Sony HCD-EC709IP / HCD-EC909IP Service Manual ▷ View online
HCD-EC709iP/EC909iP
5
Ver. 1.1
NOTE OF REPLACING THE IC604 OR IC606 ON THE
MAIN BOARD (HCD-EC909iP only)
The IC604 and IC606 on the MAIN board of HCD-EC909iP have
been changed from the midway of production.
Therefor, the IC604 and IC606 of Former type are limited to the
stock quantity of service parts.
When the IC604 and IC606 of Former type cannot be obtained,
exchange the complete MAIN board.
However, the Former type/New type exist in the complete MAIN
board due to changes of the IC604 and IC606.
Do the work with reference to the right fl owchart.
MAIN BOARD (HCD-EC909iP only)
The IC604 and IC606 on the MAIN board of HCD-EC909iP have
been changed from the midway of production.
Therefor, the IC604 and IC606 of Former type are limited to the
stock quantity of service parts.
When the IC604 and IC606 of Former type cannot be obtained,
exchange the complete MAIN board.
However, the Former type/New type exist in the complete MAIN
board due to changes of the IC604 and IC606.
Do the work with reference to the right fl owchart.
• Serial Number List (HCD-EC909iP)
Serial Number
Destination
Former type
New type
US model
8480224 or smaller
8480225 or larger
Canadian model
4112926 or smaller
4112927 or larger
Australian model
3111594 or smaller
3111595 or larger
• Flowchart
Repair start
Repair comfirmation
of IC604 or IC606
IC604 or IC606
exchange
Complete MAIN
board exchange
Operation check
Confirmation
of serial number (refer
to Serial Number
List)
Part
procurement of
IC604 or IC606
(Former type)
Part
procurement of
complete MAIN board
(Former type)
NG
Refer to
SUPPLEMENT-1
New
type
type
OK
OK
NG
Refer to this
SERVEICE MANUAL
Former
type
type
Repair completion
Complete MAIN
board (New type)
exchange
HCD-EC709iP/EC909iP
6
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
2-2. SIDE PANEL (L)/(R)
SET
2-5. TOP PANEL BLOCK
(Page
(Page
8)
2-6. BACK PANEL BLOCK
(Page
(Page
9)
2-8. FRONT PANEL BLOCK
(Page
(Page
10)
2-10. BASE UNIT (BU-D1BD73)
(Page
(Page
11)
2-11. OPTICAL PICK-UP BLOCK
(DA11MMVGP)
(Page
(DA11MMVGP)
(Page
11)
2-7. MAIN
BOARD
(Page
9)
2-2. SIDE PANEL (L)/(R)
(Page
(Page
6)
2-3. ORNAMENT PLATE (DOCK) OR iPod ASSY
(Page
(Page
7)
2-4. IP BOARD BLOCK, BASE (DOCK) BLOCK
(Page
(Page
8)
2-9. KNOB
(VOL)
(Page
10)
4
4
2 two screws
(BVTP3
u 10)
1 four screws
(case
3)
1 four screws
(case
3)
5 side panel (L)
5 side panel (R)
3 two claws
3 claw
3 two claws
3 two claws
2 two screws
(BVTP3
u 10)
HCD-EC709iP/EC909iP
7
2-3. ORNAMENT PLATE (DOCK) OR iPod ASSY
1 Open the iPod dock.
4 Confirm four claws has come off
after shutting the iPod dock.
3 claw
3 claw
6 three claws
7 ornament plate (dock) or iPod assy
5 Turn up a ornament plate (dock) or
iPod assy low part and remove it without
using by the flat-head screwdriver.
2 Push in flat-head screwdriver.
Note
1: Avoid a claw and put a
flat-head screwdriver in.
2 Push in flat-head screwdriver.
Note
1: Avoid a claw and put a
flat-head screwdriver in.
Note 2: Push the gap by the flat-head screwdriver
when not coming off.
– Bottom view –
– Bottom view –
HCD-EC709iP/EC909iP
8
1 four screws (B2.6)
6 IP board block
3
7
9
5 Remove two solders.
4 flexible flat cable
(13 core) (CN901)
8 boss
0 boss
2 sheet
2 sheet
2 sheet
sheet
sheet
sheet
Never put the sheet to the claw.
qa base (dock) block
red
black
$UUDQJHPHQWRIOHDGZLUH
–)URQWSDQHOEORFNLQVLGHYLHZ–
Note 2: The hole of the front panel that passes the flexible flat
cable (13 core) and the wire from the IP board block
is
different.
Please pass it through a correct hole respectively.
There is a possibility that trouble occurs when iPod
dock is opened or closed when it makes a mistake in
the passed hole.
2-5. TOP PANEL BLOCK
2-4. IP BOARD BLOCK, BASE (DOCK) BLOCK
Note 1: This illustration sees the front panel from bottom side.
2 connector
(S351)
7 top panel block
4 two screws
(BVTP3
u 10)
3 screw
(KTP3
u 10)
3 screw
(KTP3
u 10)
1 flexible flat cable (15 core)
(CN401)
6 two claws
5
Click on the first or last page to see other HCD-EC709IP / HCD-EC909IP service manuals if exist.