DOWNLOAD Sony CX-JT9 / JAX-PK9 Service Manual ↓ Size: 8.37 MB | Pages: 86 in PDF or view online for FREE

5

2

Turn the loading gear 
in the direction of arrow 

A

.

1

Remove the case (side-L).

A

3

Pull-out the disc tray.

6

main board (CN312)

Connect wire (flat type) (19 core) to
main board (CN312) and BD board (CN710).

BD board (CN710)

Connect wire (flat type) (13 core) to
panel board (CN601) and mechanical deck.

panel board (CN601)

main board (CN203)

7

This section is extracted from
instruction manual.

1

Rotates the CD trays.

2

6

Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.

3

Selects Tape function, and deck A or B.

Selects Tuner function and the radio band.

Selects the function of external equipment connected to
MD (VIDEO) jacks.

Selects CD function.

4

Enhances high or middle frequency sound.

5

Starts Automatic CD dubbing.

Starts recording.

6

Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.

Connects the microphone here.

Adjusts the microphone volume.

Refer to the pages indicated in parentheses for details.

7

Selects a disc.

8 z

Opens or closes the disc compartment.

9

Activates a graphic equalization curve.

0

Selects various modes (Play mode and Tape reverse, etc.)
when used in combination with ENTER and MULTI JOG.

Fixes the modes and the time (Play mode and Tape
reverse, etc.) when used in combination with MODE and
MULTI JOG.

!

CD: skips to a previous or a succeeding track.
Tuner: selects a preset station.
Clock and Timer: sets the time.
Selects the mode and the time when used in combination
with MODE and ENTER.

@

Adjusts the volume.

#

Adjusts low frequency sound.

Switches surround on and off.

Produces rich and clear low frequency sound.

$

Displays the time and the remaining time for CD.
When the unit is off, press DISPLAY to switch between
DEMO, Clock and ECO display modes.

k

i

Selects a previous album or a succeeding album with
MP3-CDs.

% r

t

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tapes: pauses playback.

d

CD and Tapes: starts playback.

s

CD and Tapes: stops playback.

Refer to the pages indicated in parentheses for details.

1

Ω

Plug in the supplied AM and FM antennas here.

2

Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press MD (VIDEO).

To change the displayed name for this function, turn the
unit on, then hold down MD (VIDEO) and press POWER
on the unit. Repeat the procedure to select “MD” or
“VIDEO”.

3

Connect for each speaker the blue cord to the 0 terminal
and the black cord to the 9 terminal.

Connect for each speaker the red cord to the 0 terminal
and the black cord to the 9 terminal.

4

5

Switches AC voltage among 120V, 220V, and 230V- 240V.
Make sure it matches your local voltage.

8

Buttons with the same or similar names with the main unit
basically have the same function.

1

2

Selects a CD track of the specified number.

The numbered buttons take on these functions below when pressed
together with SHIFT held down

:

Enters Automatic CD dubbing mode when pressed in
stop mode.

Selects Tuner function and the radio band.

Selects Tape function, and deck A or B.

Changes the spectrum analyzer display.

Switches between stereo or monaural FM reception.

Selects Vocal Fader mode.

Enters Graphic Equalizer setting mode.

Tuner: stores the received station in to preset.

Switches surround on and off.

3 r

t

CD: selects a track.
Tuner: selects a preset station.
BASS, MID and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

M

N

Selects a previous album or a succeeding album.

5

CD: selects a playback mode.
Tape: selects a reverse mode

Enters CD repeat playback mode.

6

Enters timer setting mode.

Selects timer playback, timer recording or timer off.

7

Displays the time and the remaining time for CD.
When the unit is off, press DISPLAY to switch between
DEMO, Clock and ECO display modes.

8

Hold down when pressing a numbered button to change
its function to that printed above the number.

e.g.)

“Press SHIFT+BAND on the remote” indicates “Hold
down SHIFT and press ‘2’ (BAND)”. Doing so makes you
be able to select Tuner function and the radio band.

Refer to the pages indicated in parentheses for details.

9

Switches the active function among CD, TAPE, TUNER
and MD (VIDEO).

0

Select a disc.

! c

d

CD and Tape: starts playback.

s

CD and Tape: stops playback.

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

@

Switches the sleep-timer on/off and selects the duration.

#

+

-

Adjusts the volume.

$

Selects BASS, MID or TREBLE setting mode

Clears a track of the CD programed playback.

Use the remote.

1 Pr ess CLOCK/TIMER/SET.

Go to step 3  when the time appears and the ‘hour’ 

flashes.

2 Press r  or t  

repeatedly until “

CLOCK

”

appears in the display and then press ENTER.

3 Press r  or t  repeatedly to set the hour

and then press ENTER.

4 Press r or t repeatedly to  set  the minute

and then press ENTER.

The time  display stops flashing and  the clock starts  from
00 seconds.

•MULTI JOG is also available in place of r

  or t

.

To display the time
Press DISPLAY .  

The time  will be displayed  for  6 seconds.

“

AM 12:00

” indicates midnight  and “

PM 12:00

” noon.

- -:- -

There has been a power interruption. Re-set the clock.