Sony HCD-CP1 / HCD-CP1K Service Manual ▷ View online
– 44 –
Pin No.
Pin Name
I/O
Description
30
RDS-ON
O
Power supply on/off control signal output of the tuner pack (+7.5V) and RDS decoder (IC804)
(RDS decoder: used for the AEP and UK models only)
LED drive signal output of the TUNER indicator (D855) “H”: tuner power on (LED on)
(RDS decoder: used for the AEP and UK models only)
LED drive signal output of the TUNER indicator (D855) “H”: tuner power on (LED on)
31
HP-CHK
I
Headphone check detection signal input terminal
32
TC-SW
I
Half detect (side A and B) switch and cassette in detect switch input terminal (A/D input)
33
TRAY-SW
I
Disc tray position detect switch (S901, 902) input terminal (A/D input)
“L”: close position, “M”: open position, “H”: moving
“L”: close position, “M”: open position, “H”: moving
34
KEY3
I
Key input terminal (A/D input) S817 to S822, S824 and S825 (STANDBY I/
u, CD, TUNER,
TAPE, MD/VIDEO, DSG, TUNER BAND, CD SYNC keys input)
35
KEY2
I
Key input terminal (A/D input) S801 to S808 (TUNING MODE, CD
^/p/+/=, PLAY
MODE, REPEAT, CD EJECT
6 keys input)
36
KEY1
I
Key input terminal (A/D input)
S809 to S816 (TAPE
S809 to S816 (TAPE
9 (/p/)/0/P, REC r, TUNING +/– keys input)
37
SIMUKE
I
Destination setting terminal (A/D input)
38
RESET
I
System reset signal input from the reset signal generator (IC803) “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
39
EXTAL1
I
Main system clock input terminal (4.19 MHz)
40
XTAL1
O
Main system clock output terminal (4.19 MHz)
41
VSS
—
Ground terminal
42
XTAL2
O
Sub system clock output terminal (500 kHz) Not used (open)
43
EXTAL2
I
Sub system clock input terminal (500 kHz) Not used (fixed at “L”)
44
AVREF
I
Reference voltage (+5V) input terminal (for A/D conversion)
45
AVSS
—
Ground terminal (for A/D conversion)
46
VL
O
Liquid crystal display bias on/off control signal output terminal
47 to 49
VLC3 to VLC1
—
Power supply terminal for the liquid crystal display bias
50 to 53
COM0 to COM3
O
Common drive signal output to the liquid crystal display (LCD801)
54 to 85
SEG0 to SEG31
O
Segment drive signal output to the liquid crystal display (LCD801)
86
REC-BIAS
O
Recording bias on/off selection signal output to the HA12203NT (IC352)
“L”: bias on, “H”: bias off
“L”: bias on, “H”: bias off
87
REC-MUTE
O
Recording muting on/off selection signal output to the HA12203NT (IC352)
“L”: muting on, “H”: muting off
“L”: muting on, “H”: muting off
88
DOLBY
O
Dolby NR on/off selection signal output to the HA12203NT (IC352)
“L”: dolby on, “H”: dolby off
“L”: dolby on, “H”: dolby off
89
VDD
—
Power supply terminal (+5V)
90
NC
—
Connected to power supply (+5V)
91
VSS
—
Ground terminal
92
TX
O
Sub system clock output terminal (32.768 kHz)
93
TEX
I
Sub system clock input terminal (32.768 kHz)
94
CD-ON
O
Power supply on/off control signal output of the CD block (+5V)
LED drive signal output of the CD indicator (D852) “H”: CD power on (LED on)
LED drive signal output of the CD indicator (D852) “H”: CD power on (LED on)
95
REC/PB
O
Recording/playback selection signal output to the BA3126N (IC350) and HA12203NT (IC352)
“L”: playback mode, “H”: recording mode
“L”: playback mode, “H”: recording mode
96
L-MUTE
O
Line muting on/off selection signal output to the HA12203NT (IC352)
“L”: muting on, “H”: muting off
“L”: muting on, “H”: muting off
97
LINE OUT-MUTE
O
Muting on/off control signal output terminal “H”: muting on
98
TC-ON
O
Power supply on/off control signal output of the cassette holder back light
LED drive signal output of the TAPE indicator (D854) “H”: back light on (LED on)
LED drive signal output of the TAPE indicator (D854) “H”: back light on (LED on)
99
WP
I
Wakeup control signal input terminal
100
CD-SCOR
I
Subcode sync (S0+S1) detection signal input from DSP on the CD block (at CD function)
– 45 –
(1)
COVER, TAPE MECHANISM DECK SECTION
SECTION 7
EXPLODED VIEWS
Les composants identifiés par une
marque
marque
! sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Ne les remplacer que par une pièce
portant le numéro spécifié.
The components identified by
mark
mark
! or dotted line with mark
! are critical for safety.
Replace only with part number
specified.
specified.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
delay should be anticipated when ordering
these items.
• The mechanical parts with no reference num-
ber in the exploded views are not supplied.
• Hardware (# mark) list is given in the last of
the electrical parts list.
NOTE:
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color Cabinet's Color
• Abbreviation
CND : Canadian model
HK : Hong Kong model
MY : Malaysia model
SP
HK : Hong Kong model
MY : Malaysia model
SP
: Singapore model
TH
: Thai model
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
1
1-772-001-11 ELECTRIC, MECHANICAL (TAPE DECK BLOCK)
2
X-4949-568-1 ROLLER PINCH BLK R ASSY
3
X-4949-569-1 ROLLER PINCH BLK L ASSY
4
4-997-984-01 BELT, F/R
5
4-997-983-01 BELT, MAIN
6
3-363-099-51 SCREW (CASE 3 TP2)
* 7
4-217-341-01 COVER (UPPER)
#1
#1
#1
Front panel
secrtion
secrtion
#2
#2
not
supplied
supplied
not
supplied
supplied
not
supplied
supplied
#1
1
2
3
5
6
7
#1
Chassis section
6
4
– 46 –
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
(2)
FRONT PANEL SECTION
51
X-4951-108-1 KNOB ASSY
52
X-4951-102-1 PANEL SUB ASSY, FRONT (AEP, UK)
52
X-4951-702-1 PANEL SUB ASSY, FRONT (EXCEPT AEP, UK)
53
4-217-318-01 WINDOW (CASSETTE)
54
4-217-356-01 SHEET, WINDOW ADHESIVE
55
4-217-316-01 LID, CASSETTE
* 56
1-673-633-11 LCD BOARD
57
4-217-319-01 PLATE, LCD LIGHT
58
4-217-317-01 HOLDER (CASSETTE)
59
4-217-345-01 SPRING (CASSETTE)
60
1-790-628-11 WIRE (FLAT TYPE)
61
1-790-629-11 WIRE (FLAT TYPE)
* 62
4-217-320-01 PLATE, BACK LIGHT
(CASSETTE HOLDER BACK LIGHT)
63
X-4951-107-1 LOCK (EJECT) ASSY
64
4-931-757-31 SCREW (DIA. 2.6X8) (IT3B), TAPPING
65
1-673-632-11 CD LIGHT BOARD
* 66
4-217-309-01 HOLDER (CD LIGHT)
* 67
A-4419-257-A CONTROL BOARD, COMPLETE
* 68
4-217-333-01 PLATE, CD LIGHT
69
3-351-377-11 GEAR, DAMPER
70
4-218-204-01 FOOT (FRONT)
* 71
1-673-631-11 H/P BOARD
72
4-219-810-01 RUBBER (SPACE)
not
supplied
supplied
supplied
with RV801
with RV801
#1
#1
71
51
52
53
54
55
56
58
59
61
#3
57
70
63
64
60
64
65
64
72
66
not
supplied
supplied
64
67
69
68
64
62
– 47 –
(3)
CHASSIS SECTION
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
109
108
101
113
103
114
111
102
not
supplied
supplied
not
supplied
supplied
not
supplied
supplied
#1
not
supplied
supplied
#1
#1
#5
#5
#1
103
104
105
#1
#1
#4
#4
T901
KSL-2130CCP/K1N
113
107
112
110
115
not
supplied
supplied
#1
#1
#1
106
116
US, CND
AEP, MY,
SP, TH
SP, TH
UK, HK
116
116
The components identified by
mark
mark
! or dotted line with
mark
! are critical for safety.
Replace only with part num-
ber specified.
ber specified.
Les composants identifiés par une
marque
marque
! sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Ne les remplacer que par une pièce
portant le numéro spécifié.
! 101
A-4411-681-A BU ASSY (CD BLOCK)
102
2-627-236-01 SPRING (FRONT), COIL
* 103
2-627-234-01 INSULATOR
104
4-217-332-01 LID (CD)
* 105
A-4419-263-A POWER BOARD, COMPLETE (AEP, UK)
* 105
A-4419-947-A POWER BOARD, COMPLETE (US, CND)
* 105
A-4419-950-A POWER BOARD, COMPLETE (MY, SP, TH, HK)
* 106
4-217-338-01 PANEL, BACK (AEP, UK)
* 106
4-217-338-11 PANEL, BACK (MY, SP, TH, HK)
* 106
4-217-338-21 PANEL, BACK (US, CND)
* 107
A-4419-265-A MAIN BOARD, COMPLETE (AEP, UK)
* 107
A-4419-946-A MAIN BOARD, COMPLETE (US, CND)
* 107
A-4419-949-A MAIN BOARD, COMPLETE (MY, SP, TH, HK)
* 108
4-217-354-01 BUSHING, INSULATING
109
4-217-355-01 FOOT (REAR)
110
1-790-630-11 WIRE (FLAT TYPE)
111
1-773-126-11 WIRE (FLAT TYPE) (19 CORE)
112
A-4411-460-A TUNER PACK (AEP, UK)
112
A-4411-693-A TUNER PACK (US, CND)
112
A-4411-697-A TUNER PACK (MY, SP, TH, HK)
113
2-646-289-01 WASHER
114
2-627-235-01 SPRING (REAR), COIL
115
4-931-753-31 SCREW (DIA. 2.6X8) (IT3B), TAPPIN
! 116
1-575-651-11 CORD, POWER (UK, HK)
! 116
1-696-169-21 CORD, POWER (AEP, MY, SP, TH)
! 116
1-783-531-61 CORD, POWER (US, CND)
! T901
1-433-808-11 TRANSFORMER, POWER (AEP, UK)
! T901
1-433-809-11 TRANSFORMER, POWER (MY, SP, TH, HK)
! T901
1-433-810-11 TRANSFORMER, POWER (US, CND)
Click on the first or last page to see other HCD-CP1 / HCD-CP1K service manuals if exist.