Sony DHC-NX5MD / HMC-NX5MD Service Manual ▷ View online
17
3-9. CHASSIS (MOLD B) SECTION, STOCKER SECTION AND
SLIDER (SELECTION)
Note: In mounting the parts, refer to page 18 and 19.
3-10. GEARS INSTALLATION
5
stocker
section
section
4
two step
screws
screws
4
two step screws
3
gear (eject)
2
chassis (mold B) section
Note: Rotating the pulley (LD),
shift the slider (selection)
to the left.
to the left.
9
compression
spring
spring
7
slider (selection)
8
washer
6
two screws
(PTPWH M2.6)
(PTPWH M2.6)
1
three screws
(BVTP M2.6)
(BVTP M2.6)
pulley (LD)
1
Slide the slider (U/D)
fully in the arrow
direction.
fully in the arrow
direction.
3
gear (gear B)
2
gear (U/D slider)
4
gear (gear A)
Adjust the gear (gear B) with the
portion A as shown.
portion A as shown.
Adjust the gear so that it meshes with
the bottom tooth of slider (U/D)gear,
as shown.
the bottom tooth of slider (U/D)gear,
as shown.
portion A
slider (U/D) gear
linearly
gear
(gear B)
(gear B)
Adjust so as to be aligned with
gear (B) linearly,as shown.
gear (B) linearly,as shown.
18
3-11. SLIDER (SELECTION) INSTALLATION
3-12. STOCKER SECTION INSTALLATION
portion A
2
gear (chuking)
6
two screws
(PTPWH M2.6)
(PTPWH M2.6)
5
washer
3
convex portion of
slider (selection)
slider (selection)
4
compression spring
7
Insert the slider (selection)
into the portion A.
into the portion A.
1
rotary encoder
rotary encoder
Align with the slot of
rotary encoder.
rotary encoder.
align marking
gear (chuking)
Insert a convex portion into
a groove of gear (chuking).
a groove of gear (chuking).
2
portion A of tray (sub)
1
stocker section
3
two step screws
3
two step screws
Hook the portion A of tray (sub)
to the slider (selection).
to the slider (selection).
potion A
of tray (sub)
of tray (sub)
sticking of
slider (selection)
slider (selection)
19
3-13. CHASSIS (MOLD B) SECTION INSTALLATION
3-14. MD MECHANISM DECK SECTION
(MDM-7B)
3
three screws
(BVTP M2.6)
(BVTP M2.6)
2
Insert the gear (eject)
under the gear (LD
deceleration).
under the gear (LD
deceleration).
1
Insert the portion A of
chassis (mold B) section
into the portion B of
slider (selection).
chassis (mold B) section
into the portion B of
slider (selection).
gear (LD deceleration)
portion A
portion B of
slider (selection)
slider (selection)
1
two screws
(BVTP 3
(BVTP 3
× 8)
2
screw
(BVTP 3
(BVTP 3
× 8)
3
cover (MD)
qa
two screws
(BVTPWH M3), step
(BVTPWH M3), step
0
two screws
(BVTPWH M3), step
(BVTPWH M3), step
qs
MD mechanism deck
(MDM-7B)
7
two claws
8
DIGITAL board
6
screw
(BVTP 3
(BVTP 3
× 8)
4
flat type wire (17core)
(CN1004)
5
flat type wire (27core)
(CN1003)
9
flat type wire (25core)
(CN1001)
A
A
20
3-15. BD (MD) BOARD
M102
M101
M103
S102
2
Remove the solder
(Two portions)
2
Remove the solder
(Two portions)
2
Remove the solder
(Two portions)
2
Remove the solder
(Three portions)
1
connector
(CN104)
(CN104)
6
connector
(CN101)
(CN101)
3
two screws
(BTP 2
(BTP 2
× 6)
4
BD (MD) board
5
Connect the short land
by lead wire.
short land
Bottom of the optical pick-up
CN101
Click on the first or last page to see other DHC-NX5MD / HMC-NX5MD service manuals if exist.