DOWNLOAD Sony HCD-GNZ77D / HCD-GNZ88D / MHC-GNZ77D / MHC-GNZ88D Service Manual ↓ Size: 10.98 MB | Pages: 116 in PDF or view online for FREE

21

• TEST DISC LIST

Be sure to use the DVD disc that matches the signal standards of
your region.
• CD

YEDS-18 (Part No.: 3-702-101-01)
PATD-012 (Part No.: 4-225-203-01)

• DVD SL (Single Layer)

NTSC : HLX-503 (Part No.: J-6090-069-A)

HLX-504 (Part No.: J-6090-088-A)

PAL

: HLX-506 (Part No.: J-6090-077-A)

• DVD DL (Dual Layer)

NTSC : HLX-501 (Part No.: J-6090-071-A)

HLX-505 (Part No.: J-6090-089-A)

PAL

: HLX-507 (Part No.: J-6090-078-A)

• Procedure to enter to DVD Service Mode:

1. Press  

?

/

1

  button to turn on the system.

2. Select DVD function.
3. Press  

x

  button and [OPEN/CLOSE] button simultaneously and

then turn the [VOLUME] knob clockwise.

4. The message “SERVICE IN” appears on the fluorescent

indicator tube and the Top Menu of Remocon Diagnosis Menu
appears on the on-screen display on the TV. The model name
and revision number is displayed at the bottom of the on-screen
display.

3. Select “6. Iop:” by pressing [6] button on the remote commander.
4. Wait until a hexadecimal number appears in the on-screen

display as below:

Remocon Diagnosis Menu

0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History
4. Version Information

Model Name : GML6DS_ME
IF-con

: V

Syscon

: Ver.

er.  01.00 (0000)

0.302

5. To execute each function, press its number by using numeric

button on the remote commander.

6. To release from this mode, press  

?

/

1

    button to turn off the

system.

• Execute IOP Measurement

In order to execute IOP measurement, the following standard
procedures must be followed.

1. From the Top Menu of Remocon Diagnosis Menu, select “2.

Drive Manual Operation” by pressing the [2]  button on the
remote commander. The following screen appears on the on-
screen display.

Drive Manual Operation

1. Servo Control
2. Track/Layer Jump
3. Manual Adjustment
4. Mecha test Mode
5. MIRR time Adjust
0. Return to Top Menu

2. Select “3. Manual Adjustment” by pressing the [3] button on

the remote commander. The following screen appears on the
on-screen display.

Manual Adjust

1.  Track Balance Adjust:
2.  Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eg Boost Adjust:
6. Iop:
7.  TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:

O

  o    Change Value

RETURN Return to previous menu

Manual Adjust

1.  Track Balance Adjust:
2.  Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eg Boost Adjust:
6. Iop. ED:
7.  TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:

O

  o    Change Value

RETURN Return to previous menu

5. Convert data from hexadecimal to decimal by using conversion

table.

6. Please find the label on the rear of the BU (Base Unit).

The default IOP value is written in the label.

7. Subtract between these two values.
8. If the remainder is smaller than 93 (decimal), then it is OK.

However if the value is higher than 93, then the BU is defective
and need to be change.

9. Press [RETURN] button on the remote commander to return to

previous menu.

10. Press [0] button on the remote commander to return to the Top

Menu of Remocon Diagnosis Menu.

11. Press  

?

/

1

  button to turn off the system.

• Check Emergency History

To  check the emergency history, please follow the following
procedure.

1. From the Top Menu of Remocon Diagnosis Menu, select “3.

Emergency History” by pressing the [3] button on the remote
commander. The following screen appears on the on-screen
display.

22

2. You can check the total time when the laser is turned on during

playback of DVD and CD from the above menu. The maximum
time, which can be displayed are 999h 59min.

3. You can check the error code of latest 10 emergency history

from the above menu. To view the previous or next page of
emergency history, press  

.

    or   

>

    on the remote

commander. The error code consists of

• Error Code

Example of Error code

1.  01  05  04  04

00  92  46  00

00  00  00  00

00  00  23  45

The meaning of error code is as below:

01: Communication error (No reply from syscon)
02: Syscon hung up
03: Power OFF request when syscon hung up
19: Thermal shutdown
24: MoveSledHome error
25: Mechanical move error (5 Changer)
26: Mechanical move stack error
30: DC motor adjustment error
31: DPD offset adjustment error
32: TE balance adjustment error
33: TE sensor adjustment error
34: TE loop gain adjustment error
35: FE loop gain adjustment error
36: Bad jitter after adjustment
40: Focus NG
42: Focus layer jump NG
52: Open kick spindle error
51: Spindle stop error
60: Focus on error
61: Seek fail error
62: Read Q data/ID error
70: Lead in data read fail
71: TOC read time out (CD)
80: Can’t buffering
81: Unknown media type

• Parameter of error code

This is the detail of error code.

Example of Error code

1.  01  05  04  04

00  92  46  00

00  00  00  00

00  00  23  45

• Time of error code

This is the laser time when an error occurred.

Example of Error code

1.  01  05  04  04

00  92  46  00

00  00  00  00

00  00  23  45

Press [DISPLAY] button and then press [CLEAR] button. The data
for both CD and DVD data are reset.

Emg.History Check

1.  01  05  04  04

Laser Hours

CD

0h

0min

DVD

0h

0min

00  92  46  00

00  00  00  00

00  00  23  45

2.  02  02  01  01

00  A9  4B  00

00  00  00  00

00  00  23  45

 

Next   Next Page    Prev  Prev Page

O  Return to Top Menu

Press [TOP MENU] button and then press [CLEAR] button. The error
code for all emergency history would be reset.

Emg.History Check

1.  00  00  00  00

Laser Hours

CD

999h

59min

DVD

999h

59min

00  00  00  00

00  00  00  00

00  00  00  00

2.  00  00  00  00

00  00  00  00

00  00  00  00

00  00  00  00

 

Next   Next Page    Prev  Prev Page

O  Return to Top Menu

Emg.History Check

1.  01  05  04  04

Laser Hours

CD

999h

59min

DVD

999h

59min

00  92  46  00

00  00  00  00

00  00  23  45

2.  02  02  01  01

00  A9  4B  00

00  00  00  00

00  00  23  45

 

Next   Next Page    Prev  Prev Page

O  Return to Top Menu

Press [MENU] button and then press [CLEAR] button on the remote
commander.

Emg.History Check

Initialize setup data...

Laser Hours

CD

999h

59min

DVD

999h

59min

 

Next   Next Page    Prev  Prev Page

O  Return to Top Menu

23

Press [0] button on the remote commander.

• Check Version Information

To check the version information, please follow the following
procedure.

1. From the Top Menu of Remocon Diagnosis Menu, select “4.

Version Information” by pressing the [4] button on the remote
commander. The following screen appears on the on-screen
display.

To return to the Top Menu of Remocon Diagnosis Menu, press
[0] on the remote commander.

Version information

 

O  Return to Top Menu

Firm (Main) :  Ver. xxxxx
Firm (Sub) :  xxxxx
RISC :   xxxxx
8032 :   xxxxx
Audio DSP :  xxxxx
Servo DSP :  xxxxx

1. Clean the following parts with a denatured alcohol-moistened

swab:

record/playback heads

pinch rollers

erase head

rubber belts

capstan

idlers

2. Demagnetize the record/playback head with a head

demagnetizer.

3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the

parts adjusted.

5. The adjustments should be performed with the rated power

supply voltage unless otherwise noted.

3.06 N • m to 6.96 N • m

31 to 71 g • cm

(0.43 – 0.98 oz • inch)

0.19 N • m to 0.58 N • m

2 to 6 g • cm

(0.02 – 0.08 oz • inch)

3.06 N • m to 6.96 N • m

31 to 71 g • cm

(0.43 – 0.98 oz • inch)

0.19 N • m to 0.58 N • m

2 to 6 g • cm

(0.02 – 0.08 oz • inch)

6.96 N • m to 14.02 N • m

71 to 143 g • cm

(0.98 – 1.99 oz • inch)

9.80 N • m

100 g or more

(3.53 oz or more)

9.80 N • m

100 g or more

(3.53 oz or more)

CQ-102C

CQ-102C

CQ-102RC

CQ-102RC

CQ-201B

CQ-403A

CQ-403R

FWD

FWD
back tension

REV

REV
back tension

FF/REW

FWD tension

REV tension

24

Purpose
This adjustment is made to satisfy the NTSC standard, and if not
adjusted correctly, the brightness will be too large or small.

Procedure:
1. Connect oscilloscope to VIDEO output.
2. Load a DVD reference disc playback.
3. Check the video signal level is 1.00±0.07Vp-p.

When the optical pick-up assy is replaced, perform the “Execute
IOP Measurement”.

Execute IOP Measurement (See page 21)

Be sure to use the DVD disc that matches the signal standards of
your region.
• CD

YEDS-18 (Part No.: 3-702-101-01)
PATD-012 (Part No.: 4-225-203-01)

• DVD SL (Single Layer)
    NTSC : HLX-503 (Part No.: J-6090-069-A)

HLX-504 (Part No.: J-6090-088-A)

    PAL

: HLX-506 (Part No.: J-6090-077-A)

• DVD DL (Dual Layer)
    NTSC : HLX-501 (Part No.: J-6090-071-A)

HLX-505 (Part No.: J-6090-089-A)

    PAL

: HLX-507 (Part No.: J-6090-078-A)

1. Connect an oscilloscope to CN105 pin 6  (RFMON) and

CN105 pin 3 (GND) on the DMB15 board.

2. Turn the power on.
3. Set the test disc (refer to the TEST DISC LIST) on the tray

and press  H  button to playback.

4. Confirm that oscilloscope waveform is clear and check

RFMON signal level is correct or not.

A clear RFMON signal waveform means that the shape “

◊” can be

clearly distinguished at the center of the waveform.

Checking Location: DMB15 board (Side A)

+
–

CN105 pin 

6

 (RFMON)

CN105 pin 

3

 (GND)

oscilloscope 

DMB15 board

VOLT/DIV: 200 mV

TIME/DIV: 500 ns

RFMON signal waveform

level: 0.58 

±

 1.23 Vp-p (DVD)

          0.57 

±

 1.1 Vp-p (CD)

IC102

IC101

IC104

IC201

CN105

CN106

CN105 pin 

3

 (GND)

CN105 pin 

6

 (RFMON)

1

6

DMB15 BOARD (SIDE A)

oscilloscope

set

J1902
VIDEO OUTPUT

75 

Ω

1.00 

±

 0.07 Vp-p

(WHITE 100%)