Sony CMT-Z100DIR / CMT-Z100IR Service Manual ▷ View online
CMT-Z100DiR/Z100iR
9
2-6. MAIN BOARD
Note: This illustration sees the set from rear side.
CAUTION
The number and the width of the pins are the
same as CN811 and CN860.
Take care not to insert the flexible flat cable
(7 core) by mistake.
same as CN811 and CN860.
Take care not to insert the flexible flat cable
(7 core) by mistake.
CN860
MAIN board
CN811
1 connector
(CN601)
2 flexible flat cable
(13 core) (CN861)
3 six screws (BVTP3 u 8)
4 harness
3 screw (BVTP3 u 8)
5 flexible flat cable
(7 core) (CN860)
6 screw
(BVTP2.6)
7 heat sink (AMP)
8 radiation sheet
qa MAIN board
9 connector
(CN02)
(Z100iR: E2)
0 SW-VOLT board
• Abbreviation
E2
E2
: Colombian, Venezuelan and
Puerto Rican models
CMT-Z100DiR/Z100iR
10
2-7. CD MECHANISM DECK (CDM86 ASSY)
Note: This illustration sees the set from rear side.
CAUTION
5 Lift up the FFC holder.
flexible flat cable
4 two claws
6 Be sure to execute a solder bridge as a measure against
static electricity when removing the OP block or
DMB19C-32NUA
board.
(Otherwise, the OP block will be destroyed.)
1 flexible flat cable (7 core)
(CN001)
2 connector
(CN201)
3 three screws (BVTP3 u 8)
7 wire (flat type) (24 core)
(CN101)
8 two screws (BVTP2.6)
9 panel (slot) block
0 CD mechanism deck
(CDM86
assy)
CMT-Z100DiR/Z100iR
11
2-8. OPTICAL PICK-UP BLOCK (KHM-313CAB)
2-9. DISPLAY BLOCK
Note:
This illustration sees the set from rear side.
4 two insulator screws
4 two insulator screws
5 two insulators
6 wire
5 two insulators
7 optical pick-up block
(KHM-313CAB)
1 two claws
2 FFC holder
3 wire (flat type) (24 core)
3 eight screws (BVTP2.6)
2 ferrite core
1 cushion (ferrite)
4 display block
CMT-Z100DiR/Z100iR
12
2-10. HP BOARD, TUNER (FM/AM)
Note: This illustration sees the set from rear side.
2-11. SPEAKER BOX (L/R) BLOCK
Note: This illustration sees the set from rear side.
2 screw (BVTP3 u 10)
1 connector
(CN350)
(Z100DiR)
3 HP board
6 cushion (FFC5P)
4 connector
5 screw (BVTP3 u 10)
8 two screws (BVTP3 u 10)
9 bracket (antenna) block
qa tuner (FM/AM)
0 cushion (tuner)
0 two cushions (tuner)
7 flexible flat cable (9 core) (Z100iR: E2)/
flexible flat cable (11 core) (Z100DiR/Z100iR: AEP)
1 screw
(BVTP3
u 10)
5 SW-VOLT board
Arrangement of power cord
power cord
ferrite core
2 CORD HOLDER
board
3 power cord (with ferrite core)
4 two screws
(BVTP3
u 10)
(Z100iR: E2)
A
B
A
B
6 two speaker connectors
(CN390,
CN391)
7 two cushions (ferrite)
8 clamp filter
9 speaker box (L) block
9 speaker box (R) block
• Abbreviation
E2
E2
: Colombian, Venezuelan and
Puerto Rican models
• Abbreviation
E2
E2
: Colombian, Venezuelan and
Puerto Rican models
Ver. 1.1
Click on the first or last page to see other CMT-Z100DIR / CMT-Z100IR service manuals if exist.