Sony HCD-GTR888 Service Manual ▷ View online
33
<No sound>
1.
The speaker code may not be connected securely.
Make sure the speaker code is connected securely.
2. How to set the speaker setting is page 8 of the Instruction Manual.
There is no
audio output during
Recording Timer
.
<Noise>
1.
1.
Shut
the unit away
when TV or VCR is placed close.
2.
Connect with the outlet of a different place.
3.
Attach a commercial noise filter to a power cord.
Page
34
<CD Disc cannot be played>
1.
The lens may be dew condensation by the moisture. Remove the
disc and leave it power on for about 30 min.
<CD-R/CD-RW
cannot be played >
1.
The CD may be recorded in different format.
The Data CDs must be recorded in ISO 9660 Level 1/Level 2, or
Joliet.
<Unplayable
D
isc
>
1. CD-ROM
2. CD-R/CD-RW recorded in MP3 PRO format
3. Recorded in multisession that have not ended by "closing the session“
4. Recorded with an incompatible recording device .
5. Poor recording quality .
6. Scratches or dirty .
7. Finalized incorrectly .
8. Discs of non-standard shape (for example, heart, square, star) .
9. Discs that have adhesive tape, paper, or sticker attached to them .
10. Rental or used discs with attached seals where the glue extends
2. CD-R/CD-RW recorded in MP3 PRO format
3. Recorded in multisession that have not ended by "closing the session“
4. Recorded with an incompatible recording device .
5. Poor recording quality .
6. Scratches or dirty .
7. Finalized incorrectly .
8. Discs of non-standard shape (for example, heart, square, star) .
9. Discs that have adhesive tape, paper, or sticker attached to them .
10. Rental or used discs with attached seals where the glue extends
beyond the seal .
11. Discs that have labels printed using ink that feels tacky when touched.
Page
35
<
The data of USB device cannot play back
>
1. The
USB formatted with FAT16 and FAT32 are supported.
Not supported except them.
2. The USB
device may not be connected correctly.
Turn the power off and connect
the USB device again ,and then turn
the power on. Also
check whether
「
USB A」or 「USB B」
is
flashed
up
on display panel.
<
The data cannot transfer to USB device
>
1. The USB
device may not be formatted correctly.
Refer the operation manual of USB device about
how to format.
Page
36
Page
Click on the first or last page to see other HCD-GTR888 service manuals if exist.