Sony HCD-RG55 / HCD-RG55S / MHC-RG55 / MHC-RG55S Service Manual ▷ View online
5
HCD-RG55/RG55S
SECTION 1
SERVICE NOTE
1
Cut the fifteen melted-connection points
with a cutting plier.
3
Cut the seven melted-connection points
with a cutting plier.
2
PANEL board
4
KEY board
PANEL board
(eleven screw holes)
(eleven screw holes)
KEY board
(six screw holes)
(six screw holes)
Screw hole
In order to re-install the panel board and the key board,
fix them by using the screws (+BVTP 2.6
fix them by using the screws (+BVTP 2.6
×
8 ) respectively.
Screw in to the respective screw holes.
Do not tighten the screws excessively.
Do not tighten the screws excessively.
* The panel board and the key board only are connected to the front panel
by means of hot-melting the plastics.
by means of hot-melting the plastics.
Note for installing the panel board and the key board
REMOVING THE PANEL BOARD AND THE KEY BOARD
Hot melt
6
HCD-RG55/RG55S
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
7
HCD-RG55/RG55S
8
HCD-RG55/RG55S
SECTION 3
DISASSEMBLY
Note : Disassemble the unit in the order as shown below.
3-1.
CASE (TOP)
(Page 9)
(Page 9)
3-2.
CD (DOOR)
(Page 9)
(Page 9)
3-9.
SENSOR BOARD
DC FAN (FAN961)
(Page 14)
DC FAN (FAN961)
(Page 14)
SET
3-11. CD BOARD
(Page 15)
3-12 BASE UNIT
(Page 16)
3-3.
FRONT PANEL SECTION
(AEP, UK MODEL)
(Page 10)
(AEP, UK MODEL)
(Page 10)
3-4.
FRONT PANEL SECTION
(EXCEPT AEP, UK MODEL)
(Page 11)
(EXCEPT AEP, UK MODEL)
(Page 11)
3-6.
PANEL BOARD
(AEP, UK MODEL)
(Page 12)
(AEP, UK MODEL)
(Page 12)
3-8.
KEY BOARD
(Page 13)
(Page 13)
3-5.
TAPE MECHANISM DECK
(Page 12)
(Page 12)
3-7.
PANEL BOARD
(EXCEPT AEP, UK MODEL)
(Page 13)
(EXCEPT AEP, UK MODEL)
(Page 13)
3-10. MAIN BOARD,
SUB WOOFER BOARD,
POWER BOARD
(Page 15)
POWER BOARD
(Page 15)
3-13. DRIVE BOARD,
MOTOR (TC) BOARD,
SENSOR (TC) BOARD
(Page 16)
SENSOR (TC) BOARD
(Page 16)
Click on the first or last page to see other HCD-RG55 / HCD-RG55S / MHC-RG55 / MHC-RG55S service manuals if exist.