Sony HBD-E385 / HBD-E390 / HBD-T39 Service Manual ▷ View online
SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
SPECIFICATIONS
BLU-RAY DISC/DVD RECEIVER
9-890-584-04
2013A80-1
©
2013.01
US Model
HBD-E385/E390/T39
Canadian Model
HBD-E390
Ver. 1.3 2013.01
• HBD-E385 is the amplifi er, video, HDMI, BD/DVD/CD system, USB, LAN, wireless LAN and FM tuner section in BDV-E385.
• HBD-E390 is the amplifi er, video, HDMI, BD/DVD/CD system, USB, LAN, wireless LAN and FM tuner section in BDV-E390.
• HBD-T39 is the amplifi er, video, HDMI, BD/DVD/CD system, USB, LAN, wireless LAN and FM tuner section in BDV-T39.
• HBD-E390 is the amplifi er, video, HDMI, BD/DVD/CD system, USB, LAN, wireless LAN and FM tuner section in BDV-E390.
• HBD-T39 is the amplifi er, video, HDMI, BD/DVD/CD system, USB, LAN, wireless LAN and FM tuner section in BDV-T39.
Model Name Using Similar Mechanism
BDP-S390
Mechanism Type
BPX-7
Optical Pick-up Block Name
KEM480AAA
HBD-E385/E390/T39
Amplifier Section
BDV-E385/BDV-E390/BDV-T39
US models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 3 ohms loads, both
channels driven, from 180
Hz - 20 kHz; rated 50 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
channels driven, from 180
Hz - 20 kHz; rated 50 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
Other models:
POWER OUTPUT (rated)
Front L/Front R:
POWER OUTPUT (rated)
Front L/Front R:
75 W + 75 W (at 3 ohms,
1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R/Surround L/Surround R:
Front L/Front R/Surround L/Surround R:
125 W (per channel at
3 ohms, 1 kHz)
Center:
250 W (at 6 ohms, 1 kHz)
Subwoofer:
250 W (at 6 ohms, 80 Hz)
Inputs (Analog)
AUDIO (AUDIO IN)
AUDIO (AUDIO IN)
Sensitivity: 1 V/400 mV
Inputs (Digital)
TV (Audio Return Channel/OPTICAL)
TV (Audio Return Channel/OPTICAL)
Supported formats: LPCM
2CH (up to 48 kHz), Dolby
Digital, DTS
2CH (up to 48 kHz), Dolby
Digital, DTS
Video Section
Outputs
VIDEO: 1 Vp-p 75 ohms
HDMI Section
Connector
Type A (19pin)
BD/DVD/Super Audio CD/CD System
Signal format system
NTSC
USB Section
(USB) port:
Type A (For connecting
USB memory, memory
card reader, digital still
camera, and digital video
camera)
USB memory, memory
card reader, digital still
camera, and digital video
camera)
LAN Section
LAN (100) terminal
100BASE-TX Terminal
Wireless LAN Section
Blu-ray Disc/DVD receiver (HBD-E390/HBD-
E385/HBD-T39)
Blu-ray Disc/DVD receiver (HBD-E390/HBD-
E385/HBD-T39)
Standards Compliance
IEEE 802.11 b/g/n
Frequency and Channel
2.4 GHz - 2.4835 GHz
[CH1 -11]
[CH1 -11]
FM Tuner Section
System
PLL quartz-locked digital
synthesizer
synthesizer
Tuning range
87.5 MHz - 108.0 MHz
(100 kHz step)
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
General
Power requirements
120 V AC, 60 Hz
Power consumption
BDV-E385/BDV-E390/
BDV-T39
BDV-E385/BDV-E390/
BDV-T39
On: 130 W
Standby: 0.3 W (at the
Power Saving mode)
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.)
430 mm × 50 mm × 275
mm (17 in × 2 in ×
10
mm (17 in × 2 in ×
10
7
/
8
in) (w/h/d) incl.
projecting parts
Mass (approx.)
2.8 kg (6 lb 2
3
/
4
oz)
Design and specifications are subject to change
without notice.
without notice.
s Standby power consumption 0.3W.
s Over 85% power efficiency of amplifier block is
s Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
Photo: HBD-E390
HBD-E385/E390/T39
2
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
• This system incorporates with Dolby* Digital and Dolby Pro Logic adaptive matrix surround
decoder and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued & pending.
other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks of
DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• This system incorporates High-Defi nition Multimedia Interface (HDMI
TM
) technology. HDMI,
the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trade-
marks of HDMI Licensing LLC in the United States and other countries.
marks of HDMI Licensing LLC in the United States and other countries.
• Java is a trademark of Oracle and/or its affi liates.
• “BD-LIVE” and “BONUSVIEW” are trademarks of Blu-ray Disc Association.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,” “DVD-RW,” “DVD+R,” “DVD-R,” “DVD VIDEO,” and “CD”
• “BD-LIVE” and “BONUSVIEW” are trademarks of Blu-ray Disc Association.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,” “DVD-RW,” “DVD+R,” “DVD-R,” “DVD VIDEO,” and “CD”
logos are trademarks.
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray Disc Association.
• “BRAVIA” is a trademark of Sony Corporation.
• “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corpora-
• “BRAVIA” is a trademark of Sony Corporation.
• “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corpora-
tion.
•
, “XMB,” and “xross media bar” are trademarks of Sony Corporation and Sony Computer
Entertainment Inc.
• “PlayStation” is a registered trademark of Sony Computer Entertainment Inc.
• Music and video recognition technology and related data are provided by Gracenote
• Music and video recognition technology and related data are provided by Gracenote
®
.
Gracenote is the industry standard in music recognition technology and related content delivery.
For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and
video-related data from Gracenote, Inc., copyright © 2000-present Gracenote. Gracenote Soft-
ware, copyright © 2000-present Gracenote. One or more patents owned by Gracenote apply to
this product and service. See the Gracenote website for a nonexhaustive list of applicable Grace-
note patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and
the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in
the United States and/or other countries.
For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and
video-related data from Gracenote, Inc., copyright © 2000-present Gracenote. Gracenote Soft-
ware, copyright © 2000-present Gracenote. One or more patents owned by Gracenote apply to
this product and service. See the Gracenote website for a nonexhaustive list of applicable Grace-
note patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and
the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in
the United States and/or other countries.
• Wi-Fi
®
, Wi-Fi Protected Access
®
and Wi-Fi Alliance
®
are registered marks of the Wi-Fi Alliance.
• Wi-Fi CERTIFIED™, WPA™, WPA2™ and Wi-Fi Protected Setup™ are marks of the Wi-Fi
Alliance (BDV-E390/BDV-E385/ BDV-T39).
• WPA™, WPA2™ and Wi-Fi Protected Setup™ are marks of the Wi-Fi Alliance (BDV-E490/
BDV-E290/BDV-E290/BDV-E190).
• The Wi-Fi CERTIFIED Logo is a certifi cation mark of the Wi-Fi Alliance (BDV-E390/ BDV-
E385/BDV-T39).
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance (BDV-E390/BDV-E385/
BDV-T39).
• “PhotoTV HD” and the “PhotoTV HD” logo are trademarks of Sony Corporation.
• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and
• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and
Thomson.
• This product incorporates proprietary technology under license from Verance Corporation and
is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending
as well as copyright and trade secret protection for certain aspects of such technology. Cinavia
is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights
reserved by Verance. Reverse engineering or disassembly is prohibited.
as well as copyright and trade secret protection for certain aspects of such technology. Cinavia
is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights
reserved by Verance. Reverse engineering or disassembly is prohibited.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed
to connect specifi cally to iPod or iPhone, respectively, and has been certifi ed by the developer
to meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
to meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
• Windows Media is either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.
This product contains technology subject to certain intellectual property rights of Microsoft.
Use or distribution of this technology outside of this product is prohibited without the appro-
priate license(s) from Microsoft. Content owners use Microsoft
Use or distribution of this technology outside of this product is prohibited without the appro-
priate license(s) from Microsoft. Content owners use Microsoft
®
PlayReady™ content access
technology to protect their intellectual property, including copyrighted content. This device
uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected
content. If the device fails to properly enforce restrictions on content usage, content owners
may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content protected by other content access
technologies. Content owners may require you to upgrade PlayReady to access their content. If
you decline an upgrade, you will not be able to access content that requires the upgrade.
uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected
content. If the device fails to properly enforce restrictions on content usage, content owners
may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content protected by other content access
technologies. Content owners may require you to upgrade PlayReady to access their content. If
you decline an upgrade, you will not be able to access content that requires the upgrade.
• DLNA
®
, the DLNA Logo and DLNA CERTIFIED
TM
are trademarks, service marks, or
certifi cation marks of the Digital Living Network Alliance.
• Opera
®
Browser from Opera Software ASA. Copyright 1995-2010 Opera Software ASA. All
rights reserved.
• All other trademarks are trademarks of their respective owners.
• Other system and product names are generally trademarks or registered trademarks of the
• Other system and product names are generally trademarks or registered trademarks of the
manufacturers.
TM
and ® marks are not indicated in this document.
This application or device contains software from Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this application
to perform disc and/or fi le identifi cation and obtain music-related information, including name,
artist, track, and title information (“Gracenote Data”) from online servers or embedded databases
(collectively, “Gracenote Servers”) and to perform other functions. You may use Gracenote Data
only by means of the intended End-User functions of this application or device.
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You agree not to assign, copy, transfer or transmit
the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE
OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE
SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software,
and Gracenote Servers will terminate if you violate these restrictions. If your license terminates,
you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under no circumstances will Gracenote become liable for
any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce
its rights under this Agreement against you directly in its own name.
The Gracenote service uses a unique identifi er to track queries for statistical purposes. The purpose
of a randomly assigned numeric identifi er is to allow the Gracenote service to count queries without
knowing anything about who you are. For more information, see the web page for the Gracenote
Privacy Policy for the Gracenote service.
The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote
makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote
Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the
Gracenote Servers or to change data categories for any cause that Gracenote deems suffi cient.
No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that
functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not
obligated to provide you with new enhanced or additional data types or categories that Gracenote
may provide in the future and is free to discontinue its services at any time. GRACENOTE
DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE
RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE
OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST
REVENUES.
© Gracenote, Inc. 2009
(“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this application
to perform disc and/or fi le identifi cation and obtain music-related information, including name,
artist, track, and title information (“Gracenote Data”) from online servers or embedded databases
(collectively, “Gracenote Servers”) and to perform other functions. You may use Gracenote Data
only by means of the intended End-User functions of this application or device.
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You agree not to assign, copy, transfer or transmit
the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE
OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE
SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software,
and Gracenote Servers will terminate if you violate these restrictions. If your license terminates,
you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under no circumstances will Gracenote become liable for
any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce
its rights under this Agreement against you directly in its own name.
The Gracenote service uses a unique identifi er to track queries for statistical purposes. The purpose
of a randomly assigned numeric identifi er is to allow the Gracenote service to count queries without
knowing anything about who you are. For more information, see the web page for the Gracenote
Privacy Policy for the Gracenote service.
The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote
makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote
Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the
Gracenote Servers or to change data categories for any cause that Gracenote deems suffi cient.
No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that
functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not
obligated to provide you with new enhanced or additional data types or categories that Gracenote
may provide in the future and is free to discontinue its services at any time. GRACENOTE
DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE
RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE
OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST
REVENUES.
© Gracenote, Inc. 2009
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
End User License Information
Gracenote
®
End User License Agreement
HBD-E385/E390/T39
3
SAFETY CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)
1.5 k
Ω
0.15
μF
AC
voltmeter
(0.75 V)
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Parts on Set
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
HBD-E385/E390/T39
4
1.
SERVICING NOTES
............................................. 5
2. DISASSEMBLY
2-1. Disassembly
Flow
........................................................... 12
2-2. How To Bend FFC .......................................................... 13
2-3. Left Panel, Right Panel ................................................... 14
2-4. Loading
2-3. Left Panel, Right Panel ................................................... 14
2-4. Loading
Panel
................................................................. 14
2-5. Top Panel, Front Panel Assy ........................................... 15
2-6. Top Chassis, Wireless LAN Card (WLC1),
2-6. Top Chassis, Wireless LAN Card (WLC1),
POWER KEY Board, PANEL Board ............................. 16
2-7. BD Drive (BPX-7) .......................................................... 17
2-8. MB148
2-8. MB148
Board
................................................................. 17
2-9. Switching Regulator (SWR1) ......................................... 18
2-10. AMP Board ..................................................................... 18
2-11. Optical Pick-up Block (KEM480AAA),
Wire
2-10. AMP Board ..................................................................... 18
2-11. Optical Pick-up Block (KEM480AAA),
Wire
(Flat
Type)
..............................................................
19
3.
TEST MODE
............................................................ 20
4.
ELECTRICAL CHECK
......................................... 28
5. DIAGRAMS
5-1. Block Diagram - SERVO Section - ................................ 29
5-2. Block Diagram - MEMORY/HDMI Section - ................ 30
5-3. Block Diagram - MAIN Section - ................................... 31
5-4. Block Diagram - AMP Section - ..................................... 32
5-5. Block Diagram - POWER SUPPLY Section - ................ 33
5-6. Printed Wiring Board - MB148 Board (Side A) - ........... 35
5-7. Printed Wiring Board - MB148 Board (Side B) - ........... 36
5-8. Schematic Diagram - MB148 Board (1/9) - ................... 37
5-9. Schematic Diagram - MB148 Board (2/9) - ................... 38
5-10. Schematic Diagram - MB148 Board (3/9) - ................... 39
5-11. Schematic Diagram - MB148 Board (4/9) - ................... 40
5-12. Schematic Diagram - MB148 Board (5/9) - ................... 41
5-13. Schematic Diagram - MB148 Board (6/9) - ................... 42
5-14. Schematic Diagram - MB148 Board (7/9) - ................... 43
5-15. Schematic Diagram - MB148 Board (8/9) - ................... 44
5-16. Schematic Diagram - MB148 Board (9/9) - ................... 45
5-17. Printed Wiring Board - AMP Board (Side A) - ............... 46
5-18. Printed Wiring Board - AMP Board (Side B) - ............... 47
5-19. Schematic Diagram - AMP Board (1/3) - ....................... 48
5-20. Schematic Diagram - AMP Board (2/3) - ....................... 49
5-21. Schematic Diagram - AMP Board (3/3) - ....................... 50
5-22. Printed Wiring Boards - PANEL Section - ..................... 51
5-23. Schematic Diagram - PANEL Section - .......................... 52
5-24. Printed Wiring Board - TUNER2FMF-NS Board - ........ 53
5-25. Schematic Diagram - TUNER2FMF-NS Board - ........... 54
5-2. Block Diagram - MEMORY/HDMI Section - ................ 30
5-3. Block Diagram - MAIN Section - ................................... 31
5-4. Block Diagram - AMP Section - ..................................... 32
5-5. Block Diagram - POWER SUPPLY Section - ................ 33
5-6. Printed Wiring Board - MB148 Board (Side A) - ........... 35
5-7. Printed Wiring Board - MB148 Board (Side B) - ........... 36
5-8. Schematic Diagram - MB148 Board (1/9) - ................... 37
5-9. Schematic Diagram - MB148 Board (2/9) - ................... 38
5-10. Schematic Diagram - MB148 Board (3/9) - ................... 39
5-11. Schematic Diagram - MB148 Board (4/9) - ................... 40
5-12. Schematic Diagram - MB148 Board (5/9) - ................... 41
5-13. Schematic Diagram - MB148 Board (6/9) - ................... 42
5-14. Schematic Diagram - MB148 Board (7/9) - ................... 43
5-15. Schematic Diagram - MB148 Board (8/9) - ................... 44
5-16. Schematic Diagram - MB148 Board (9/9) - ................... 45
5-17. Printed Wiring Board - AMP Board (Side A) - ............... 46
5-18. Printed Wiring Board - AMP Board (Side B) - ............... 47
5-19. Schematic Diagram - AMP Board (1/3) - ....................... 48
5-20. Schematic Diagram - AMP Board (2/3) - ....................... 49
5-21. Schematic Diagram - AMP Board (3/3) - ....................... 50
5-22. Printed Wiring Boards - PANEL Section - ..................... 51
5-23. Schematic Diagram - PANEL Section - .......................... 52
5-24. Printed Wiring Board - TUNER2FMF-NS Board - ........ 53
5-25. Schematic Diagram - TUNER2FMF-NS Board - ........... 54
TABLE OF CONTENTS
6.
EXPLODED VIEWS
6-1. Panel
Section
................................................................... 79
6-2. Front Panel Section ......................................................... 80
6-3. Chassis Bottom Section .................................................. 81
6-4. Chassis
6-3. Chassis Bottom Section .................................................. 81
6-4. Chassis
Section
............................................................... 82
6-5. BD Drive Section (BPX-7) ............................................. 83
7.
ELECTRICAL PARTS LIST
.............................. 84
NOTES ON CHIP COMPONENT REPLACEMENT
•
•
Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
•
•
Keep the temperature of soldering iron around 270 °C during
repairing.
repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
or unsoldering.
This appliance is classified as a
CLASS 3R LASER product.
Visible and invisible laser radiation
is emitted when the laser protective
housing is opened, so be sure to
avoid direct eye exposure.
CLASS 3R LASER product.
Visible and invisible laser radiation
is emitted when the laser protective
housing is opened, so be sure to
avoid direct eye exposure.
This marking is located on the laser
protective housing inside the
enclosure.
protective housing inside the
enclosure.
This appliance is classified as a
CLASS 1 LASER product. This
marking is located on the rear
exterior.
CLASS 1 LASER product. This
marking is located on the rear
exterior.