Sony HT-7100DH / STR-K7100 Service Manual ▷ View online
5
STR-K7100
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
5
US
Getting Star
ted
Description and location of parts
Front panel
Getting Started
Receiver
? / 1
AUTO CAL MIC
SPEAKERS
(OFF/A/B/A+B)
PHONES
VIDEO 3 IN/PORTABLE AV IN
VIDEO
L AUDIO R
MEMORY/
ENTER
TUNING
MODE
TUNING
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
MUTING
DISPLAY
INPUT MODE
INPUT SELECTOR
MASTER VOLUME
MULTI CHANNEL DECODING
3
7
5
q;
9
qa
qs
qd
w;
qf
qg
qh
qj
qk
ql
1
2
8
6
4
Name
Function
A ?/1
(on/standby)
Press to turn the receiver on
or off (page 27, 36, 37, 52,
81).
or off (page 27, 36, 37, 52,
81).
B SPEAKERS
(OFF/A/B/A+B)
Press to select the speaker
system (page 28).
system (page 28).
C Display
The current status of the
selected component or a list
of selectable items appears
here (page 7).
selected component or a list
of selectable items appears
here (page 7).
D MULTI
CHANNEL
DECODING
lamp
DECODING
lamp
Lights up when multi
channel audio is decoded
(page 37).
channel audio is decoded
(page 37).
E Remote sensor
Receives signals from
remote commander.
remote commander.
Name
Function
F DISPLAY
Press to select information
displayed on the display
(page 68).
displayed on the display
(page 68).
G INPUT MODE
Press to select the input
mode when the same
components are connected
to both digital and analog
jacks (page 63).
mode when the same
components are connected
to both digital and analog
jacks (page 63).
H MASTER
VOLUME
Turn to adjust the volume
level of all speakers at the
same time (page 33, 34,
36, 37).
level of all speakers at the
same time (page 33, 34,
36, 37).
I MUTING
Press to mute the sound
(page 34).
(page 34).
J AUTO CAL
Press to activate the Auto
Calibration function
(page 29).
Calibration function
(page 29).
continued
6
US
Name
Function
K INPUT
SELECTOR
Turn to select the input
source to playback (page
34, 36, 37, 53, 55, 63, 65,
69).
source to playback (page
34, 36, 37, 53, 55, 63, 65,
69).
L MOVIE,
MUSIC
Press to select sound fields
(MOVIE, MUSIC) (page
49).
(MOVIE, MUSIC) (page
49).
M A.F.D.
Press to select A.F.D.
mode (page 47).
mode (page 47).
N 2CH
Press to select 2CH
STEREO mode (page 51,
52).
STEREO mode (page 51,
52).
O TUNING +/–
Press to scan a station
(page 53, 54).
(page 53, 54).
P TUNING MODE
Press to select the tuning
mode (page 55, 81).
mode (page 55, 81).
Q MEMORY/ENTER Press to store a station or
enter the selection when
selecting the settings
(page 27).
selecting the settings
(page 27).
R VIDEO 3 IN/
PORTABLE AV IN
jacks
jacks
Connect to camcorder or
video game (page 25, 34).
video game (page 25, 34).
S AUTO CAL MIC
jack
Connects to the supplied
optimizer microphone for
the Auto Calibration
function (page 29).
optimizer microphone for
the Auto Calibration
function (page 29).
T PHONES jack
Connects to a headphone
(page 78).
(page 78).
7
US
Getting Star
ted
About the indicators on the display
MEMORY
L
C
R
SL
S
SR
SW
LFE
SP A
SP B
SP B
D.RANGE
MONO
ST
COAX
D
;
DTS
OPT
PL II
CAT
;
PL
;
2
1
4
3
5
6
7
8
qd
qs
9
q;
qa
Name
Function
A SW
Lights up when the audio signal
is output from the SUB
WOOFER jack.
is output from the SUB
WOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
D ;D
Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 63).
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 63).
E ;PL/
;PL II
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PL II” lights up when the
Pro Logic II Movie or Music
decoder is activated.
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PL II” lights up when the
Pro Logic II Movie or Music
decoder is activated.
Name
Function
F OPT
Lights up when VIDEO 2 input
is selected. However,
“UNLOCK” appears on the
display if no digital signal is
input through the OPTICAL
jack.
“OPT” also lights up when SAT
input is selected if
– INPUT MODE is set to
is selected. However,
“UNLOCK” appears on the
display if no digital signal is
input through the OPTICAL
jack.
“OPT” also lights up when SAT
input is selected if
– INPUT MODE is set to
“AUTO IN” and the source
signal is a digital signal being
input through the OPTICAL
jack.
signal is a digital signal being
input through the OPTICAL
jack.
– INPUT MODE is set to “OPT
IN” (page 63).
G DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 63).
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 63).
H Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 52), etc.
receiver to tune in radio stations
(page 52), etc.
I Preset
station
indicators
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 54.
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 54.
J D.RANGE
Lights up when dynamic range
compression is activated (page
41).
compression is activated (page
41).
continued
8
US
Name
Function
K MEMORY
Lights up when a memory
function, such as Preset
Memory (page 54), etc., is
activated.
function, such as Preset
Memory (page 54), etc., is
activated.
L COAX
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN” (page 63).
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN” (page 63).
M Playback
channel
indicators
indicators
L
R
C
SL
SR
S
R
C
SL
SR
S
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
L
C
R
SL
SR
SW
6
STR-K7100
9
US
Getting Star
ted
Rear panel
OPTICAL
SAT
IN
VIDEO 2/
BD IN
DVD
IN
COAXIAL
DVD IN
VIDEO 2/BD IN
OUT
AM
L
R
OUT
IN
IN
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
AUDIO OUT AUDIO IN
AUDIO IN
AUDIO IN
CENTER
SURROUND
FRONT A
FRONT B
L
L
L
R
R
R
SAT IN
DVD IN
VIDEO 1 IN MONITOR OUT
P
B
/C
B
P
R
/C
R
COMPONENT VIDEO
SPEAKERS
DIGITAL
(ASSIGNABLE)
ANTENNA
DMPORT
SAñCD/CD/CDñR
TV
HDMI
MONITOR
DVD
VIDEO 1
SUB
WOOFER
SAT
XM
Y
L
L
R
L
R
R
AUDIO OUT
VIDEO OUT
1
2
5
3
4
6
A DIGITAL INPUT/OUTPUT section
OPTICAL
IN jack
IN jack
Connects to a DVD
player, etc. The
COAXIAL jack
provides a better
quality of loud
sound (page 20,
24).
player, etc. The
COAXIAL jack
provides a better
quality of loud
sound (page 20,
24).
COAXIAL IN
jack
jack
HDMI IN/
OUT jack
OUT jack
a)
Connects to a DVD
player, or a Blu-ray
disc player. The
image and the
sound are output to
a TV or a projector
(page 22).
player, or a Blu-ray
disc player. The
image and the
sound are output to
a TV or a projector
(page 22).
Connect to a
DIGITAL MEDIA
PORT adapter
(page 64).
DIGITAL MEDIA
PORT adapter
(page 64).
B COMPONENT VIDEO INPUT/
OUTPUT section
COMPONENT
VIDEO
INPUT/
OUTPUT
jack
VIDEO
INPUT/
OUTPUT
jack
a)
Connects to a DVD
player, TV,
satellite tuner, etc.
You can enjoy high
quality image
(page 19, 21, 24).
player, TV,
satellite tuner, etc.
You can enjoy high
quality image
(page 19, 21, 24).
Green
Blue
Red
C SPEAKER section
Connects to
speakers (page 16).
speakers (page 16).
Connects to sub
woofer (page 16).
woofer (page 16).
D VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/
OUT jack
OUT jack
Connects the video
and audio jacks of
a VCR or a DVD
player (page 19,
20, 21, 24, 25).
and audio jacks of
a VCR or a DVD
player (page 19,
20, 21, 24, 25).
VIDEO IN/
OUT jack
OUT jack
a)
White (L)
Red (R)
Yellow
continued
10
US
a)
You can watch the selected input image when you
connect the HDMI OUT or MONITOR OUT jack
to a TV (page 19).
connect the HDMI OUT or MONITOR OUT jack
to a TV (page 19).
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote” (page
70).
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote” (page
70).
RM-AAP016
E AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jack
OUT jack
Connects to Super
Audio CD player
or CD player, etc.
(page 17).
Audio CD player
or CD player, etc.
(page 17).
F ANTENNA section
FM
ANTENNA
jack
ANTENNA
jack
Connects to the
FM wire antenna
supplied with this
receiver (page 26).
FM wire antenna
supplied with this
receiver (page 26).
AM
ANTENNA
terminals
ANTENNA
terminals
Connects to the
AM loop antenna
supplied with this
receiver (page 26).
AM loop antenna
supplied with this
receiver (page 26).
XM terminal
Connects to the
XM connect-and-
Play antenna (not
supplied with this
receiver) (page
57).
XM connect-and-
Play antenna (not
supplied with this
receiver) (page
57).
White (L)
Red (R)
Remote commander
G
f
F
g
GUIDE
DISPLAY
MEMORY
-/--
>
10
DVD
m
M
.
>
TV
VIDEO 1
VIDEO 2
VIDEO 3
SYSTEM STANDBY
DVD
TUNER
SA-CD//CD
TV
SAT
AUX
DMPORT
RECEIVER
?
/
1
1
O
CLEAR
ENTER
0//10
8
7
4
1
2
3
6
9
5
RM SET UP AV ?/
/1
SLEEP
CATEGORY
MODE
AUTO CAL
2CH
A.F.D.
MOVIE
MUSIC
TOP MENU
MUTING
MENU
F 1
F 2
TV INPUT
WIDE
TV VOL
MASTER VOL
TV CH
PRESET
REPLAY
ñ
CATEGORY
+
ADVANCE
TUNING
+
TUNING
ñ
DISC SKIP
RETURN//
EXIT
MENU
OPTIONS
TOOLS
w;
ws
wd
wg
wh
6
8
7
9
q;
qs
qf
5
4
1
2
3
qh
wf
qk
ql
qj
qd
qg
wj
qa
wa
D.TUNING
11
US
Getting Star
ted
Name
Function
A AV ?/1
(on/standby)
Press to turn on or off the audio/
video components that the
remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV ?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
video components that the
remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV ?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
B ?/1
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You
can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 70.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You
can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 70.
D RECEIVER
Press to activate the receiver
operation (page 33).
operation (page 33).
Button
Assigned Sony
component
component
VIDEO 1
VCR (VTR mode 3)
VIDEO 2
VCR (VTR mode 2)
VIDEO 3
VCR (VTR mode 1)
DVD
DVD player
SAT
Satellite tuner
TV
TV
SA-CD/CD Super Audio CD/CD
player
TUNER
Built-in tuner
AUX
Not assigned
DMPORT
DIGITAL MEDIA
PORT adapter
PORT adapter
Name
Function
E MUSIC
Press to select sound fields
(MUSIC).
(MUSIC).
2CH
Press to select 2CH STEREO
mode.
mode.
A.F.D.
Press to select A.F.D. mode.
MOVIE
Press to select sound fields
(MOVIE).
(MOVIE).
F D. TUNING
Press to enter direct tuning
mode.
mode.
G AUTO CAL
Press to activate the Auto
Calibration function.
Calibration function.
H Numeric
buttons
(number 5
(number 5
a)
)
Press the numeric buttons to
– preset/tune to preset stations.
– select track numbers of the
– preset/tune to preset stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
– select channel numbers of the
TV, VCR, satellite tuner, Blu-
ray disc recorder, hard disc
recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO.
Press TV (Z) and then press
the numeric buttons to select
the TV channels.
ray disc recorder, hard disc
recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO.
Press TV (Z) and then press
the numeric buttons to select
the TV channels.
I MEMORY
Press MEMORY to store a
station.
station.
ENTER
Press to enter the value after
selecting a channel, disc or track
using the numeric buttons of the
VCR, CD player, VCD player,
LD player, MD deck, DAT deck,
tape deck, satellite tuner, Blu-ray
disc recorder or PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
selecting a channel, disc or track
using the numeric buttons of the
VCR, CD player, VCD player,
LD player, MD deck, DAT deck,
tape deck, satellite tuner, Blu-ray
disc recorder or PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
J DISPLAY
Press to select information
displayed on the TV screen of
the TV, VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
displayed on the TV screen of
the TV, VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
continued
12
US
Name
Function
K OPTIONS
TOOLS
Press to display and select items
from the option menus for DVD
player or DVD/VHS COMBO.
To display the options of Sony
TV, press TV (Z) and then
press OPTIONS TOOLS.
from the option menus for DVD
player or DVD/VHS COMBO.
To display the options of Sony
TV, press TV (Z) and then
press OPTIONS TOOLS.
L MENU
Press to display the menus of
the receiver, VCR, DVD
player, satellite tuner, Blu-ray
disc recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO on the TV screen.
Then, use the V/v/B/b and
to perform menu operations. To
display the menus of Sony TV,
press TV (Z) and then press
MENU.
the receiver, VCR, DVD
player, satellite tuner, Blu-ray
disc recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO on the TV screen.
Then, use the V/v/B/b and
to perform menu operations. To
display the menus of Sony TV,
press TV (Z) and then press
MENU.
M H
a) b)
Press to start playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
X
b)
Press to pause playback or
recording of the VCR, CD
player, VCD player, LD player,
DVD player, MD deck, DAT
deck, tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO. (Also starts
recording with components in
recording standby.)
recording of the VCR, CD
player, VCD player, LD player,
DVD player, MD deck, DAT
deck, tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO. (Also starts
recording with components in
recording standby.)
x
b)
Press to stop playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
m/M
b)
Press to
– search tracks in the forward/
– search tracks in the forward/
backward direction of the CD
player, VCD player, DVD
player, LD player, MD deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
player, VCD player, DVD
player, LD player, MD deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
– fast forward/rewind of the
VCR, DAT deck, or tape
deck.
deck.
Name
Function
./>
b)
Press to skip tracks of the VCR,
CD player, VCD player, LD
player, DVD player, MD deck,
DAT deck, tape deck, Blu-ray
disc recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
CD player, VCD player, LD
player, DVD player, MD deck,
DAT deck, tape deck, Blu-ray
disc recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
TUNING +/– Press to scan a station.
N TV CH +
a)
/– Press TV (Z) and then press
TV/CH +/– to select preset TV
channels.
channels.
PRESET
+
+
a)
/–
Press to
– select preset stations.
– select preset channels of the
– select preset stations.
– select preset channels of the
TV, VCR, satellite tuner, Blu-
ray disc recorder, DVD player,
DVD/VHS COMBO or DVD/
HDD COMBO.
ray disc recorder, DVD player,
DVD/VHS COMBO or DVD/
HDD COMBO.
O F1, F2
Press F1 or F2 to select a
component to operate.
– DVD/HDD COMBO
component to operate.
– DVD/HDD COMBO
F1: HDD mode
F2: DVD mode
F2: DVD mode
– DVD/VHS COMBO
F1: DVD mode
F2: VHS mode
F2: VHS mode
TV/INPUT
Press TV (Z) and then press
TV/INPUT to select the input
signal (TV input or video input).
TV/INPUT to select the input
signal (TV input or video input).
WIDE
Press TV (Z) and then press
WIDE to select the wide picture
mode.
WIDE to select the wide picture
mode.
P DVD TOP
MENU
Press to display the menu or on-
screen guide of the DVD player
on the TV screen.
Then, use the V/v/B/b and
screen guide of the DVD player
on the TV screen.
Then, use the V/v/B/b and
to perform menu operations.
DVD MENU Press to display the menu of the
DVD player on the TV screen.
Then, use the V/v/B/b and
Then, use the V/v/B/b and
to perform menu operations.
Q TV VOL +/– Press TV (Z) and then press
TV VOL to adjust the TV
volume level.
volume level.
MASTER
VOL +/–
VOL +/–
Press to adjust the volume level
of all speakers at the same time.
of all speakers at the same time.
MUTING
Press to mute the sound.
To mute the sound of the TV,
press TV (Z) and then press
MUTING.
To mute the sound of the TV,
press TV (Z) and then press
MUTING.
7
STR-K7100
13
US
Getting Star
ted
a)
The number 5, PRESET +, TV CH + and H
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
b)
The button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the buttons, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
PORT adapter operation. For details on the
function of the buttons, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
• The AUX on the remote is not available for
receiver operation.
Name
Function
R DISC SKIP
Press to skip disc of the CD
player, VCD player, DVD
player or MD deck (multi-disc
changer only).
player, VCD player, DVD
player or MD deck (multi-disc
changer only).
S CATEGORY
+/–
Press to select the category for
XM Radio.
XM Radio.
REPLAY /
ADVANCE
ADVANCE
Press to replay the previous
scene or fast forward the
current scene of the DVD
player, Blu-ray disc recorder,
DVD/VHS COMBO or DVD/
HDD COMBO.
scene or fast forward the
current scene of the DVD
player, Blu-ray disc recorder,
DVD/VHS COMBO or DVD/
HDD COMBO.
T RETURN/
EXIT O
Press to
– return to the previous menu.
– exit the menu while the menu
– return to the previous menu.
– exit the menu while the menu
or on-screen guide of the
VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or satellite tuner is
displayed on the TV screen.
VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or satellite tuner is
displayed on the TV screen.
To return to the previous
menu of Sony TV, press TV
(Z) and then press
RETURN/EXIT O.
menu of Sony TV, press TV
(Z) and then press
RETURN/EXIT O.
U
,
V
/v/B/b
After pressing RECEIVER
(D), then press MENU (L)
for receiver operation, press
V/v/B/b to select the settings.
After pressing DVD TOP
MENU (P) or DVD MENU
(P), press V/v/B/b to select
the settings, and then press
(D), then press MENU (L)
for receiver operation, press
V/v/B/b to select the settings.
After pressing DVD TOP
MENU (P) or DVD MENU
(P), press V/v/B/b to select
the settings, and then press
to enter the selection.
Press
also, to enter the
selection of the receiver, VCR,
satellite tuner, CD player,
DVD player or Blu-ray disc
recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO.
satellite tuner, CD player,
DVD player or Blu-ray disc
recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO.
V GUIDE
Press to display the EPG
(Electronic Program Guide)
of the TV, DVD player,
Satellite tuner, Blu-ray disc
recorder, PSX or DVD/HDD
COMBO.
(Electronic Program Guide)
of the TV, DVD player,
Satellite tuner, Blu-ray disc
recorder, PSX or DVD/HDD
COMBO.
W -/--
Press to select the channel
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV
(Z) and then press -/--.
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV
(Z) and then press -/--.
Name
Function
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button of the DVD
player, Blu-ray disc recorder,
PSX, satellite tuner, DVD/
VHS COMBO or DVD/HDD
COMBO.
you press the incorrect
numeric button of the DVD
player, Blu-ray disc recorder,
PSX, satellite tuner, DVD/
VHS COMBO or DVD/HDD
COMBO.
>10
Press to select track numbers
over 10 of the CD player,
VCD player, LD player, MD
deck, tape deck, TV, VCR or
satellite tuner.
over 10 of the CD player,
VCD player, LD player, MD
deck, tape deck, TV, VCR or
satellite tuner.
X CATEGORY
MODE
Press to select the category
mode for XM Radio.
mode for XM Radio.
Y SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
Timer function and the
duration which the receiver
turns off automatically.
Z TV
Press to light up the button. It
changes the remote key
function to activate the
buttons with orange printing.
It also activate the DISPLAY
(J), OPTIONS TOOLS
(K), MENU (L),
RETURN/EXIT O (T),
changes the remote key
function to activate the
buttons with orange printing.
It also activate the DISPLAY
(J), OPTIONS TOOLS
(K), MENU (L),
RETURN/EXIT O (T),
(U) and V/v/B/b (U)
buttons to perform menu
operations for Sony TVs only.
operations for Sony TVs only.
wj
RM SET UP
Press to set up the remote.
8
STR-K7100
Note : This set can be disassemble according to the following sequence.
SECTION 2
DISASSEMBLY
2-1. CASE
Note : Follow the disassembly procedure in the numerical order given.
2-1.
CASE
(Page 8)
(Page 8)
2-3.
FRONT PANEL SECTION
(Page 9)
(Page 9)
SET
2-2.
BACK PANEL SECTION
(Page 9)
(Page 9)
2-6.
STANDBY BOARD
(Page 11)
(Page 11)
2-4.
DIGITAL BOARD
(Page 10)
(Page 10)
2-5.
MAIN BOARD SECTION
(Page 10)
(Page 10)
1
two screws
(case 3 TP2)
2
two screws
(case 3 TP2)
3
two screws
(+BVTP 3
×
8)
4
case
Click on the first or last page to see other HT-7100DH / STR-K7100 service manuals if exist.