Sony DCR-DVD106E / DCR-DVD108 / DCR-DVD108E / DCR-DVD109E / DCR-DVD608 / DCR-DVD608E (serv.man4) Service Manual ▷ View online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.5 2008.04
9-852-173-53
2008D0500-1
© 2008.4
Published by Kohda TEC
• Use this Service Manual together with the Automatic Adjustment Program (DCR-DVD108 Series Auto-Adj
Ver_1.5r05.exe) and the AUDIT (Drive Adjustment Program).
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_ADJ
Link
Link
LCD/EVF SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
USB SERIAL No. INPUT
DESTINATION DATA WRITE
ADJUSTMENT PROGRAM
AUDIO SYSTEM ADJUSTMENTS
ERROR
POWER ADJUSTMENT
DIAGNOSIS
TROUBLESHOOTING
SERVO ADJUSTMENT
AUDIT (Drive Adjustment Program)
PREPARATIONS BEFORE ADJUSTMENTS
DRIVE SECTION ADJUSTMENTS
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
DCR-DVD106E/DVD108/DVD108E/
DVD109E/DVD608/DVD608E
— 2 —
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_ADJ
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF
MORE THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF
MORE THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Optical sensor disc (J-6082-570-A)
CAUTION
In the process of adjusting optical power,
CLASS1M laser optical radiates. so do not
remove this sensor disk.
CLASS1M laser optical radiates. so do not
remove this sensor disk.
— 3 —
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_ADJ
TABLE OF CONTENTS
*
The optical axis frame is shown on page 6-55.
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1-1.
1-1.
Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-1
Boards ·············································································· 6-1
1-2.
List of Service Tools ························································ 6-3
6-1.
Camera Section Adjustments ··········································· 6-5
1-1.
Preparations before Adjustments
(CAMERA Section) ························································ 6-5
(CAMERA Section) ························································ 6-5
1-2.
Adjustment Program ························································ 6-7
1-3.
Destination Data Write ···················································· 6-9
1-4.
USB Serial No. Input ····················································· 6-11
1-5.
Video System Adjustments ············································ 6-12
1-6.
Camera System Adjustments ········································· 6-15
1-7.
LCD/EVF System Adjustments ····································· 6-27
1-8.
Audio System Adjustments ··········································· 6-30
1-9.
Error ··············································································· 6-32
6-2.
Drive Section Adjustments ············································ 6-34
2-1.
Preparations before Adjustments (Drive Section) ········· 6-34
2-2.
AUDIT (Drive Adjustment Program) ···························· 6-37
2-3.
Diagnosis ······································································· 6-39
2-4.
Power Adjustment ························································· 6-42
2-5.
Servo Adjustment ·························································· 6-43
2-6.
Troubleshooting ····························································· 6-45
6-3.
Service Mode ································································· 6-50
3-1.
Application for Adjustment (SeusEX) ·························· 6-50
3-2.
Service Mode ································································· 6-51
3-3.
Data Backup ·································································· 6-54
Section
Title
Page
Ver. 1.5 2008.04
6-1
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_ADJ
6. ADJUSTMENTS
Table 6-1-1 (1)
1-1. Adjusting items when replacing main parts and boards
•
Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support.
Note 2:
DCR-DVD109E only
Before starting adjustments
Lens device
Drive block
LCD block LCD901 (LCD panel)
EVF block LCD902 (LCD panel)
Microphone unit MIC901
CD-686 board IC7101 (CCD imager )
BL-006 board D5902 (EVF backlight)
PD-314 board D6403 - 6405 (LCD backlight)
VC-483 board IC2101, X2101 (Timing generator)
VC-483 board IC1602 (S/H, AGC, A/D converter)
VC-483 board IC2901 (D/A converter)
VC-483 board IC3401 (Video, Audio I/O)
VC-483 board IC3601 (MIC AMP)
VC-483 board IC3602 (A/D converter)
VC-483 board IC3701 (LCD/EVF driver)
VC-483 board IC4101 (RF process)
VC-483 board IC4201 (DVD DSP)
VC-483 board IC4401 (DVD mecha drive)
Destination
Data Write
Data Write
Destination data write
USB Serial No.
Input
Input
USB serial No. input
(Note 1)
Origin oscillation check
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
S VIDEO OUT chroma level adj.
VIDEO OUT level check
CAMERA
adjustment 1
adjustment 1
HALL adj.
z
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
CAMERA
adjustment 4
adjustment 4
Optical axis adj.
z
z
F No. standard data input
MAX GAIN adj.
Color reproduction adj.
Color reproduction check
AWB standard data input
LV standard data input
AWB adj.
AWB check
LCD automatic adj. (VCO adj, Contrast adj.)
V-COM adj.
MAX GAIN adj.
Color reproduction adj.
Color reproduction check
AWB standard data input
LV standard data input
AWB adj.
AWB check
LCD automatic adj. (VCO adj, Contrast adj.)
V-COM adj.
Transmissive moed white balance adj.
EVF automatic adj. (VCO adj, Contrast adj.)
White balance adj.
EVF automatic adj. (VCO adj, Contrast adj.)
White balance adj.
AUDIO
ajustment
ajustment
Accessory 3ch microphone sensitivity adj.
(Note 2)
(Note 2)
z
z
z
z
POWER adj.
z
z
z
z
SERVO adj.
z
z
z
z
LCD
adjustment
adjustment
Replaceed parts
Parts replacement
Adjusting item
VIDEO
adjustment
adjustment
Block replacement
Adjustment
EVF
adjustment
adjustment
z
AUDIT
Touch panel adj.
Touch panel
adjustment
adjustment
z
z
z
z
z
z
z
z
z
z
z
z
z
CAMERA
adjustment 5
adjustment 5
CAMERA
adjustment 6
adjustment 6
CAMERA
adjustment 7
adjustment 7
z
z
z
z
z
z
Ver. 1.5 2008.04
