Sony HT-NT3 Service Manual ▷ View online
HT-NT3
21
WIRELESS SOUND COLD RESET
It can initialize various backup information of Subwoofer (SA-
WNT3).
It can initialize various backup information of Subwoofer (SA-
WNT3).
Preparation:
Connect the Bar Speaker (SA-NT3) and the Subwoofer (SA-
WNT3)
Connect the Bar Speaker (SA-NT3) and the Subwoofer (SA-
WNT3)
Procedure:
1. Press button in order of the [
1. Press button in order of the [
x
]
→ [DISPLAY] → [BACK] →
[
M
] on the remote commander.
2. The power indicator LED on the Subwoofer (SA-WNT3) turns
as below.
For secure link : orange (light up) -> red (fl ashing) ->
orange (light up)
For normal link : green (light up) -> red (fl ashing) ->
orange (light up)
Power indicator LED
3. Pull out the power cord on the Subwoofer (SA-WNT3) from
an outlet and insert the power cord again.
FACTORY INITIALIZE
Return all of the unit setting to their factory defaults.
Return all of the unit setting to their factory defaults.
Note 1: Disconnect the following connections when you use this mode.
• USB
Note 2: The operation in this mode must use a remote commander and TV
monitor.
Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Press the [HOME] button on the remote commander, and the
home menu is displayed.
3. Select
“Setup”
→ “Resetting”, and press the [ ] button on the
remote commander.
Resetting
Easy Network Settings
Easy Setup
Input Skip Setting
4. Select “Initialize Personal Information”, and press the [
]
button on the remote commander.
Initialize Personal Information
Delete personal data when disposing
Delete personal data when disposing
Reset to Factory Default Settings
5. Select “OK”, and press the [
] button on the remote com-
mander.
Initialize Personal Information
OK
Cancel
Deleting Personal Information.
Do you want to proceed?
If you destroy or transfer or resell this
unit, please delete all Personal Information
for security reasons.
Please take appropriate measures such as
logging out after using a network service.
Do you want to proceed?
If you destroy or transfer or resell this
unit, please delete all Personal Information
for security reasons.
Please take appropriate measures such as
logging out after using a network service.
6. The message “Close” appears, and press the [
] button on the
remote commander.
Initialize Personal Information
Close
Initialization complete.
HT-NT3
22
7. Select “Reset to Factory Default Settings”, and press the [
]
button on the remote commander.
Initialize Personal Information
Reset to Factory Default Settings
Restore each setting to the factory
default setting.
Restore each setting to the factory
default setting.
8. Select “All Settings”, and press the [
] button on the remote
commander.
Reset to Factory Default Settings
Audio Settings
Bluetooth Settings
System Settings
Input Skip Setting
Network Settings
All Settings
9. Select “Start”, and press the [
] button on the remote com-
mander.
All Settings
Restore all settings to the factory default
settings. The system will turn off after
reset.
settings. The system will turn off after
reset.
Start
Cancel
10. Initialization ends when the message “HELLO” on the fl uores-
cent indicator tube disappears.
SVC SERVICE MODE
Note: The operation in this mode must use a remote commander and TV
monitor.
Setting method of the SVC service mode:
1. Connect this unit with the TV monitor.
2. Press the [
1. Connect this unit with the TV monitor.
2. Press the [
?/1
] button on the main unit to turn the power on.
3. Press button in order of the [
x
]
→ [DISPLAY] → [
X
]
→ [
M
]
on the remote commander.
(Make the interval when each button is pressed within two sec-
onds).
onds).
4. The message “SVC” displayed on the fl uorescent indicator
tube. The OSD menu on TV monitor can be operated by the
remote commander.
remote commander.
1. Main
Functions
• Diag
Performs unit test of devices installed on the board.
• Log
Error log is displayed. Displayed contents can also be saved in
an USB memory device.
an USB memory device.
• Factory
Initialize
Restores the unit to its factory settings.
• Network
Not
Not
used.
• Version
Up
Not
used.
• System
Information
Displays the system information of the unit.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
• EMC
Test
Mode
Not
used.
• Drive
Not
Not
used.
• HDD
Mode
Not
used.
• RF
Test
Mode
Not
used.
HT-NT3
23
2. Menu
Tree
Version Up
Not used
Not used
System Information
Displays system information
Displays system information
Factory Initialize
Initialize default settinJ
Initialize default settinJ
LoJ
Displays Error LoJ
Displays Error LoJ
Error LoJ
Displays error loJ
DiaJ
Network
Not used
Not used
Device Test
US%D$&IFcon0I&0FII3&
E[ternal +D0ITranscoder test
US%D$&IFcon0I&0FII3&
E[ternal +D0ITranscoder test
Video Test
Not used
Not used
$udio Test
Not used
Not used
$udio Input Test
Not used
Not used
:ireless L$N Test
33 test only
33 test only
E0& Test 0ode
Not used
Not used
+DD 0ode
Not Used
Not Used
Drive
Not Used
Not Used
Start Initialize
Initialize default settinJ for tKe unit
DiaJ Test
0ic Test
Not used
Not used
+D0I Input Test
Not used
Not used
Transcorder Test
Not used
Not used
Service 0ode 0enu
[1] DiaJ
[] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] DiaJ
[] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
Service 0ode 0enu
[1] DiaJ
[] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] E0& Test 0ode
[8] Drive
[] +DD 0ode
[10] 5F Test 0ode
[1] DiaJ
[] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] E0& Test 0ode
[8] Drive
[] +DD 0ode
[10] 5F Test 0ode
5F Test 0ode
Not used
Not used
+DD LoJ
Not used
%luetootK Device Test
HT-NT3
24
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen
[2]
Moves to Log screen
[3]
Moves to Factory Initialize screen
[4]
Moves to Network screen
[5]
Moves to Version Up (USB version update) screen
(Not used)
(Not used)
[6]
Moves to System Information screen
[7]
Moves to EMC test mode screen (Not used)
[8]
Moves to Drive screen (Not used)
[9]
Moves to HDD mode screen (Not used)
[10]
Moves to RF Test Mode (Not used)
[
M
]/[
m
] Moves the cursor
[
]
Moves to the screen of the item selected with the cursor
* Cursor is not displayed when the menu is fi rst displayed.
* Service Mode Menu
[2] Log
[4] Network --> Not Support In This Model
[5] Version Up
[6] System InformaƟon
[7] EMC Test Mode
[8] Drive --> Not Support In This Model
[9] HDD mode
[10] RF Test Mode
[5] Version Up
[6] System InformaƟon
[7] EMC Test Mode
[8] Drive --> Not Support In This Model
[9] HDD mode
[10] RF Test Mode
HELP: [DOWN][ENT]
[3] Factory Initialize
[1] Diag
4. Diag (Device Test)
This screen is used to test devices mounted on the board.
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
]
Selects the device to test
[
]
Executes the test
[
M]
Returns to selection of test category
[RETURN] Returns to selection of test category
•
List of test categories
Device Test
Video Test (Not used)
Audio Test (Not used)
Audio Input Test (Not used)
Wireless LAN Test
Mic Test (Not used)
HDMI Input Test (Not used)
Transcorder Test (Not used)
Bluetooth Device Test
Video Test (Not used)
Audio Test (Not used)
Audio Input Test (Not used)
Wireless LAN Test
Mic Test (Not used)
HDMI Input Test (Not used)
Transcorder Test (Not used)
Bluetooth Device Test
Diag
Category:
Diag
Category: Device Test
Device:
Front USB Media check ... OK
Checking...
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
•
Device Test: List of devices
USB Host
: USB media check (front). Only one time.
5. Diag (Wireless LAN Test)
This screen performs wireless LAN/Miracast test.
This screen performs wireless LAN/Miracast test.
Screen 1: Selects Wireless LAN Test Category
Operation:
[
Operation:
[
<]/[,] Selects the category
[
m]/[ ]
Activate the selected category
[RETURN] Returns to service top menu
Screen 2: Selects Wireless LAN Test
Operation:
[1]
Operation:
[1]
Show Wireless LAN module Information (Not used)
[2]
Connect to Access Point (Not used)
[3]
Start display RSSI value (Not used)
[4]
Start Ping Test (Not used)
[5]
Write P2P Address to Registry
[6] P2P
Registry Check
[
M]/[m] Selects
Test
[
]
Activate and Start Test
[RETURN] Returns to test category selection
Screen 2: Store P2P device address to Registry
Display will show : P2P device address : “xx:xx:xx:xx:xx:xx”
•
Display will show : P2P device address : “xx:xx:xx:xx:xx:xx”
•
Viewing the Status display, if
Successful : “Write Successful!”
Fail: “Write Fail!”
Screen 3: P2P Registry Check
Show P2P device address “xx:xx:xx:xx:xx:xx”
Show P2P device address “xx:xx:xx:xx:xx:xx”
Click on the first or last page to see other HT-NT3 service manuals if exist.