Sony HBD-TZ145 Service Manual ▷ View online
HBD-TZ145
5
3 Pull out the disc tray.
2 Insert the tweezers etc. in the hole of the
chassis, and push the lever in the direction
of the arrow.
1 Remove the sheet.
4 Paste the sheet again.
– Bottom view –
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
MAIN BOARD SERVICE POSITION
• Connect the MAIN board (CN500) and the POWER board (CN901) with the jig cable.
• Connect the MAIN board (CN500) and the POWER board (CN901) with the jig cable.
Jig cable:
Part No.
Part No.
Description
A-1866-921-A
TZ140/145 SERVICE JIG ASSY
TZ140/145 service jig assy
POWER board
(CN901)
(CN901)
MAIN board
MAIN board
(CN500)
(CN500)
POWER board
POWER BOARD SERVICE POSITION
• Connect the MAIN board (CN500) and the POWER board (CN901) with the jig cable.
• Connect the MAIN board (CN500) and the POWER board (CN901) with the jig cable.
Jig cable:
Part No.
Part No.
Description
A-1866-921-A
TZ140/145 SERVICE JIG ASSY
POWER board
(CN901)
(CN901)
MAIN board
(CN500)
(CN500)
MAIN board
POWER board
TZ140/145 service jig assy
HBD-TZ145
6
DVD MECHANISM DECK SERVICE POSITION
DVD mechanism deck
(F-8829F1)
(F-8829F1)
MAIN board
insulating sheet
Ver. 1.4
Note:
The DVD mechanism deck for this unit has been changed in the
midway of production. About the New/Former discrimination,
refer to “ABOUT THE DVD MECHANISM DECK” on page 4.
midway of production. About the New/Former discrimination,
refer to “ABOUT THE DVD MECHANISM DECK” on page 4.
• Former type (F-8829F1)
• New type (CMS-LS5FP)
DVD mechanism deck
(CMS-LS5FP)
(CMS-LS5FP)
MAIN board
insulating sheet
HBD-TZ145
7
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
2-2. SS TOP COVER
(Page
(Page
7)
SET
2-3. DOOR
(Page
(Page
8)
2-4. POWER
BOARD
(Page
8)
2-16. MAIN BOARD
(Page
(Page
19)
2-10. DVD MECHANISM DECK
(New type (for CMS-LS5FP))
(Page
14)
2-5. FRONT CABINET BLOCK
(Page
(Page
9)
2-7. DVD MECHANISM DECK BLOCK
(Page
(Page
11)
2-8. FFC
HOLDER
(Former type (for F-8829F1))
(Page
12)
2-11. HOLDER CHUCK
(New type (for CMS-LS5FP))
(Page
15)
2-12. TRAY DISC-1
(New type (for CMS-LS5FP))
(Page
15)
2-13. TRAY DISC-2 (New type
(for CMS-LS5FP)) (Page 16)
2-14. OPTICAL PICK-UP BLOCK-1
(CMS-S79RFVP) (New type
(for CMS-LS5FP)) (Page 17)
2-15. OPTICAL PICK-UP BLOCK-2
(CMS-S79RFVP) (New type
(for CMS-LS5FP)) (Page 18)
2-9. OPTICAL PICK-UP BLOCK
(CMS-S76RFS3G)
(CMS-S76RFS3G)
(Former type (for F-8829F1))
(Page
13)
2-6. STANDBY
BOARD,
CONTROL
BOARD
(Page
10)
Note: The DVD mechanism deck for this unit has been
changed in the midway of production.
About the New/Former discrimination, refer to
“ABOUT THE DVD MECHANISM DECK”
on page 4.
Note:
Follow the disassembly procedure in the numerical order given.
2-2. SS TOP COVER
6 SS top cover
1 screw (BVTT3 u 6)
1 screw
(BVTT3
(BVTT3
u 6)
2 four screws
(BVTT3
(BVTT3
u 6)
4
5 eight claws
3
3
Ver. 1.5
HBD-TZ145
8
2-3. DOOR
5 five claws
6 door
3 Pull out the disc tray.
2 Insert the tweezers etc. in the hole of the
chassis, and push the lever in the direction
of the arrow.
1 Remove the sheet.
4 Paste the sheet again.
– Bottom view –
2-4. POWER BOARD
4 POWER board
POWER board
1 power cord connector
(CN900)
(CN900)
power cord
3 connector
(CN901)
(CN901)
2 three screws
(BVTT3
(BVTT3
u 7)
2 screw
(BVTT3
(BVTT3
u 7)
3RZHUFRUGVHWWLQJ
Click on the first or last page to see other HBD-TZ145 service manuals if exist.