Sony CMT-VP11 / HCD-VP11 Service Manual ▷ View online
5
This section is extracted from
instruction manual.
instruction manual.
Step 2: Setting the time
Before you can use the system’s timer functions,
set the internal clock.
set the internal clock.
+
–
–
#
2
N
X
x
nN
.
>
z
m
M
y
1
2,4
3,5
1
Press TIMER SET.
The hour indication flashes.
AM1200
2
Press +/– repeatedly to set the hour.
AM1100
3
Press ENTER.
The minute indication flashes.
AM1100
4
Press +/– repeatedly to set the minute.
AM1110
5
Press ENTER.
The clock will begin operating.
To reset the system clock
You can reset the system clock even when the
system is on or off. To reset the time while the
system is on, do the following:
system is on or off. To reset the time while the
system is on, do the following:
1 Press TIMER SET.
2 Press +/– repeatedly until “SET CLOCK”
2 Press +/– repeatedly until “SET CLOCK”
appears, then press ENTER.
3 Repeat steps 2 to 5 in “Step 2: Setting the
time”.
Tip
If you make a mistake, start over from step 1.
6
3-1. COVER (UPPER)
3-2. TAPE MECHANISM DECK
Note:
Follow the disassembly procedure in the numerical order given.
SECTION 3
DISASSEMBLY
1
Two screws
(case3 TP2)
(case3 TP2)
4
Cover (upper)
2
Four screws
(BTP3
(BTP3
×
8)
3
Two screws
(case3 TP2)
(case3 TP2)
2
Connector
5
Tape
mechanism deck
mechanism deck
1
Flat wire (12 core)
3
Two screws
(BTP3
(BTP3
×
8)
4
Two screws
(BTP3
(BTP3
×
8)
7
3-3. FRONT PANEL SECTION
1
Connector
(CN303)
(CN303)
3
Connector
2
Flat wire
Two claws
6
Screw
(KTP3
(KTP3
×
6)
7
Front panel section
(There is a claw.)
5
Two screws
(BTP3
(BTP3
×
8)
4
Screw
(TP3
(TP3
×
6)
8
3-4. CD MECHANISM DECK
3
Screw
(BTP3
(BTP3
×
8)
2
flat wire (19 core)
(CN805)
(CN805)
1
connector
4
CD mechanism deck
3-5. UPPER CHASSIS
1
Screw
2
Upper chassis
Click on the first or last page to see other CMT-VP11 / HCD-VP11 service manuals if exist.