Sony CMT-EH55DAB / HCD-EH55DAB Service Manual ▷ View online
HCD-EH55DAB
5
Information on the display
Timer
R
DAB service reception
Lights up when secondary service is
received.
received.
Label indication
Text information
Play mode
DSGX
Tuner reception mode
Tuner reception
Tuner reception
Audio format
Play/Pause
DAB
Lights up when the DAB function is
selected.
selected.
Getting Started
Hooking up the system securely
FM/DAB lead antenna (Extend it horizontally.)
Speaker cord (Black/)
Speaker cord (Red/)
Left speaker
Wall socket
Right speaker
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
Speakers
Insert only the stripped portion of the
speaker cords into the SPEAKER jacks.
speaker cords into the SPEAKER jacks.
Power
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
To use the remote
Slide and remove the battery
compartment lid
compartment lid
RM, and insert the two
R6 (size AA) batteries (not supplied),
below.
side first, matching the polarities shown
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
To run the DAB Automatic Scan
Automatic Scan starts automatically and
When you turn on the system for the first
time after you purchase the system, DAB
time after you purchase the system, DAB
creates a list of available services. If you
want to run the DAB Automatic Scan
again, perform the procedure below.
want to run the DAB Automatic Scan
again, perform the procedure below.
1
Press DAB AUTO SCAN on the
unit.
“DAB SCAN” and “PUSH DAB”
appear.
unit.
“DAB SCAN” and “PUSH DAB”
appear.
2
Press DAB on the unit.
progress is indicated by advancing
Scanning begins. The scanning
asterisks. Depending on the DAB
services available in your area,
scanning may take a few minutes.
services available in your area,
scanning may take a few minutes.
When scanning is complete, a list of
available services is created.
available services is created.
Notes
If your country or region does not support
DAB broadcast, “NO SERV” appears.
Do not press any button on the unit or
the remote during DAB Automatic Scan.
If scanning is interrupted, run the DAB
Automatic Scan again.
If you move to another area, repeat this
procedure to store the stations for your new
area.
DAB broadcast, “NO SERV” appears.
Do not press any button on the unit or
the remote during DAB Automatic Scan.
If scanning is interrupted, run the DAB
Automatic Scan again.
If you move to another area, repeat this
procedure to store the stations for your new
area.
presets.
This procedure clears all previously stored
Before unplugging the DAB antenna, make
sure the system is turned off to preserve your
own DAB settings.
This tuner does not support data services.
sure the system is turned off to preserve your
own DAB settings.
This tuner does not support data services.
Setting the clock
Use buttons on the remote to set the
clock.
clock.
1
Press / to turn on the
system.
system.
2
Press CLOCK/TIMER SET RH.
display.
If “PLAY SET” Flashes in the display,
If “PLAY SET” Flashes in the display,
The hour indication flashes in the
press
/
repeatedly to
select “CLOCK” and then press
ENTER
ENTER
.
3
Press /
repeatedly
to set the hour, and then press
ENTER
ENTER
.
4
Use the same procedure to set
the minutes.
the minutes.
disconnect the power cord or if a
The clock settings are lost when you
power failure occurs.
To display the clock when the system
is off
is off
Press DISPLAY
. The clock is
displayed for about 8 seconds.
RI
RK
XE
v
v
v
v
v
v
v
v
v
HCD-EH55DAB
6
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
3-2. REAR CABINET BLOCK
3-2. REAR
CABINET
BLOCK
(Page
6)
SET
3-3. FRONT CABINET BLOCK,
TOP CABINET BLOCK,
MAIN
BOARD
(Page
7)
3-4. MF-EH10 (TAPE MECHANISM DECK),
CASSETTE
CASSETTE
LID
(Page
7)
3-5. BASE UNIT BLOCK
(BU-K8BD90-WOD)
(Page
(BU-K8BD90-WOD)
(Page
8)
3-6. OPTICAL PICK-UP BLOCK
(KSM-213CDP)
(Page
(KSM-213CDP)
(Page
8)
two screws
(BVTP3
× 10)
screw
(KTP2
3
× 8)
screw
(KTP2
3
× 8)
connector
(CN002)
Return the bend of a coating clip.
connector
(CN103)
rear cabinet block
two screws
(BVTP3
× 10)
two screws
(BVTP3
× 10)
HCD-EH55DAB
7
3-3. FRONT CABINET BLOCK, TOP CABINET BLOCK, MAIN BOARD
3-4. MF-EH10 (TAPE MECHANISM DECK), CASSETTE LID
slide switch (REC/PB) (SW501)
REC lever
2.3
± 0.4 mm
two screws
(BVTP2.6)
flexible flat cable (5 core) (FFC001)
(CN103)
flexible flat cable (23 core)
(FFC002) (CN105)
flexible flat cable (21 core)
(FFC003)
(CN201)
connector
(SW750)
two connectors
(CNP501,
CNP502)
claw
Note: Adjust so that the space of slide switch (REC/PB) (SW501)
REC lever becames 2.3
± 0.4 mm.
claw
claw
claw
R top cabinet block
RG MAIN board
front cabinet block
claw
RB connector
(CN104)
RT connector
(CN602)
(CN602)
RE module
(DAB
(DAB
tuner)
two screws
(BVTP2.6)
screw
lever (REC)
RG cassette lid
R two screws
RB cable holder
coating clip
RE two claws
RT MF-EH10
(tape mechanism deck)
PWB holder
two screws
(BVTP2.6)
Open the button cover (C).
Push the eject button.
screw
(BVTP2.6)
Note: When removing cassette lid,
it's possible to remove cassette
lid by the order of RE RG.
HCD-EH55DAB
8
3-5. BASE UNIT BLOCK (BU-K8BD90-WOD)
Note: This illustration sees the top cabinet block back side from back.
3-6. OPTICAL PICK-UP BLOCK (KSM-213CDP)
top cabinet block
four screws
(PWH
B2.6)
coating clip
two vibration proof rubbers
(red)
two vibration proof rubbers
(green)
four claws
CD cover
base unit block
(BU-K8BD90-WOD)
– Bottom view –
wire (flat type) (16 core)
(optical pick-up, CD board: CN301)
CD board
optical pick-up block
(KSM-213CDP)
Remove the four solders.
Click on the first or last page to see other CMT-EH55DAB / HCD-EH55DAB service manuals if exist.