Sony HT-CT780 Service Manual ▷ View online
HT-CT780
9
2-3. HOW TO INSTALL THE CONNECTION CABLE WITH SPEAKER (L-CH, R-CH) (SPC1, SPC2)
1 Connect the terminal
[gray] (wide side).
5 Connect the terminal
[black] (narrow side).
6 Connect the terminals
[black] and [blue] (wide side).
8 Connect the terminals
[gray] and [black] (narrow side).
9 Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC1).
qf Paste the cushion (CZ).
qf Paste the cushion (CZ).
0 Pass the cable underneath catcher.
7 Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC1).
2 Push the cable
into the slots.
qs Push the cable
into the slot.
3 Pass the cable underneath catcher.
qd Pass the cable
underneath
catcher.
4 Pass the cable along the rib.
qa Pass the cable along the speaker (19 mm).
1 Connect the terminal
[red] (wide side).
5 Connect the terminal
[black] (narrow side).
6 Connect the terminals
[black] and [blue] (wide side).
8 Connect the terminals
[gray] and [black] (narrow side).
9 Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC2).
qf Paste the cushion (CZ).
qf Paste the cushion (CZ).
0 Pass the cable underneath catcher.
7 Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC2).
2 Push the cable
into the slots.
qs Push the cable
into the slot.
3 Pass the cable underneath catcher.
qd Pass the cable
underneath
catcher.
4 Pass the cable along the rib.
qa Pass the cable along the speaker (19 mm).
rear side
front side
left side
left side
right side
right side
top block
(Inner side)
bottom block
bottom block
CN501
CN502
Push
Push
Push
Push
Push
Push
Push
Push
Push
Push
– Left side –
– Right side –
HT-CT780
10
2-4. SPEAKER (60 mm) (L-CH, R-CH) (SP1, SP2), SPEAKER (19 mm) (L-CH, R-CH) (SP3, SP4)
2 speaker (60 mm)
(R-ch)
(SP2)
1 four screws
(3.5
u 10)
– Top panel block bottom view –
Note: Please spread a sheet under a
unit not to injure top panel.
rear side
top block
front side
left side
right side
6SHDNHUPP5FK63DQG
VSHDNHUPP5FK63setting
VSHDNHUPP5FK63setting
speaker (60 mm)
(R-ch) (SP2)
(R-ch) (SP2)
wide terminal side
red line
narrow terminal side
front side
front side
4 speaker (19 mm)
(L-ch)
(SP3)
3 two screws
(3.5
u 10)
4 speaker (19 mm)
(R-ch)
(SP4)
3 two screws
(3.5
u 10)
2 speaker (60 mm)
(L-ch)
(SP1)
1 four screws
(3.5
u 10)
speaker (19 mm)
(R-ch) (SP4)
(R-ch) (SP4)
right side
right side
[black]
[blue]
left side
left side
6SHDNHUPP/FK63DQG
VSHDNHUPP/FK63setting
VSHDNHUPP/FK63setting
speaker (60 mm)
(L-ch) (SP1)
(L-ch) (SP1)
speaker (19 mm)
(L-ch) (SP3)
(L-ch) (SP3)
wide terminal side
red line
narrow terminal side
[black]
[blue]
HT-CT780
11
2-5. NFC MODULE (NFC1)
Note: Please spread a sheet under a
unit not to injure top panel.
– Top panel block bottom view –
– NFC module bottom view –
3 Peel off the double
adhesive tape (NFC).
4 NFC module
(NFC1)
1 cushion (QV, A)
2 flexible flat cable
(6 core) (FFC4)
)OH[LEOHIODWFDEOH))&VHWWLQJ
NFC module
(NFC1)
(NFC1)
flexible flat cable
(6 core) (FFC4)
(6 core) (FFC4)
Terminal face is
below side.
below side.
rear side
front side
top block
guide line
left side
right side
colored line
Insert straight into the interior.
flexible flat
cable
cable
connector
OK
colored line
Insert at a slant.
flexible flat
cable
cable
connector
NG
+RZWRLQVWDOOWKHIOH[LEOHIODWFDEOH
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
+RZWRLQVWDOOWKHGRXEOHDGKHVLYHWDSH1)&
double adhesive
tape (NFC)
tape (NFC)
NFC module (NFC1)
HT-CT780
12
2-6. FL BOARD
4 cushion (QV, A)
5 flexible flat cable
(6 core) (FFC4) (CN804)
3 flexible flat cable
(18 core) (FFC3) (CN803)
1 screw
(BVTP3
u 10)
1 two screws
(BVTP3
u 10)
1 screw
(BVTP3
u 10)
6 four screws
(BVTP3
u 10)
7 holder FL block
8 cushion (CZ)
9 FL board
2 Remove the FL board block
in the direction of the arrow.
FL board block
FL board block
FL board
terminal side
ReplacHWKHIOH[LEOHIODWFDEOHZLWKWKHFXVKLRQ
WRWKHIOH[LEOHIODWFDEOHZLWKRXWWKHFXVKLRQ
5HSODFHWKHIOH[LEOHIODWFDEOHZLWKWKHFXVKLRQ
5HSODFHWKHIOH[LEOHIODWFDEOHZLWKWKHFXVKLRQ
WRWKHIOH[LEOHIODWFDEOHZLWKWKHFXVKLRQ
5HSODFHWKHIOH[LEOHIODWFDEOHZLWKRXWWKHFXVKLRQ
5HSODFHWKHIOH[LEOHIODWFDEOHZLWKRXWWKHFXVKLRQ
WRWKHIOH[LEOHIODWFDEOHZLWKRXWWKHFXVKLRQ
5HSODFHWKHIOH[LEOHIODWFDEOHZLWKRXWWKHFXVKLRQ
WRWKHIOH[LEOHIODWFDEOHZLWKWKHFXVKLRQ
terminal side
cushion (QV, A)
flexible flat cable (6 core) (FFC4)
flexible flat cable
(18 core) (FFC3)
(18 core) (FFC3)
)OH[LEOHIODWFDEOH))&VHWWLQJ
)OH[LEOHIODWFDEOH))&VHWWLQJ
+RZWRLQVWDOOWKHFXVKLRQ&=
cushion (CZ)
–7RSSDQHOEORFNERWWRPYLHZ–
rear side
front side
top block
left side
right side
colored line
Insert straight into the interior.
flexible flat
cable
cable
connector
OK
colored line
Insert at a slant.
flexible flat
cable
cable
connector
NG
+RZWRLQVWDOOWKHIOH[LEOHIODWFDEOH
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
Note 1: Flexible flat cable (18 core) (FFC3) have been changed
to without the cushion from the midway of production.
When replacing the flexible flat cable (18 core) (FFC3),
check whether the cushion is affixed, and be careful
about the following notes.
OK
NG
Note 2: Please spread a sheet under a
unit not to injure top panel.
Ver. 1.2
Click on the first or last page to see other HT-CT780 service manuals if exist.