Sony HCD-GPX33 / HCD-GPX55 / HCD-GPX77 / HCD-GPX88 Service Manual ▷ View online
HCD-GPX33/GPX55/GPX77/GPX88
5
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
Note 1: After the side panel (L, R) and top panel is removed, this work is done.
Note 2: Please prepare the thin wire (clip etc. processed to the length of 8 cm or more).
Note 2: Please prepare the thin wire (clip etc. processed to the length of 8 cm or more).
1 Remove the panel, side-L.
(Illustration of disassembly is omitted.)
3
tray
2 Insert the clip etc.
tray
BD drive
Insert the clip etc.
processed to the
length of 8 cm or
more in the hole
on the side of the
chassis and push.
processed to the
length of 8 cm or
more in the hole
on the side of the
chassis and push.
8 cm or more
hole
–
Side view
–
–
Top view
–
Note: Push after it inserts it in this hole well.
PRECAUTION WHEN INSTALLING A NEW OP UNIT/PRECAUTION BEFORE UNSOLDERING THE STATIC
ELECTRICITY PREVENTION SOLDER BRIDGE
ELECTRICITY PREVENTION SOLDER BRIDGE
When installing a new OP unit, be sure to connect the fl exible printed circuit board fi rst of all before removing the static electricity preven-
tion solder bridge by unsoldering.
Remove the static electricity prevention solder bridge by unsoldering after the fl exible printed circuit board has already been connected.
(Do not remove nor unsolder the solder bridge as long as the OP unit is kept standalone.)
tion solder bridge by unsoldering.
Remove the static electricity prevention solder bridge by unsoldering after the fl exible printed circuit board has already been connected.
(Do not remove nor unsolder the solder bridge as long as the OP unit is kept standalone.)
Ver. 1.2
HCD-GPX33/GPX55/GPX77/GPX88
6
CAPACITOR DISCHARGE FOR ELECTRIC SHOCK PREVENTION
C1021
C1185
C1020
C1183
N:
N:
N:
N:
in checking the MB board, make a capacitor
discharge of C1183 or C1020 or C1185 and C1021
for electrical shock prevention.
discharge of C1183 or C1020 or C1185 and C1021
for electrical shock prevention.
MB board
5(*8/$7256:,7&+,1*
board
board
LQFKHFNLQJWKH5(*8/$7256:,7&+,1*ERDUGPDNH
a capacitor discharge of C531 for electrical shock prevention.
a capacitor discharge of C531 for electrical shock prevention.
C531
N:
Ver. 1.2
HCD-GPX33/GPX55/GPX77/GPX88
7
NOTE OF REPLACING MB BOARD OR BLUETOOTH
MODULE OR RC-S801/A (WW) BOARD
When the MB board or BLUETOOTH module or RC-S801/A
(WW) board are replaced, please execute the below service mode.
MODULE OR RC-S801/A (WW) BOARD
When the MB board or BLUETOOTH module or RC-S801/A
(WW) board are replaced, please execute the below service mode.
Pairing this system with a
Bluetooth device
1. Press the [
\
/1
] button to turn the power on.
2. Place the Bluetooth device within 1 meter (3 feet) from the
system.
3. Press BLUETOOTH on the unit to select Bluetooth function.
“BLUETOOTH” appears in the display panel.
4. Hold down BLUETOOTH on the unit for 2 seconds or more.
“PAIRING”
“PAIRING”
fl ashes in the display panel.
5. Perform the pairing procedure on the Bluetooth device.
6. Select the model number of the unit on the display of the
6. Select the model number of the unit on the display of the
Bluetooth device.
For example, select “SONY MHC-GPX88” (or LBT-GPX77/
GPX55/MHC-GPX77/GPX55/ GPX33).
GPX55/MHC-GPX77/GPX55/ GPX33).
If passkey is required on the Bluetooth device, enter “0000”.
7. Perform
the
Bluetooth connection on the Bluetooth device.
8. When pairing is completed and the Bluetooth connection is
established, Bluetooth device name appears in the display
panel.
panel.
Depending on the Bluetooth device, connection may start
automatically after pairing is completed.
automatically after pairing is completed.
You can check the Bluetooth device address by pressing
DISPLAY repeatedly.
DISPLAY repeatedly.
9. To cancel pairing operation, hold down BLUETOOTH on the
unit for 2 seconds or more until “BLUETOOTH” appears in
the display panel.
the display panel.
Connecting with a smartphone by one touch (NFC)
Note: The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
later, excluding Android 3.x])
1. Press the [
\
/1
] button to turn the power on.
2. Download and install the app “NFC Easy Connect”.
Download the free Android app from Google Play by searching
for “NFC Easy Connect”.
for “NFC Easy Connect”.
3. Start the app “NFC Easy Connect” on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name appears in the display
panel.
panel.
Playing music from a
Bluetooth device
For a Bluetooth device
1. Press the [
1. Press the [
\
/1
] button to turn the power on.
2. Press BLUETOOTH on the unit to select Bluetooth function.
“BLUETOOTH” appears in the display panel.
3. Establish connection with the Bluetooth device.
The last connected Bluetooth device will be connected
automatically.
automatically.
Perform
the
Bluetooth connection from the Bluetooth device if
the device is not connected.
Once the connection is established, the Bluetooth device name
appears in the display panel.
appears in the display panel.
4. Press
N
.
Depending on the Bluetooth device,
– you may have to press N twice.
– you may need to start playback of an audio source on the
Bluetooth device.
Bluetooth device.
For an NFC-compatible smartphone
1. Press the [
1. Press the [
\
/1
] button to turn the power on.
Touch the smartphone to the N-Mark on the system to establish
the Bluetooth connection.
the Bluetooth connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
smartphone.
To disconnect the Bluetooth device
For a Bluetooth device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display panel.
For a Bluetooth device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display panel.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
COLD RESET test mode (Refer page 14).
COLD RESET test mode (Refer page 14).
HCD-GPX33/GPX55/GPX77/GPX88
8
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
2-2. SIDE-L PANEL, SIDE-R PANEL,
TOP
TOP
PANEL
(Page
9)
2-5. CD MECHANISM SECTION
(CDM90-DVBU202//M)
(Page
(CDM90-DVBU202//M)
(Page
10)
2-7. CHASSIS
SECTION
(Page
11)
2-8. SERVICE OPTICAL DEVICE,
WIRE (FLAT TYPE)
(Page
12)
2-6. MB
BOARD
(Page
11)
2-4. FRONT PANEL SECTION
(Page
(Page
10)
SET
2-3. LOADING
PANEL
(Page
9)
Click on the first or last page to see other HCD-GPX33 / HCD-GPX55 / HCD-GPX77 / HCD-GPX88 service manuals if exist.