

‡Not used for the servicing

HDD log

Device Test

‡86%WHVW

Video Test

‡Not used for the servicing

Audio Test

‡Not used for the servicing

Audio Input Test

‡Not used for the servicing

Wireless LAN Test

‡Wireless LAN test

EMC Test Mode

‡Not used for the servicing

Drive

‡Not used for the servicing

HDD Mode

‡Not used in this unit

Start Update

‡Not used for the servicing

Start Initialize

‡Not used for the servicing

‡'LDJ7HVW

Transcoder Test

‡Not used in this unit

HDMI Input Test

‡Not used in this unit

%OXHWRRWK'HYLFH7HVW

‡%OXHWRRWKGHYLFHWHVW

Mic Test

‡Not used in this unit

‡Not used in this unit

RF TEST MODE

‡Not used for the servicing

3.  Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[

M

]/[

m

]  Moves the cursor

[ ] 

Moves to the screen of the item selected with the cursor

*  Cursor is not displayed when the menu is fi rst displayed.

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive

4.  Diag (Device Test)
This screen is used for test of each devices mounted on the board.

Screen 1: Selects the test category
Operation:
[

<

]/[

,

]  Selects the category

[

m

]/[ ] 

Moves to the selected category

[BACK] 

Returns to the service top menu

Screen 2: Device test
Selects the device to test after selecting “Device Test” in screen 1.
Operation:
[

<

]/[

,

]  Selects the device to test

[ ] 

Executes the test

[M] 

Returns to selection of test category

[BACK] 

Returns to selection of test category

•  List of test categories
Device Test
Video Test (Not used for the servicing)
Audio Test (Not used for the servicing)
Audio Input Test (Not used for the servicing)
Wireless LAN Test
Mic Test (Not used in this unit)
HDMI Input Test (Not used in this unit)
Transcoder Test (Not used in this unit)
Bluetooth Device Test

 Diag

 Diag

•  Device test  : List of devices
USB HOST 

: USB media check. Only one time.

D/A Converter  : Not used in this unit.
Ifcon 

: Not used in this unit.

MIC 

: Not used in this unit.

MFI 

: Not used in this unit.

IPC 

: Not used in this unit.

External HDMI : Not used in this unit.
Transcoder 

: Not used in this unit.

 Not used for the servicing.

 Not used for the servicing.