Sony CMT-Z100DIR / CMT-Z100IR Service Manual ▷ View online
CMT-Z100DiR/Z100iR
5
MAIN BOARD SERVICE POSITION
• In checking the MAIN board, prepare extension jig (Part No. J-2501-102-A: 1.00 mm pitch, 13 cores, length 300 mm).
• In checking the MAIN board, prepare extension jig (Part No. J-2501-102-A: 1.00 mm pitch, 13 cores, length 300 mm).
Note: Pleaese connect it after taking out MAIN board, DMB19C-32NUA board and CD mechanism block of the set referring to Section 2 Disassembly
(page 6)
MAIN board
DMB19C-32NUA board
CD mechanism block
Connect extension jig (J-2501-102-A) to
the MAIN board (CN861) and
DMB19C-32NUA board (CN109).
the MAIN board (CN861) and
DMB19C-32NUA board (CN109).
HP board
CMT-Z100DiR/Z100iR
6
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
2-2. PANEL (BACK) BLOCK
Note:
This illustration sees the set from rear side.
2-2. PANEL (BACK) BLOCK
(Page
(Page
6)
2-3. PLATE (BACK) BLOCK
(Page
(Page
7)
2-4. DAB BOARD (Z100DiR)
(Page
(Page
7)
2-10. HP BOARD, TUNER (FM/AM)
(Page
(Page
12)
2-11. SPEAKER BOX (L/R) BLOCK
(Page
(Page
12)
2-5. CHASSIS
BLOCK
(Page
8)
2-6. MAIN
BOARD
(Page
9)
2-7. CD MECHANISM DECK (CDM86 ASSY)
(Page
(Page
10)
2-9. DISPLAY
BLOCK
(Page
11)
SET
2-8. OPTICAL PICK-UP BLOCK (KHM-313CAB)
(Page
(Page
11)
1 screw (BVTP3 u 10)
3 two screws (B4 u 10)
2 lid (cord) block
4 panel (stand) block
5 three screws (BVTP3 u 10)
5 three screws
(BVTP3
u 10)
5 two screws
(BVTP3
u 10)
5 three screws (BVTP3 u 10)
5 three screws (BVTP3 u 10)
6 panel (back) block
CMT-Z100DiR/Z100iR
7
2-3. PLATE (BACK) BLOCK
Note:
This illustration sees the set from rear side.
2-4. DAB BOARD (Z100DiR)
Note:
This illustration sees the set from rear side.
1 screw (BVTP3 u 10)
2 coating clip
1 ten screws (BVTP3 u 10)
1 two screws (BVTP3 u 10)
1 two screws (BVTP3 u 10)
1 six screws (BVTP3 u 10)
3 plate (back) block
3 two screws (BVTP3 u 10)
9 DAB board
CAUTION
The number and the width of the pins are the
same as CN840 and CN850.
Take care not to insert the flexible flat cable
(11 core) by mistake.
same as CN840 and CN850.
Take care not to insert the flexible flat cable
(11 core) by mistake.
CN840
MAIN board
CN850
1 flexible flat cable (11 core)
(CN850)
4 screw
(BVTP2.6)
5 module (DAB tuner)
6 two screws
(BVTP2.6)
7 bracket (DAB)
8 flexible flat cable (11 core)
(CN801)
2 connector
CMT-Z100DiR/Z100iR
8
2-5. CHASSIS BLOCK
Note:
This illustration sees the set from rear side.
qs five screws
(BVTP3
u 8)
1 Cut the wire holder.
2 power cord connector
(CN01)
3 connector
(CN820)
4 two speaker connectors
(CN390,
CN391)
7 connector
(CN880)
8 flexible flat cable (11 core)
(CN870)
9 connector
(CN880)
0 flexible flat cable (7 core)
(CN811)
qa flexible flat cable (9 core)
(CN810)
qd chassis block
5 connector
(CN350)
6 flexible flat cable (9 core)
(CN830) (Z100iR: E2)/
flexible flat cable (11 core)
(CN840)
(Z100DiR/Z100iR:
AEP)
CAUTION
The number and the width of the pins are the
same as CN840 (Z100DiR/Z100iR: AEP) and
CN850.
Take care not to insert the flexible flat cable
(11 core) (Z100DiR/Z100iR: AEP) by mistake.
same as CN840 (Z100DiR/Z100iR: AEP) and
CN850.
Take care not to insert the flexible flat cable
(11 core) (Z100DiR/Z100iR: AEP) by mistake.
CN840 (Z100DiR/Z100iR: AEP)
MAIN board
CN850
• Abbreviation
E2
E2
: Colombian, Venezuelan and
Puerto Rican models
Click on the first or last page to see other CMT-Z100DIR / CMT-Z100IR service manuals if exist.