Sony HCD-EC709IP / HCD-EC909IP Service Manual ▷ View online
HCD-EC709iP/EC909iP
33
Pin No.
Pin Name
I/O
Description
63, 64
SEG0, SEG1
O
Segment drive signal output to the liquid crystal display
65
VCC
-
Power supply terminal (+3.3V)
66
VSS
-
Ground terminal
67 to 89
SEG2 to SEG24
O
Segment drive signal output to the liquid crystal display
90
VCC
-
Power supply terminal (+3.3V)
91
VSS
-
Ground terminal
92
X1
I
Main system clock output terminal (6 MHz)
93
X0
O
Main system clock input terminal (6 MHz)
94 to 100
SEG25 to SEG31
O
Segment drive signal output to the liquid crystal display
34
HCD-EC709iP/EC909iP
SECTION 6
EXPLODED VIEWS
1
3-363-099-32 SCREW (CASE 3 TP2)
2
2-890-830-21 PANEL (R), SIDE (US)
2
2-890-830-31 PANEL (R), SIDE (CND, AUS)
3
2-890-831-01 PANEL (L), SIDE (US)
3
2-890-831-11 PANEL (L), SIDE (CND, AUS)
4
4-237-065-01 CLAMP
(L35)
5
4-187-395-01 SHEET
#1
7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-3
#2
7-685-247-14 SCREW +KTP 3X10 TYPE2 NON-SLIT
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
• Abbreviation
AUS :
AUS :
Australian
model
CND : Canadian model
6-1. OVERALL SECTION
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
1
#2
#2
#1
#1
#1
#1
#1
front panel section
MAIN board section
top panel section
1
2
3
4
5
35
HCD-EC709iP/EC909iP
6-2. TOP PANEL SECTION
51
A-1748-697-A BD73 BOARD, COMPLETE
52
1-834-268-21 WIRE (FLAT TYPE) (16 CORE)
53
4-985-672-01 SCREW (+PTPWHM2.6), FLOATING
54
3-931-379-31 RUBBER, VIBRATION PROOF
55
3-931-379-21 RUBBER, VIBRATION PROOF
0 56
A-1780-028-A OPTICAL PICK-UP BLOCK (DA11MMVGP)
(Including sled motor, spindle motor)
57
4-166-010-01 COVER
(D1)
58
4-136-037-02 PANEL, TOP (1) (US)
58
4-136-037-12 PANEL, TOP (1) (CND, AUS)
59
3-087-053-01 +BVTP2.6
(3CR)
60
3-047-468-11 DAMPER
61
4-145-341-01 SPRING
(LID)
62
4-161-552-01 PULLEY,
CHUCKING
63
1-452-899-31 MAGNET
64
3-253-143-01 SCREW (B2.6), (+) P TAPPING
65
4-120-740-02 LID
(CD)
66
3-080-204-31 SCREW,
TAPPING,
P2
S001
1-771-853-11 SWITCH, DETECTION (LIMIT)
S351
1-692-960-11 SWITCH, PUSH (1 KEY)
(CD LID OPEN/CLOSE DETECT)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
not supplied
56
(including sled motor, spindle motor)
51
52
53
54
53
53
S001
S351
not supplied
(sled motor)
(sled motor)
not supplied
(spindle motor)
(spindle motor)
not supplied
55
55
57
58
54
59
60
61
62
63
64
65
(EC709iP)
not supplied
66
36
HCD-EC709iP/EC909iP
6-3. FRONT PANEL SECTION
101
3-876-249-01 LATCH
102
4-127-708-01 SHEET
103
4-225-252-01 CUSHION
(FOOT)
104
4-169-806-01 KNOB
(VOL)
105
4-120-658-31 RING
(VOL)
106
4-120-657-11 RING,
ORNAMENT
107
A-1749-938-A PANEL ASSY, FRONT (EC909iP: US)
107
A-1749-939-A PANEL ASSY, FRONT (EC909iP: CND, AUS)
107
A-1749-940-A PANEL ASSY, FRONT (EC709iP: US)
107
A-1749-941-A PANEL ASSY, FRONT (EC709iP: CND, AUS)
108
4-120-650-61 WINDOW (EC909iP: US, CND)
108
4-120-650-71 WINDOW (EC709iP: US, CND)
108
4-120-650-81 WINDOW
(EC909iP:
AUS)
108
4-120-650-91 WINDOW
(EC709iP:
AUS)
109
1-838-092-21 CABLE, FLEXIBLE FLAT (5 CORE)
110
3-087-053-01 +BVTP2.6
(3CR)
111
4-159-924-01 SHEET
(RM)
113
1-838-097-21 CABLE, FLEXIBLE FLAT (25 CORE)
114
1-838-088-21 CABLE, FLEXIBLE FLAT (15 CORE)
115
A-1749-021-A PANEL BOARD, COMPLETE (EC909iP: US, CND)
115
A-1749-022-A PANEL BOARD, COMPLETE (EC909iP: AUS)
115
A-1749-023-A PANEL BOARD, COMPLETE (EC709iP: US, CND)
115
A-1749-024-A PANEL BOARD, COMPLETE (EC709iP: AUS)
116
3-047-468-62 DAMPER
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
not supplied
not supplied
(JACK board)
(JACK board)
not supplied
(JACK HOLD board)
(JACK HOLD board)
iPod dock section
not supplied
(COVER board)
(COVER board)
101
102
103
104
105
106
107
108
109
110
109
110
113
114
115
116
110
110
110
110
110
111
Note: The hole of the front panel that passes the fl exible fl at cable (13
core) and the wire from the IP board block is different.
Please pass it through a correct hole respectively.
There is a possibility that trouble occurs when iPod dock is
opened or closed when it makes a mistake in the passed hole.
opened or closed when it makes a mistake in the passed hole.
Refer to disassembly “2-4. IP BOARD BLOCK, BASE (DOCK)
BLOCK” (page 8).
BLOCK” (page 8).
Click on the first or last page to see other HCD-EC709IP / HCD-EC909IP service manuals if exist.