DOWNLOAD Sony DVP-NS29 / DVP-NS30 / DVP-NS32 / DVP-NS33 / DVP-NS52P / HTP-32DW / HTP-32SS Service Manual ↓ Size: 5.4 MB | Pages: 83 in PDF or view online for FREE

1-5

◆PROGRESSIVE VIDEO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks, and
– you want to fix the conversion method to PROGRESSIVE VIDEO for video-based software.
Select this if the image is not clear when you select PROGRESSIVE AUTO.
Note that the picture will not be clear or no picture will appear if you select these settings when 
either of the above conditions is not met.
◆NORMAL (INTERLACE)
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT 
(VIDEO) or S VIDEO OUT).
◆About DVD software types and the conversion method
DVD software can be divided into two types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at 
25 frames/50 fields (30 frames/60 fields) per second. Film-based software is derived from film 
and displays images at 24 frames per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format, 
the progressive signals need to be converted to match the type of DVD software that you are 
watching.

• When you play video-based software in progressive signal format, sections of some types of images may 

appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT 
jacks. Images from the S VIDEO OUT and LINE OUT (VIDEO) jacks are unaffected as they are output in 
the normal (interlace) format.

• If you set “LINE” in “SCREEN SETUP” to “RGB,” then the player switches to “NORMAL 

(INTERLACE).” This will happen even though you select “PROGRESSIVE AUTO” or “PROGRESSIVE 
VIDEO.”

• When using LINE OUT (VIDEO) or S VIDEO OUT, the picture may appear to flicker each time the 

PROGRESSIVE button on the front panel is pressed (Interlace switches to Progressive or vice versa).

,continued

Select one of the following patterns 

A or B, according to the input jack on your TV monitor, 

projector, or AV amplifier (receiver). 
This will enable you to listen to sound.

z Hint
For correct speaker location, see the operating instructions supplied with the connected components.

VIDEO

AUDIO

INPUT

L

R

R

AUDIO

L

PR/CR

PB/CB

S VIDEO OUT

LINE

(RGB)

-TV

L

C E N T E R

VIDEO

LINE OUT

VIDEO

LINE OUT

AUDIO

R

L

Y

COAXIAL

COMPONENT VIDEO OUT

DIGITAL OUT

OPTICAL

COAXIAL

DIGITAL OUT

OPTICAL

AV amplifier (receiver) 
with a decoder

(red)

TV, projector, or AV 
amplifier (receiver)

Audio/video cord 
(not supplied)

: Signal flow

Coaxial digital cord 
(not supplied)

to DIGITAL OUT 
(COAXIAL or OPTICAL*

2

)

to LINE OUT L/R (AUDIO)

Rear (L)

CD/DVD player

(white)

(yellow)*

1

(yellow)*

1

(white)

(red)

[Speakers]

Front (L)

[Speakers]

to coaxial 
digital input

Rear (R)

Front (R)

Subwoofer

Center

*

1

The yellow plug is used for video signals (page 16).

*

2

DVP-NS52P only.

Optical digital cord (not supplied)
Remove jack cap before connecting

or

to optical 
digital input

A

This connection will use your TV’s or stereo 
amplifier’s (receiver’s) two speakers for 
sound. Connect using the audio/video cord 
(not supplied).

• Surround effect (page 44)
TV: Dynamic Theatre, Dynamic, Wide, 
Night

Stereo amplifier (receiver): Standard, Night

B

If your AV amplifier (receiver) has a Dolby*

1

Digital, DTS*

2

 or MPEG audio decoder and 

a digital input jack, use this connection.
Connect using a coaxial or optical (DVP-
NS52P only) digital cord (not supplied).

• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG 
audio (5.1ch)

*1

Manufactured under license from Dolby 
Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol 
are trademarks of Dolby Laboratories.

*2

“DTS” and “DTS Digital Out” are trademarks of 
Digital Theater Systems, Inc.

• After you have completed the connection, make 

the appropriate settings in Quick Setup (page 22). 
If your AV amplifier (receiver) has an MPEG 
audio decoder function, set “MPEG” to “MPEG” 
in Audio Setup (page 69). Otherwise, no sound or 
a loud noise will come from your speakers.

• The surround sound effects of this player cannot 

be used with this connection.

• In order to listen to DTS sound tracks, you must 

use this connection. DTS sound tracks are not 
output through the LINE OUT L/R (AUDIO) 
jacks, even if you set “DTS” to “ON” in Quick 
Setup (page 22).

Yellow

White (L)

Red (R)

Yellow

White (L)

Red (R)

Coaxial cord

Optical cord

,continued

Plug the player and TV mains lead (power cord) into a mains.

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press 

>. To return to the previous adjustment, press ..

The on-screen display differ depending on the player model.

[/1.

“Press [ENTER] to run QUICK SETUP” 
(press enter to run Quick Setup) appears 
at the bottom of the screen. If this 
message does not appear, select 
“QUICK” (quick) under “SETUP” 
(setup) in the Control Menu to run Quick 
Setup (page 65).

The Setup Display for selecting the 
language used in the on-screen display 
appears.
The available languages differ depending 
upon the player model.

X/x to select a language.

The player displays the menu and 
subtitles in the selected language.

The Setup Display for selecting the 
aspect ratio of the TV to be connected 
appears.

ENTER

LANGUAGE SETUP

OSD:
MENU:
AUDIO:
SUBTITLE:

ITALIANO

ESPAÑOL

NEDERLANDS

DANSK

SVENSKA

FRANÇAIS

ENGLISH

ENGLISH

DEUTSCH

SCREEN SETUP

TV TYPE:

16:9

4:3 LETTER BOX

4:3 PAN SCAN

FULL

SCREEN SAVER:

LINE:

BACKGROUND:

4:3 OUTPUT:

16:9

1-6

X/x to select the setting that 

◆ If you have a wide-screen TV or a 4:3 
standard TV with a wide-screen mode
• 16:9 (page 66)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN 

(page 66)

The Setup Display for selecting the type 
of video signal output from the LINE 
(RGB)-TV jack appears.

X/x to select the type of 

◆ Video signals
• VIDEO (page 66)
◆ S video signals
• S VIDEO (page 66)
◆ RGB signals
• RGB (page 66)
(DVP-NS52P only) When you select 
“RGB,” you will be unable to use the 
PROGRESSIVE button, and the player 
will not output video signals from the 
COMPONENT VIDEO OUT jacks.

The Setup Display for selecting the type 
of jack used to connect your amplifier 
(receiver) appears.

X/x to select the type of 

If you did not connect an AV amplifier 
(receiver), select “NO,” then go to step 
15.
If you connected an AV amplifier 
(receiver) using just an audio cord, select 
“YES: LINE OUTPUT L/R (AUDIO),” 
then go to step 15.
If you connected an AV amplifier 
(receiver) using either a optical or coaxial  
digital cord, select “YES: DIGITAL 
OUTPUT.”

X/x to select the type of 

If your AV amplifier (receiver) has a 
Dolby Digital decoder, select “DOLBY 
DIGITAL.” Otherwise, select “D-PCM.”

“DTS” is selected.

X/x to select whether or 

If your AV amplifier (receiver) has a 
DTS decoder, select “ON.” Otherwise, 
select “OFF.”

SCREEN SETUP

TV TYPE:
SCREEN SAVER:
BACKGROUND:

16:9

ON

JACKET PICTURE

LINE:

VIDEO

VIDEO

S VIDEO

RGB

4:3 OUTPUT:

YES

NO

Is this player connected to an amplifier 
(receiver) ? Select the type of jack you 
are using.

LINE OUTPUT L/R (AUDIO)

DIGITAL OUTPUT

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

D-PCM
D-PCM

48kHz/96kHz PCM:

48kHz/16bit

DTS:

DOLBY DIGITAL

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

D-PCM

PCM

DTS:
48kHz/96kHz PCM:

OFF
OFF

ON

,continued

Quick Setup is finished. All connections 
and setup operations are complete. 
If your AV amplifier (receiver) has an 
MPEG audio decoder, set “MPEG” to 
“MPEG” (page 69).

Depending on the DVD or VIDEO CD, some 
operations may be different or restricted.
Refer to the operating instructions supplied 
with your disc.

[/1.

The player turns on.

◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and 
select the appropriate channel so that you 
can hear sound from the player.

A on the player, and place a 

H.

The disc tray closes. The player starts 
playback (continuous play). Adjust the 
volume on the TV or the amplifier 
(receiver).
Depending on the disc, a menu may 
appear on the TV screen. For DVD 
VIDEOs, see page 28. For VIDEO CDs, 
see page 29.

Press

 [/1. The player enters standby mode.

z Hint
You can have the player turn off automatically 
whenever you leave it in stop mode for more than 
30 minutes. To turn this function on or off, set 
“AUTO POWER OFF” in “CUSTOM SETUP” to 
“ON” or “OFF” (

page 67)

.

• DTS audio signals are output only through the 

DIGITAL OUT (COAXIAL or OPTICAL*) jack.

• When you play a DVD VIDEO with DTS sound 

tracks, set “DTS” to “ON” in “AUDIO SETUP” 
(page 70).

• If you connect the player to audio equipment 

without a DTS decoder, do not set “DTS” to “ON” 
in “AUDIO SETUP” (page 70). A loud noise may 
come out from the speakers, affecting your ears or 
causing the speakers to be damaged.

* DVP-NS52P only

ENTER

RETURN

Playback side facing down

*

1

DVD VIDEOs/DVD-RWs/DVD-Rs only. The 
button can be used except for DivX video files.

*

2

DVD VIDEOs/DVD-RWs/DVD-Rs/
DVD+RWs only. The button can be used except 
for DivX video files.

*

3

Video and JPEG pictures only (except 
BACKGROUND pictures). You can move the 
enlarged picture using 

C/X/x/c. Depending 

upon the contents of the disc, the zoom function 
may be cancelled automatically when the 
picture is moved.

You may not be able to use the Replay or Advance 
function with some scenes.

You can listen to dialogue or sound while 
playing the current scene quickly or slowly.

The speed changes when you press either 
FAST PLAY or SLOW PLAY.

Press

H.

• You can only use this function with DVDs/

VIDEO CDs/Super VCDs and DVD-RWs in VR 
mode only.

• “Operation not possible” will appear when 

maximum or minimum speed is reached.

• During FAST PLAY and SLOW PLAY mode, 

you cannot change angle (page 46), subtitle (page 
46), and the sound (page 42). The sound can only 
be changed for VIDEO CDs/Super VCDs.

• Fast Play and Slow Play functions do not work 

when playing DTS sound tracks.

• You cannot use Fast Play and Slow Play function 

when playing a still picture on DVD-RW in VR 
mode.

You can lock the disc tray to prevent children 
from opening it.

When the player is in standby mode, press 
O RETURN, ENTER, and then [/1 on the 
remote.

The player turns on and “LOCKED” appears 
on the front panel display. The 

A

 and 

Z

buttons on the player or the remote do not 
work while the Child Lock is set.

When the player is in standby mode, press 
O RETURN, ENTER, and then [/1 again.

Even if you select “RESET” under “SETUP” in the 
Control Menu (page 65), the disc tray remains 
locked.

Stop

Press 

x

Pause

Press 

X

Resume play after 
pause

Press 

X or H

Go to the next chapter, 
track, or scene in 
continuous play mode

Press 

>

Go back to the 
previous chapter, 
track, or scene in 
continuous play mode

Press 

.

Stop play and remove 
the disc

Press 

Z

Replay the previous 
scene*

1

Press  
(replay) during 
playback

Briefly fast forward 
the current scene*

2

Press  
(advance) during 
playback

Magnify the image*

3

Press ZOOM 
repeatedly. Press 
CLEAR to cancel. 

CLEAR

(replay)

ZOOM

SLOW PLAY

FAST PLAY

(advance)

1-7

The player remembers the point where you 
stopped the disc.

The player remembers the point where you 
stopped the disc even if the player enters 
standby mode by pressing 

[/1.

x to stop 

“RESUME” appears on the front panel 
display.

H.

The player starts playback from the point 
where you stopped the disc in Step 1.

z Hint
To play from the beginning of the disc, press 

x 

twice, then press 

H.

• The resume playback point for the current disc is 

cleared when:

– you change the play mode.
– you change the settings on the Setup Display.
– you disconnect the mains lead.

• When playing a DVD-RW in VR mode, the point 

where you stopped is cleared when the disc tray is 
opened or the mains lead is disconnected.

• When playing a CD, the point where you stopped 

is cleared when the disc tray is opened or the 
mains lead is disconnected.

• When playing a DATA CD, the point where you 

stopped is cleared when the player enters standby 
mode, the disc tray is opened, or the mains lead is 
disconnected.

• This function may not work with some discs.
• Resume Play does not work during Shuffle Play 

and Programme Play.

The player stores the point where you stopped 
the disc for up to 6 discs and resumes 
playback the next time you insert the same 
disc. When you store a resume playback point 
for the seventh disc, the resume playback 
point for the first disc is deleted.

z Hints
• To play from the beginning of the disc, press 

x

twice, then press 

H.

• To turn off the Multi-disc Resume function, set 

“MULTI-DISC RESUME” in “CUSTOM 
SETUP” to “OFF” (page 68). Playback restarts at 
the resume point only for the current disc in the 
player.

• “MULTI-DISC RESUME” in “CUSTOM 

SETUP” must be set to “ON” (default) for this 
function to work (page 67).

• The point where you stopped playing is cleared 

when:

– you change the play mode.
– you change the settings on the Setup Display.
• This function may not work with some discs.
• Resume Play does not work during Shuffle Play 

and Programme Play.

• If “MULTI-DISC RESUME” in “CUSTOM 

SETUP” is set to “ON” and you playback a 
recorded disc such as DVD-RW, the player may 
playback other recorded discs from the same 
resume point. To play from the beginning, press 
x twice and then press H.

A DVD is divided into long sections of a 
picture or a music feature called “titles.” 
When you play a DVD which contains 
several titles, you can select the title you want 
using the TOP MENU button.
When you play DVDs that allow you to select 
items such as language for the sound and 
subtitles, select these items using the MENU 
button.

The disc’s menu appears on the TV 
screen.
The contents of the menu vary from disc 
to disc.

C/X/x/c or the number 

If you press the number buttons, the 
following display appears.
Press the number buttons to select the 
item you want.

Some DVD-RWs in VR (Video Recording) 
mode have two types of titles for playback: 
originally recorded titles (ORIGINAL) and 
titles that can be created on recordable DVD 
players for editing (PLAY LIST). You can 
select the type of title to be played.

The Control Menu appears.

X/x to select 

The options for “ORIGINAL/PLAY 
LIST” appear.

X/x to select a setting.

• PLAY LIST: plays the titles created 

from “ORIGINAL” for editing.

• ORIGINAL: plays the titles originally 

recorded.

ENTER

MENU

TOP MENU

Number 
buttons

1

ENTER

DISPLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

DVD-RW

PLAY LIST

PLAY LIST

ORIGINAL

T

 1 : 3 2 : 5 5

PBC (Playback Control) allows you to play 
VIDEO CDs interactively by following the 
menu on the TV screen.

The menu for your selection appears.

Refer to the instructions supplied with the 
disc, as the operating procedure may 
differ depending on the VIDEO CD.

Press 

O RETURN.

z Hint
To play without using PBC, press 

./> or the 

number buttons while the player is stopped to select 
a track, then press

 H or ENTER.

“Play without PBC” appears on the TV screen and 
the player starts continuous play. You cannot play 
still pictures such as a menu.
To return to PBC playback, press 

x twice then 

press 

H.

Depending on the VIDEO CD, “Press ENTER” in 
step 3 may appear as “Press SELECT” in the 
instructions supplied with the disc. In this case, 
press

 H.

ENTER

RETURN

Number 
buttons

You can set the following play modes:
• Programme Play (page 30)
• Shuffle Play (page 31)
• Repeat Play (page 32)
• A-B Repeat Play (page 33)

The play mode is cancelled when:
– you eject the disc.
– the player enters standby mode by pressing 

[/1.

You can play the contents of a disc in the 
order you want by arranging the order of the 
titles, chapters, or tracks on the disc to create 
your own programme. You can programme 
up to 99 titles, chapters, and tracks.

The Control Menu appears.

X/x to select 

The options for “PROGRAM” appear.

X/x to select “SET

t

c.

The cursor moves to the title or track row 
“T” (in this case, “01”).

◆ When playing a DVD VIDEO
For example, select chapter “03” of title 
“02.”
Press

X/x to select “02” under “T,” then 

press ENTER.

CLEAR

ENTER

DISPLAY

OFF
OFF
SET
ON

PLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

T

 1 : 3 2 : 5 5

DVD VIDEO

PROGRAM

1. TITLE

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

T

– –

01
02
03
04
05

“TRACK” is displayed when you play 
a VIDEO CD or CD.

Titles or tracks 
recorded on a disc

PROGRAM

1. TITLE – –

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

T

C

ALL

01
02
03
04
05
06

– –

02
03
04
05

01

Chapters recorded on a disc

PROGRAM

1. TITLE – –

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

C

ALL

03
04
05
06

T

– –

01
02
03
04
05

02

01

1-8

Next, press 

X/x to select “03” under “C,” 

then press ENTER.

◆ When playing a VIDEO CD or CD
For example, select track “02.”
Press

X/x to select “02” under “T,” then 

press ENTER.

The programmed titles, chapters, and 
tracks are displayed in the selected order.

H to start Programme Play.

Programme Play begins.
When the programme ends, you can 
restart the same programme again by 
pressing

H.

Press CLEAR, or select “OFF” in step 3. To 
play the same programme again, select “ON” 
in step 3 and press ENTER.

Follow steps 1 to 3 of “Creating your 
own programme (Programme Play).”

Select the programme number of the title, 
chapter, or track you want to change or 
cancel using 

X/x and press c. If you 

want to delete the title, chapter, or track 
from the programme, press CLEAR.

Follow step 5 for new programming. To 
cancel a programme, select “--” under 
“T,” then press ENTER.

Follow steps 1 to 3 of “Creating your own 
programme (Programme Play).”

Press

X and select “ALL CLEAR.”

Press ENTER.

z Hint
You can perform Repeat Play or Shuffle Play of 
programmed titles, chapters, or tracks. During 
Programme Play, follow the steps of Repeat Play 
(page 32) or Shuffle Play (page 31).

• When you programme tracks on a Super VCD, the 

total playing time is not displayed.

• You cannot use this function with VIDEO CDs or 

Super VCDs with PBC playback.

You can have the player “shuffle” titles, 
chapters, or tracks. Subsequent “shuffling” 
may produce a different playing order.

The Control Menu appears.

X/x to select 

The options for “SHUFFLE” appear.

X/x to select the item to be 

◆ When playing a DVD VIDEO
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• TRACK

T

– –

01
02
03
04
05

PROGRAM

1. TITLE  0 2 – 0 3

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

Selected title and chapter

PROGRAM

1. TRACK        0 2

ALL CLEAR

2. TRACK

– –

3. TRACK

– –

4. TRACK

– –

5. TRACK

– –

6. TRACK

– –

7. TRACK

– –

0:15:30

– –

01
02
03
04
05

T

Selected track

Total time of the programmed tracks

PLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

T

 1 : 3 2 : 5 5

OFF

CHAPTER

TITLE

OFF

DVD VIDEO

,continued

◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks 

selected in Programme Play.

Shuffle Play starts.

Press CLEAR, or select “OFF” in step 3.

z Hints
• You can set Shuffle Play while the player is 

stopped. After selecting the “SHUFFLE” option, 
press 

H. Shuffle Play starts.

• Up to 200 chapters in a disc can be played in 

random order when “CHAPTER” is selected.

You cannot use this function with VIDEO CDs or 
Super VCDs with PBC playback.

You can play all of the titles or tracks on a 
disc, or a single title, chapter, or track 
repeatedly.
You can use a combination of Shuffle or 
Programme Play modes.

The Control Menu appears.

X/x to select 

The options for “REPEAT” appear.

◆ When playing a DVD VIDEO
• DISC: repeats all of the titles.
• TITLE: repeats the current title on a 

disc.

• CHAPTER: repeats the current chapter.

◆ When playing a DVD-RW
• DISC: repeats all the titles of the 

selected type.

• TITLE: repeats the current title on a 

disc.

• CHAPTER: repeats the current chapter.
◆ When playing a VIDEO CD or CD
• DISC: repeats all of the tracks.
• TRACK: repeats the current track.
◆ When playing a DATA CD/DATA DVD
• DISC: repeats all of the albums.
• ALBUM: repeats the current album.
• TRACK (MP3 audio tracks only): 

repeats the current track.

• FILE (DivX video files only): repeats 

the current file.

◆ When Programme Play or Shuffle Play 
is activated
• ON: repeats Programme Play or Shuffle 

Play.

X/x to select a setting, and 

Press CLEAR, or select “OFF” in step 2.

z Hint
You can set Repeat Play while the player is stopped. 
After selecting the “REPEAT” option, press 

H.

Repeat Play starts.

• You cannot use this function with VIDEO CDs or 

Super VCDs with PBC playback.

• When repeating a DATA CD/DATA DVD which 

contains MP3 audio tracks and JPEG image files, 
and their playing times are not the same, the sound 
will not match the image.

• When “MODE (MP3, JPEG)” is set to “IMAGE 

(JPEG)” (page 54), you cannot select “TRACK.”

PLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

T

 1 : 3 2 : 5 5

OFF
OFF
DISC
TITLE
CHAPTER

DVD VIDEO

You can play a specific portion of a title, 
chapter or track repeatedly. (This function is 
useful when you want to memorize lyrics, 
etc.)

The Control Menu appears.

X/x to select 

The options for “A-B REPEAT” appear.

X/x to select “SET t,” then 

The “A-B REPEAT” setting bar appears.

The starting point (point A) is set.

The set points are displayed and the 
player starts repeating this specific 
portion.

Press CLEAR, or select “OFF” in step 3.

• When you set A-B Repeat Play, the settings for 

Shuffle Play, Repeat Play, and Programme Play 
are cancelled.

• A-B Repeat Play does not work across multiple 

titles.

• You  may not set A-B Repeat Play for contents on 

a DVD-RW (VR mode) that contains still 
pictures.

PLAY

SET
OFF

OFF

1 8 ( 3 4 )

1 2 ( 2 7 )

T

 1 : 3 2 : 5 5

DVD VIDEO

A 18 - 1:32:30

B

A 18 - 1:32:30

B 18 - 1:33:05

You can quickly locate a particular point on a 
disc by monitoring the picture or playing back 
slowly.

• Depending on the disc, you may not be able to do 

some of the operations described.

• For DATA CDs/DATA DVDs, you can search for 

a particular point only on MP3 audio track or 
DivX video file.

You can search for the next or previous 
chapter, track, or scene using 

./> on 

the player.
During playback, press 

> or . once 

briefly to go to the next or previous chapter/
track/scene. Or, press and hold 

> or .

to search forward or backwards, and release 
the button when you find the point you want 
to return to normal playback. (Search)

Press

m or M 

 while playing a 

disc. When you find the point you want, press 
H to return to normal speed. Each time you 
press

m or M 

 during scan, the 

scan speed changes. With each press the 
indication changes as shown below. Actual 
speeds may differ between discs.

Playback direction

Opposite direction

* DivX video only

The “

×2B”/ “×2b” playback speed is about 

twice the normal speed.
The “3

M”/“3m” playback speed is faster 

than “2

M”/“2m” and the “2M”/“2m”

playback speed is faster than “1

M”/

“1

m.”

(step)

(step)

×2B t 1M t 2M t 3M

3

M (DVD VIDEO/DVD-RW/VIDEO CD/DATA 

CD*/DATA DVD* only)

×2B (DVD VIDEO/CD only)

×2b t 1m t 2m t 3m

3

m (DVD VIDEO/DVD-RW/VIDEO CD/DATA 

CD*/DATA DVD* only)

×2b (DVD VIDEO only)