DOWNLOAD Sony HCD-SHAKEX3 / HCD-SHAKEX7 Service Manual ↓ Size: 9.05 MB | Pages: 96 in PDF or view online for FREE

PLAYABLE  DISCS
• DVD+R/DVD+RW
• AUDIO 

CD

• CD-R/CD-RW/DVD-R/DVD-RW
 – 

audio 

data

 – 

MP3 

fi les that conforms to ISO9660 Level 1/Level 2, or 

Joliet (expansion format).

Notes
•  MP3 (MPEG 1 Audio Layer-3) is a standard format defi ned 

by ISO (International Organization for Standardization) which 
compresses audio data. MP3 fi les must be in MPEG 1 Audio 
Layer-3 format.

•  The system can only play back MP3 fi les that have a fi le 

extension of “.mp3”.

NOTE  OF  REPLACING  THE  IC1008  AND  IC1010  ON 
THE  4CH  DAMP  BOARD
IC1008 and IC1010 on the 4CH DAMP board cannot exchange 
with single. When these parts on the 4CH DAMP board are 
damaged, exchange the entire mounted board.

NOTE  OF  REPLACING  THE  IC002,  IC101,  IC105,  IC106,  
IC301,  IC302  AND IC303  ON  THE  MOTHERBOARD  
BOARD
IC002, IC101, IC105, IC106, IC301, IC302 and IC303 on the 
MOTHERBOARD board cannot exchange with single. When these 
parts on the MOTHERBOARD board are damaged, exchange the 
entire mounted board.

NOTE  OF  REPLACEMENT  OF  THE  MS-476  BOARD
When the MS-476 board is defective, exchange the entire 
LOADING COMPLETE ASSY (T).

[DISC TRAY LOCK MODE]
This mode let you lock the disc tray. When this mode is activated, 
the disc tray will not open when [Z] button is pressed. The message 
“LOCKED” will be displayed on the fl uorescent indicator tube. 
This mode only applied when there is disc(s) on the tray.

1. Press 

[

\/1

] button to turn on the system.

2.  Select DVD/CD function.
3.  Press [DJ OFF] button and [ISOLATOR] button simultaneously 

and hold down until “LOCKED” or “UNLOCKED” displayed 
on the fl uorescent indicator tube (around 5 seconds).

Note: When 

“

LOCKED

”

 is displayed, the slot lock is not released by 

turning power on/off with the

 [

\

/1

]

 button.

NOTE  OF  REPLACING  MOTHERBOARD  BOARD  OR  
BLUETOOTH  MODULE  OR  RC-S730 (WW)  BOARD
When the MOTHERBOARD board or BLUETOOTH module 
or RC-S730 (WW) board are replaced, please execute the below 
service mode.

1.  Press the [

\

/1

] button to turn the power on.

2. Place 

the 

Bluetooth device within 1 meter from the system.

3.  Press BLUETOOTH on the unit to select Bluetooth function. 

“BLUETOOTH” appears in the display panel.

4.  Hold down BLUETOOTH on the unit for 2 seconds or more.
 “PAIRING” 

fl ashes in the display panel.

5.  Perform the pairing procedure on the Bluetooth device.
6.  Select the model number of the unit on the display of the 

Bluetooth device.

 

 For example, select “SONY:SHAKE-X1D or SHAKE-X3D or 
SHAKE-X7D”.

 

If passkey is required on the Bluetooth device, enter “0000”.

7. Perform 

the 

Bluetooth connection on the Bluetooth device.

8.  When pairing is completed and the Bluetooth connection is 

established, Bluetooth device name appears in the display 
panel.

9.  To cancel pairing operation, hold down BLUETOOTH on the 

unit for 2 seconds or more until “BLUETOOTH” appears in 
the display panel.

Note: The operation in this mode must use a NFC-compatible smartphone 

(Smartphones with a built-in NFC function [OS: Android 2.3.3 or 
later, excluding Android 3.x])

1.  Press the [

\

/1

] button to turn the power on.

2.  Download and install the app “NFC Easy Connect”.
 

Download the free Android app from Google Play by searching 
for “NFC Easy Connect”.

3.  Start the app “NFC Easy Connect” on the smartphone.
 

Make sure that the application screen is displayed.

4.  Touch the smartphone to the N-Mark on the system until the 

smartphone vibrates.

  Complete the connection by following the instructions 

displayed on the smartphone.

5.  When pairing is completed and the Bluetooth connection is 

established, the Bluetooth device name appears in the display 
panel.

For a Bluetooth device
1.  Press the [

\

/1

] button to turn the power on.

2.  Press BLUETOOTH on the unit to select Bluetooth function.
 

“BLUETOOTH” appears in the display panel.

3.  Establish connection with the Bluetooth device.
 

Press BLUETOOTH on the unit to connect to the last 
connected Bluetooth device.

 Perform 

the 

Bluetooth connection from the Bluetooth device if 

the device is not connected.

 

Once the connection is established, the Bluetooth device name 
appears in the display panel.

4. Press 

N

.

 

Depending on the Bluetooth device,

 

– you may have to press N twice.

 

– you may need to start playback of an audio source on the
  Bluetooth device.

For an NFC-compatible smartphone
1.  Press the [

\

/1

] button to turn the power on.

 

Touch the smartphone to the N-Mark on the system to establish 
the Bluetooth connection.

  Start playback of an audio source on the smartphone. For 

details on playback, refer to the operating instructions of your 
smartphone.

To disconnect the Bluetooth device
For a Bluetooth device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display panel.

For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.

Note 1: After the side (L, R) panel assy, top panel and fan is removed, this work is done.
Note 2: Please prepare the thin wire (clip etc. processed to the length of 8 cm or more).

Switching Regulator Board (Conductor side view) (HCD-SHAKEX1/SHAKEX3)
In checking the Switching Regulator board, make 3 capacitors discharge of C18, C20 and C27 for eletrical shock prevention.

2  Insert the clip etc.

1 Remove the side (L,R) panel, top panel section,
 

Note: Push after it inserts it in this hole well.

3

:/5 W

:/5 W

:/5 W

Switching Regulator Board (Conductor side view) (HCD-SHAKEX7)
In checking the Switching Regulator board, make 4 capacitors discharge of C18, C20, C27 and C28 for eletrical shock prevention.

:/5 W

:/5 W

:/5 W

:/5 W