Sony CFD-922L (serv.man2) Service Manual ▷ View online
– 5 –
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Reinforcing the bass sound
Press MEGA BASS.
"MEGA BASS" appears in the display.
To return to normal sound, press the button again.
Tape compartment
MEGA BASS
Z
PUSH OPEN/CLOSE
CD compartment
VOLUME +,–
TUNING –, +
.
,
>
DISPLAY ENT
MEMORY
MEMORY
PLAY MODE
MONO/ST*
MONO/ST*
Location of contr ols
i
(headphones) jack
Number buttons for
CD/RADIO DIRECT OPERATION
CD/RADIO DIRECT OPERATION
x
u
OPERATE
(or POWER)
(or POWER)
SLEEP
CD
RADIO BAND
AUTO PRESET
AUTO PRESET
Tip
To listen through headphones, connect the headphones to the
i (headphones) jack.
i (headphones) jack.
TONE
(CFD-S32/S32L only)
(CFD-S32/S32L only)
OPR/BATT
indicator
indicator
* The name of this button is PLAY MODE•MONO/ST for CFD-S22/S32,
PLAY MODE•MONO/ST ISS for CFD-S22L/S32L/922L.
TAPE
Adjusting the sound emphasis (MEGA BASS/TONE)
– 6 –
1
Press CD (direct power-on).
3
Close the CD compartment.
4
Press u (N on the remote, CFD-S32/S32L only).
The player plays all the tracks once.
The player plays all the tracks once.
Track number Playing time
To
adjust the volume
stop playback
pause playback
go to the next track
go back to the previous track
remove the CD
turn on/off the player
c
Playing a CD
Press
VOLUME +, – (VOL +, – on the remote,
CFD-S32/S32L only)
CFD-S32/S32L only)
x
u (X on the remote, CFD-S32/S32L only)
Press the button again to resume play after
pause.
Press the button again to resume play after
pause.
>
.
Z PUSH OPEN/CLOSE
OPERATE (or POWER)
1
Press RADIO BAND•AUTO PRESET
until the band you
want appears in the display (direct power-on).
Each time you press the button, the indication changes as
follows:
CFD-S22/S32: “FM1” t “FM2” t “AM”
CFD-S22L/S32L/922L:
Each time you press the button, the indication changes as
follows:
CFD-S22/S32: “FM1” t “FM2” t “AM”
CFD-S22L/S32L/922L:
“FM1” t “FM2” t “MW” t
“LW”.
2
Hold down TUNING + or – (TUNE + or – on the remote,
CFD-S32/S32L only) until the frequency digits begin to
change in the display.
CFD-S32/S32L only) until the frequency digits begin to
change in the display.
The player automatically scans the radio frequencies and
stops when it finds a clear station.
If you can't tune in a station, press the button repeatedly
to change the frequency step by step.
stops when it finds a clear station.
If you can't tune in a station, press the button repeatedly
to change the frequency step by step.
To
adjust the volume
turn on/off the radio
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for AM or
MW/LW.
FM
AM/MW/LW
Tips
• The "FM1" and "FM2" bands have the same functions. You can store the
stations you want separately in "FM1" and "FM2".
• If the FM broadcast is noisy, press PLAY MODE•MONO/ST until
"Mono" appears in the display and the radio will play in monaural.
Listening to the radio
Press
VOLUME +, – (VOL +, – on the remote,
CFD-S32/S32L only)
CFD-S32/S32L only)
OPERATE (or POWER)
Display
Display
2
Press Z PUSH OPEN/CLOSE down to open the CD
compartment and place a CD in the CD compartment.
compartment and place a CD in the CD compartment.
With the labeled side up
c
Display
– 7 –
1
Press TAPE (direct power-on).
2
Press xZ to open the tape compartment and insert a
recorded tape. Close the compartment.
recorded tape. Close the compartment.
3
Press N.
With the side you want to
play facing upward
play facing upward
2
Select the program source you want to record.
To record from the CD player
Press CD and insert a CD (See "Playing a CD").
To record from the radio
Press RADIO BAND•AUTO PRESET
and tune in
the
station you want (See "Listening to the radio").
3
Press z to start recording.
(N is depressed automatically.)
(N is depressed automatically.)
1
Press xZ to open the tape compartment and insert a
blank tape.
blank tape.
With the side you want to
record on facing upward
record on facing upward
To
Press
stop recording
xZ
pause recording
X
Press the button again to resume recording.
turn on/off the player
OPERATE (or POWER)
Tips
• Adjusting the volume or the audio emphasis will not affect the
recording level.
• CFD-S22L/S32L/922L only:
If
the
MW/LW program makes a
whistling sound after you've pressed z in step 3, press PLAY MODE•
MONO/ST ISS
MONO/ST ISS
(Interference Suppress Switch) repeatedly until the
noise is at a minimum.
• For the best results, use the AC power as a power source for recording.
• To erase a recording, proceed as follows:
• To erase a recording, proceed as follows:
1 Insert a tape with the recording you want to erase.
2 Press TAPE.
3 Press z.
2 Press TAPE.
3 Press z.
To
adjust the volume
stop playback
fast-forward or rewind the tape
pause playback
eject the cassette
turn on/off the player
Notes on cassettes
• Break off the cassette tab from side A or B to prevent accidental
recording. If you want to reuse the tape for recording, cover the broken
tab with adhesive tape.
tab with adhesive tape.
• The use of a cassette with more than 90 minutes of play time is not
recommended except for long, continuous recording or playback.
Tab for side B
Tab for side A
Side A
c
c
Use TYPE I (normal) tape only.
Press
VOLUME +, – (VOL +, – on the
remote, CFD-S32/S32L only)
remote, CFD-S32/S32L only)
xZ
M or m
X
Press the button again to resume play
after pause.
after pause.
xZ
OPERATE (or POWER)
Display
Display
Display
Use TYPE I (normal) tape only.
Playing a tape
Recording
– 8 –
Set
Cabinet
(Front)
Sub Assy
(Front)
Sub Assy
Wires
MD
Block
Assy
Block
Assy
Main
Board
Board
CD
Block
Assy
Block
Assy
Holder Assy,
Cassette
Cassette
PRE
Board
Board
“Head, Magnetic”,
Head (Erase),
Belt,
M301
(Capstan/Reel Motor)
Head (Erase),
Belt,
M301
(Capstan/Reel Motor)
Cabinet
(Upper)
Assy
(Upper)
Assy
Secondary Board,
Power Board
Power Board
Tuner
Board
Board
• The equipment can be removed using the following procedure.
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
1
lid, battery case
3
BVTP 3x10
2
BVTP 3x10
5
BVTP 3x12
6
BVTP 3x12
4
BVTP 3x10
lid (CD)
7
CNP323
8
CNP501
9
cabinet (front) sub assy
3-1. CABINET (FRONT) SUB ASSY
Click on the first or last page to see other CFD-922L (serv.man2) service manuals if exist.