DOWNLOAD Sony HT-DDW790 / HT-DDW795 / STR-K790 Service Manual ↓ Size: 4.89 MB | Pages: 56 in PDF or view online for FREE

5

;

;

;

1

2

3

4

5

6

8

7

qs

qa

9

q;

A

Lights up when audio signal is 
output from the SUB WOOFER 
jack.

B

Lights up when the disc being 
played back contains an LFE 
(Low Frequency Effect) 
channel and the LFE channel 
signal is actually being 
reproduced.

C ;

Lights up when the receiver is 
decoding Dolby Digital signals.

D ; 

; 

“; PL” lights up when the 
receiver applies Pro Logic 
processing to 2 channel signals 
in order to output the center and 
surround channel signals.
“; PLII” lights up when the 
Pro Logic II Movie/Music 
decoder is activated.
Note
Dolby Pro Logic and Dolby Pro 
Logic II decoding do not 
function for DTS format 
signals.

E

Lights up when VIDEO 2 input 
is selected. However, 
“UNLOCK” appears on the 
display if no digital signal is 
input through the OPTICAL 
jack.

F

Lights up when the receiver is 
decoding DTS signals. 

G

Lights up when a memory 
function, such as Name Input, 
Preset Memory, etc., is 
activated.

H

Lights up when using the 
receiver to tune in radio stations,

 etc.

Note
“RDS” appears for models of 
area code AEP, UK only.

I

Lights up when using the 
receiver to tune in radio stations 
you have preset. For details on 
presetting radio stations.

J

Lights up when dynamic range 
compression is activated. 

K

Lights up when DVD input is 
selected. However, 
“UNLOCK” appears on the 
display if no digital signal is 
input through the COAXIAL 
jack.

L

The letters (L, C, R, etc.) 
indicate the channels being 
played back. The boxes around 
the letters vary to show how the 
receiver downmixes the source 
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the 
surround components obtained 
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO

6

* The numbers of the SUB WOOFER terminals 

varies depending on the models.

1

2

4

3

SUB

WOOFER

SURROUND

DVD 

IN

OPTICAL

VIDEO 2/

BD IN

COAXIAL

AM

AUDIO IN

AUDIO IN

AUDIO IN

FRONT

CENTER

A

OPTICAL
IN jack

Connects to a DVD 
player, etc. The 
COAXIAL jack 
provides a better 
quality of loud 
sound.

COAXIAL IN 
jack

B

FM
ANTENNA 
jack

Connects to the 
FM wire antenna 
supplied with this 
receiver. 

AM 
ANTENNA 
terminals

Connects to the 
AM loop antenna 
supplied with this 
receiver. 

C

AUDIO IN 
jacks

Connects to a CD 
player, etc. 

D

Connects to the 
speakers and sub 
woofer*.

White (L)

Red (R)

* You can watch the selected input image when you 

connect the HDMI OUT jack to a TV or projector. 

VIDEO 2 /BD IN

DVD IN

OUT

1

2

3

4

DVD

IN

OPTICAL

VIDEO 2/

BD IN

COAXIAL

AM

AUDIO IN

AUDIO IN

AUDIO IN

FRONT

CENTER

SURROUND

SUB

WOOFER

A

OPTICAL
IN jack

Connects to a DVD 
player, etc. The 
COAXIAL jack 
provides a better 
quality of loud 
sound.

COAXIAL IN 
jack

HDMI IN/ 
OUT jacks*

Connects to a DVD 
player, etc. The 
image and the 
sound are output to 
a TV or a projector. 

B

FM
ANTENNA 
jack

Connects to the 
FM wire antenna 
supplied with this 
receiver.

AM 
ANTENNA 
terminals

Connects to the 
AM loop antenna 
supplied with this 
receiver.

C

AUDIO IN 
jacks

Connects to a CD 
player, etc..

D

Connects to the 
speakers and sub 
woofer.

White (L)

Red (R)

7

You can use the supplied remote
RM-AAU013 to operate the receiver and to 
control the Sony audio/video components that 
the remote is assigned to operate.

?/1

?/1

?/1

-

F

G

g

f

.

H

m

M

X

x

<

<

>

wd

qj

ql

qk

w;

wa

ws

qg

1

3

2

6

7

8

q;

9

qf

qs

qa

4

5

qd

qh

A

?

1

Press TV ?/1 and TV (O) at 
the same time to turn the TV 
on or off.

?

1

Press to turn on or off the 
Sony audio/video components 
that the remote is assigned to 
operate.
If you press ?/1 (B) at the 
same time, it will turn off the 
receiver and other 
components (SYSTEM 
STANDBY).
Note
The function of the AV ?/1 
switch changes automatically 
each time you press the input 
buttons (C).

B ?

1

Press to turn the receiver on or 
off.
To turn off all components, 
press ?/1 and AV ?/1 (A) at 
the same time (SYSTEM 
STANDBY).

C

Press one of the buttons to 
select the component you 
want to use. When you press 
any of the input buttons, the 
receiver turns on. The buttons 
are factory assigned to control 
Sony components as follows. 

VIDEO 1

VCR (VTR mode 3)

VIDEO 2

VCR (VTR mode 2)

VIDEO 3

Not assigned

DVD

DVD player

SAT

Satellite tuner

TV

Television

SA-CD/CD Super Audio CD/CD 

player

TUNER

Built-in tuner

Insert two R6 (size-AA) batteries in the 
RM-AAU013 remote commander.
Observe the correct polarity when installing 
batteries.

• Do not leave the remote in an extremely hot or 

humid place.

• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of 

batteries.

• Do not expose the remote sensor to direct sunlight 

or lighting apparatuses. Doing so may cause a 
malfunction.

• If you do not intend to use the remote for an 

extended period of time, remove the batteries to 
avoid possible damage from battery leakage and 
corrosion.

• When you replace the batteries, the remote buttons 

may be reset to their factory settings. If this 
happens, reassign the button again. 

Under normal conditions, the batteries should last 
for about 3 months. When the remote no longer 
operates the receiver, replace all the batteries with 
new ones.

8

D

Press to select 2CH STEREO 
mode.

Press to select A.F.D. mode.

Press to select sound fields 
(MOVIE, MUSIC).

E

Press to display the menu of 
the receiver. Then, use V, v, B, 
b and 

 to perform menu 

operations.

F

Press to select FM monaural or 
stereo reception.

G

Press to enter direct tuning 
mode.

Press to skip disc of the CD 
player or DVD player (multi-
disc changer only).

H

Press to display the menu of 
the DVD player on the TV 
screen. Then, use V, v, B, b 
and  

to perform menu 

operations.

I

Press to enter the value after 
selecting a channel, disc or 
track using the numeric 
buttons of the TV, VCR or 
satellite tuner.

Press to store a station.

J

Press to display options 
applicable to the entire disc 
(e.g. disc protection), recorder 
(e.g. audio settings during 
recording), or multiple items 
on a list menu (e.g. erasing 
multiple titles). 
Press TOOLS and TV (O) at 
the same time to display 
options applicable to the TV.

K

Press to activate muting 
function.
Press MUTING and TV (O) 
at the same time to activate the 
TV’s muting function.

L

Press TV VOL +/– and TV 
(O) at the same time to adjust 
the TV volume level.

*

Press to adjust the volume 
level of all speakers at the 
same time.

M

Press to display the menus of 
the VCR, DVD player, Blu-ray 
disc player or satellite tuner on 
the TV screen.
Press MENU and TV (O) at 
the same time to display the 
TV’s menu. Then, use V, v, B, 
b and 

 to perform menu 

operations.

N .

>

Press to skips tracks of the CD 
player, DVD player or Blu-ray 
disc player.

m

M

Press to search tracks in the 
forward/backward direction of 
the DVD player or to fast 
forward/rewind of the VCR, 
CD player or Blu-ray disc 
player.

H*

Press to start playback of the 
VCR, CD player, DVD player 
or Blu-ray disc player.

X

Press to pause playback or 
recording of the VCR, CD 
player, DVD player or Blu-ray 
disc player. (Also starts 
recording with components in 
recording standby.)

x

Press to stop playback of the 
VCR, CD player, DVD player 
or Blu-ray disc player.

Press TV CH +/– and TV (O) 
at the same time to select 
preset TV channels.

Press to select preset stations 
or preset channels of the VCR 
or satellite tuner.

Press to scan a station.

O

Press TV and the button you 
want at the same time to 
activate the buttons with 
orange printing.

P

Press to replay the previous 
scene or fast forward the 
current scene of the VCR, Blu-
ray disc player or DVD player.

<

<