DOWNLOAD Sony HT-NT3 Service Manual ↓ Size: 7.95 MB | Pages: 96 in PDF or view online for FREE

1

3

4

5

8

2

7

6

9

0

qa

4

Note: When you install the heat sink, AMP 

 

 

spread the compound referring to “NOTE 

 

 

OF REPLACING THE IC6001 ON THE 

 

 

AMP BOARD AND THE COMPLETE

 

 

AMP BOARD” on page 5.

qa

0

qs

5

6

8

7

2

1

9

3

A

A

3

4

6

2

1

7

8

9

5

• Abbreviation
 AUS  

: 

Australian 

model

  RU 

 : Russian model

COLD  RESET
The cold reset clears certain data in this system without initialize 
Personal Information and some operation data.
Execute this mode when returning the unit to the customers.

Procedure:
1.  Press the [

?/1

] button on the main unit to turn the power on.

2.  Press the [

?/1

] button and [VOL -] button on the main unit 

simultaneously for fi ve seconds.

3.  The message “WAIT” appears and then “RESET” appears on 

the fl uorescent indicator tube, then becomes standby states.

Procedure:
1.  Press the [

?/1

] button on the main unit to turn the power on.

2.  Press button in order of the [

x

] 

→ [DISPLAY] → [

m

] 

→ [

M

]  

on the remote commander. 

 

(Make the interval when each button is pressed within two sec-
onds).

3.  All segments in fl uorescent indicator tube are lighted up and 

then is dimmed after a second.

4.  In the state of step 3, press the [INPUT +] button on the remote 

commander and “K 0” is displayed on the fl uorescent indicator 
tube.

5.  In the state of step 4, press the [VOL +] button on the remote 

commander and “SZ_A” is displayed on the fl uorescent indi-
cator tube.

6.  In the state of step 5, press the [VOL -] button on the remote 

commander and all segments in fl uorescent indicator tube are 
lighted up and then is dimmed after a second.

7.  In the state of step 6, press the [

x

] button on the remote com-

mander and “1   24” is displayed on the fl uorescent indicator 
tube.

Releasing method:
To release from this mode, press the [

?/1

] button on the main unit 

or press the [

?/1

] button on the remote commander.

Procedure:
1.  Touch the [

?/1

] touch key on the main unit to turn the power 

on.

2.  Press button in order of the [

x

] 

→ [DISPLAY] → [VOL -] → 

[

M

] on the remote commander.

 

The messsage “MSURE” is displayed on the fl uorescent indi-
cator tube.

3.  In the state of step 2, press [DIMMER] button on the remote 

commander.

 

The message will appear in order of the “FULL” 

→ “THRU” 

→ “F2S” → “F2SB” → “F2CW” on the fl uorescent indicator 
tube.

4.  In the state of step 3, press [

m

] button on the remote com-

mander.

 

The message will appear in order of the “A.OFF” 

→ “A.ON” 

on the fl uorescent indicator tube.

5.  In the state of step 4, press [

%

] button on the remote com-

mander.

 

The message will appear in order of the “V.N” 

→ “V.MSM” on 

the fl uorescent indicator tube.

6.  In the state of step 5, press [CLEARAUDIO+] button on the 

remote commander.

 

The message will appear in order of the “VAON” 

→ “VAOFF” 

on the fl uorescent indicator tube.

7.  In the state of step 6, press [VOICE] button on the remote com-

mander to adjust the volume gain.

 

It can be adjusted between -3.0 to +3.0 (increase everytime 0.1 
step).

 

Eg: When gain +1.0 dB by pressing the [VOICE] button, the 
message “G +1.0” will appear on the fluorescent indicator 
tube.

8.  In the state of step 7, press [NIGHT] button on the remote 

commander to adjust the volume gain.

 

It can be adjusted between +3.0 to -3.0 (decrease everytime 0.1 
step).

 

Eg: When gain -1.0 dB by pressing the [NIGHT] button, the 
message “G -1.0” will appear on the fluorescent indicator tube.

WIRELESS  SOUND  TEST  MODE
It can display the 

μ-com version of Subwoofer (SA-WNT3).

Note : More than one item may be displayed on the fl uorescent indicator 

tube, but it is not used for the servicing other than “VER”.

•  Prepare the remote commander attached to this unit.
 Remote 

commander:

 

RM-AH110U (US and Canadian models)

 

RM-AH110E (Except US and Canadian models)

•  Connect the Bar Speaker (SA-NT3) and the Subwoofer (SA-WNT3) 
 by 

wireless.

Procedure:
1.  Press button in order of the [

x

] 

→ [DISPLAY] → [CLEAR 

AUDIO+] 

→ [

M

] on the remote commander.

2.  The message “FACTR” is displayed on the fl uorescent indica-

tor tube and enter the wireless sound test mode.

3. Press 

the 

[

M

]/[

m

] buttons on the remote commander, select the 

“VER”, and press the [

] button on the remote commander.

4. The 

μ-com version of Subwoofer (SA-WNT3) is displayed on 

the fl uorescent indicator tube. For example, 0.12A.

5. When [

M

]/[

m

] buttons on the remote commander is pressed 

while the 

μ-com version of Subwoofer (SA-WNT3) is dis-

played on the fl uorescent indicator tube, year, month and day 
of the creation is displayed on the fl uorescent indicator tube. 
For example, 41027.

 When 

[

M

]/[

m

] buttons on the remote commander is pressed 

again, the display returns to the 

μ-com version of Subwoofer 

(SA-WNT3) display.

Releasing method:
Press the [

?/1

] button to release the test mode menu.