Sony CX-JN1 / JAX-N1 / JAX-PK1 Service Manual ▷ View online
5
CX-JN1
HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF.
3
Pull-out the disc tray.
1
Remove the case (side-L).
2
Turn the loading gear in the direction of arrow
A
.
A
6
CX-JN1
SERVICE POSITION
– CD mechanism deck –
– CD mechanism deck –
– Tape mechanism deck –
main board (CN691)
Connect wire (flat type) (19 core) to
main board (CN691) and BD board (CN710).
main board (CN691) and BD board (CN710).
BD board (CN710)
BD board (CN710)
Connect wire (flat type) (13 core) to
panel board (CN601) and mechanical deck.
panel board (CN601) and mechanical deck.
panel board (CN601)
main board (CN301)
7
CX-JN1
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
En
1
DISC CHANGE
Rotates the CD trays.
2
POWER
6
STANDBY/ON
Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.
The red indicator flashes when receiving a signal from
the remote.
3
MODE
Selects various modes (ECO and Repeat/Shuffle/
Programmed playback, etc.) when used in combination
with ENTER and MULTI JOG.
Programmed playback, etc.) when used in combination
with ENTER and MULTI JOG.
4
ENTER
Fixes the modes and the time (ECO, Repeat/Shuffle/
Programmed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
Programmed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
!
Remote sensor
Receives a signal from the remote.
@
VOLUME
Adjusts the volume.
#
TREBLE
Enhances high frequency sound.
$
BASS
Emphasizes low frequency sound.
%
i-Bass
Produces rich and clear low frequency sound.
^
PTY (AEP, UK)
Displays a program type for RDS (Radio Data System)
RT (AEP, UK)
Displays text information for RDS (Radio Data System)
& c
PLAY/PRESET
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
s
STOP/CLEAR
CD and Tape: stops playback.
Tuner: clears a station preset.
Tuner: clears a station preset.
f
TUNING DOWN,
g
TUNING UP
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
PAUSE/SET
CD and Tape: pauses playback.
Tuner: stores the received station in to preset.
Tuner: stores the received station in to preset.
Main unit: front
5
MULTI JOG
When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programmed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.
CD: selects a track and Repeat/Shuffle/Programmed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.
6
PHONES jack
Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.
stereo plug (ø3.5 mm). Speaker output is canceled.
7
SYNC DUB
Starts dubbing a whole tape.
w
REC/REC MUTING
Starts recording.
8
DISC DIRECT PLAY 1-3
Selects a disc.
9 z
OPEN/CLOSE
Opens or closes the disc compartment.
0
TAPE A/B
Selects Tape function, and deck A or B.
TUNER/BAND
Selects Tuner function and the radio band.
VIDEO/AUX
Selects the function of external equipment connected to
VIDEO/AUX jacks.
VIDEO/AUX jacks.
CD
Selects CD function.
*
MIC MIXING (Except AEP, UK, CIS)
Adjusts the microphone volume.
MIC jack (Except AEP, UK, CIS)
Connects the microphone here.
Main unit: rear
1
AM LOOP, FM 75
Ω
terminals
Plug in the supplied AM and FM antennas here.
2
VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "
VIDEO
",
"
AUX
" or "
TV
".
3 #
SPEAKER terminals
Connect the speaker cord of the supplied front speakers
here.
here.
4
AC voltage selector (E, Chilean, Peruvian, Saudi Arabia, Singapore, Taiwan)
Switches AC voltage between 110 - 120V and 220 - 240V.
Make sure it matches your local voltage.
Make sure it matches your local voltage.
5
AC power cord
• LOCATION OF CONTROLS
Ver 1.2
8
CX-JN1
Buttons with the same or similar names with the main unit
basically have the same function.
basically have the same function.
1
POWER
2
1-0/10, +10
CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.
Tuner: tunes in to the station with the specified preset
number.
The numbered buttons take on these functions below when pressed
with SHIFT held down:
with SHIFT held down:
EDIT
Enters AI Edit Recording or Programmed Edit Recording
mode when pressed in stop mode.
mode when pressed in stop mode.
BAND
Selects Tuner function and the radio band.
TAPE A/B
TUNER MODE
Switches between stereo or monaural FM reception.
3 r
,
t
CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.
4
PLAY MODE
Selects Shuffle or Programmed playback in CD function.
REPEAT
Enters CD repeat playback mode.
ENTER
5
CLOCK/TIMER/SET
Enters timer setting mode.
CLOCK/TIMER/SELECT
Selects timer playback, timer recording or timer off.
6
DISPLAY
Displays the time and the remaining time for CD.
7
SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
8
FUNCTION
Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).
and VIDEO (AUX or TV).
9
DISC SKIP
Select a disc.
0 c
/
d
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
DEMO.
CD and Tape: starts playback.
s
CD and Tape: stops playback.
f
,
g
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
CD and Tape: pauses playback.
!
SLEEP
Switches the sleep-timer on/off and selects the duration.
@
VOLUME (
+
,
-
)
Adjusts the volume.
#
SOUND
Selects BASS or TREBLE setting mode
CLEAR
Clears a track of the CD programmed playback and a
Radio preset station.
Radio preset station.
Note
The
The button not explained above (
KARAOKE
) does not
operate for AEP, UK and CIS models.
buttons not explained above (
ALBUM
N, M
and
SPECTRUM
) do not operate for this unit.
Remote control
KARAOKE (Except AEP, UK, CIS)
Selects a Multiplex mode.
Setting the clock
Use the remote.
1 Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.
2 Press r or t repeatedly until "
CLOCK
SET
" appears in the display and then press
ENTER.
3 Press r or t repeatedly to set the hour
and then press ENTER.
4 Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
The time display stops flashing and the clock starts from
00 seconds.
•MULTI JOG is also available in place of r or t.
To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.
Press DISPLAY on the remote. The time will be displayed for
6 seconds.
If "
- -:- -
" appears when the unit is turned off
There has been a power interruption. Re-set the clock.
Ver 1.1
Click on the first or last page to see other CX-JN1 / JAX-N1 / JAX-PK1 service manuals if exist.