DOWNLOAD Sony CX-LFA660 / CX-LFA770 / XR-FA660 / XR-FA770 Service Manual ↓ Size: 5.85 MB | Pages: 56 in PDF or view online for FREE

13

4

2

3

two claws

5

tray (AU)

1

Move the Chuck cam in the direction of the arrow.

bottom side

4

 MS-128 board

1

 belt

2

 wire (flat type)

     (5core) (CN001)

3

 four claws

14

2

4

belt

5

claw

7

claw

1

two claws

3

base unit

   (BU-F1BD81A)

6

support

8

pulley gear

9

driving gear

15

Regarding the notification symbol “R”
Because the number of the operating buttons of this product
are limited, some operations require use of the operating
buttons of the remote commander. When a specific operation
requires use of the operating buttons of the remote commander,
“R” is added to the specific operating procedure in this manual.
Example  MENU/NO  “R”  The  MENU/NO  button of remote
commander.

Incorrect operations may be performed if the test mode is
not entered properly.
In this case, press the  ?/1  button to turn the power off, and
retry to enter the test mode.

•

The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customers.

1. Press three buttons x  ,  [VOLUME]  (down) and  ?/1

simultaneously.

2. When this button is operated, all of the settings are reset.

•

This mode is used to check the software version, LCD, LED
and keyboard.

1. Press three bottons [DISPLAY],  ?/1  and [VOLUME] (down)

simultaneously.

2. When the panel test mode is activated, all segments are turned

on.

1. When the panal test mode is activated, press the [BASS/

TREBLE] button and the version is displayed.

2. Press the [i-Bass] button and the date of the software production

is displayed.

3. Press the [BASS/TREBLE]  button again and the version is

displayed.

4. To exit from this mode, pull out the AC plug.

1. When the panel test mode is activated, press the [PLAY MODE]

button, to select the key test mode. In the key check mode, the
fluorecent indicator displays “KEY 0”. Each time a button is
pressed, “KEY” value increases. However, once a button is
pressed, it is no longer taken into account. When all keys are
pressed correctly, “KEY 19” is displayed.

2. To exit from this mode, pull out the AC plug.

1. Press the  ?/1  button to turn the power on.
2. When the common test mode is activated, each time press the

 EQ “R”  button, the message “EQ MAX”, “EQ MIN”, “EQ
FLAT” is displayed in this order.

3. The message “Volume MAX” is displayed, when press the

[VOLUME] (up) button or   VOLUME + “R”  button. The mes-
sage “Volume MIN” is displayed, when press the [VOLUME]
(down) button or  VOLUME – “R”  button.

4. To exit from this mode, press the ?/1 button to turn off the

main power.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  x  , [VOLUME] (down) and the [PLAY MODE]

simultaneously.

3. To exit from this mode, press the  ?/1  button.

The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure :

1. Press the  ?/1  button to turn the set on.
2. Insert a disc.
3. Press the  x  button and the  Z CD  button simultaneously for

five seconds.

4. The message “LOCKED” is displayed and the tray is locked.

1. Press the  x  button and the  Z CD  button simultaneously for

five seconds again.

2. The message “UNLOCKED” is displayed and the tray is

unlocked.

When “LOCKED” is displayed, the slot lock is not released by
turning power on/off with the  ?/1  button.

16

2.94 – 7.84 mN • m

(30 to 79 g • cm)

(0.42 – 1.11 oz • inch)

0.15 – 0.59 mN • m

(2 to 6 g • cm)

(0.03 – 0.08 oz • inch)

2.94 – 7.84 mN • m

(30 to 79 g • cm)

(0.42 – 1.11 oz • inch)

0.15 – 0.59 mN • m

(2 to 6 g • cm)

(0.03 – 0.08 oz • inch)

6.86 – 17.64 mN • m

(70 to 179 g • cm)

(0.98 – 2.49 oz • inch)

9.8 mN • m or more

(100 g • cm or more)

(1.4 oz • inch or more)

9.8 mN • m or more

(100 g • cm or more)

(1.4 oz • inch or more)

CQ-102C

CQ-102C

CQ-102RC

CQ-102RC

CQ-201B

CQ-403A

CQ-403R

1. Clean the following parts with a denatured alcohol-moistened

swab:

record/playback heads

pinch rollers

erase head

rubber belts

capstan

idlers

2. Demagnetize the record/playback head with a head demag-

netizer.

3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to

the parts adjusted.

5. The adjustments should be performed with the rated power

supply voltage unless otherwise noted.

FWD

FWD

back tension

REV

REV

back tension

FF/REW

FWD tension

REV tension