Sony CDP-S3 / MHC-S3 Service Manual ▷ View online
CDP-S3
7
3-3.
CD MECHANISM DECK (CDM63B-30BD60)
Note:
Follow the disassembly procedure in the numerical order given.
3-2.
COVER
1
two screws
(case 3 TP2)
(case 3 TP2)
3
cover
2
screw
(BVTT3
(BVTT3
×
6)
1
two screws
(case 3 TP2)
(case 3 TP2)
3
four screws
(BVTP3
(BVTP3
×
8)
1
wire (flat type) (21 core)
(CN301)
(CN301)
2
connector
(CN701)
(CN701)
4
CD mechanism deck
(CDM63B-30BD60)
(CDM63B-30BD60)
CDP-S3
8
3-4.
MAIN BOARD
3-5.
FRONT PANEL SECTION
2
connector
(CN401)
(CN401)
1
wire (flat type) (21 core)
(CN301)
(CN301)
2
two connectors
(CN101, 102)
(CN101, 102)
5
MAIN board
3
screw
(BVTP3
(BVTP3
×
8)
4
lug
3
screw
(BVTP3
(BVTP3
×
8)
2
connector
(CN701)
(CN701)
3
two screws
(BVTP3
(BVTP3
×
8)
2
three screws
(BVTP3
(BVTP3
×
8)
3
two claws
1
connector
(CN401)
(CN401)
4
front panel section
3
claw
CDP-S3
9
3-6.
PANEL (L) BOARD, PANEL (R) BOARD
3-7.
LID (CD)
5
two claws
4
four screws
(BVTP2.6
(BVTP2.6
×
8)
6
PANEL (R) board
1
five screws
(BVTP2.6
(BVTP2.6
×
8)
3
PANEL (L) board
2
two claws
3
lid (CD)
4
spring (CD)
1
screw
(BVTP2.6
(BVTP2.6
×
8)
2
bracket (LID) assy
10
CDP-S3
SECTION 4
TEST MODE
Note:
Use flowing buttons in the test mode.
no mark : Button of CD unit (CDP-S3)
*1
: Button of amplifier unit (TA-S7AV or TA-S3)
*2
: Button of tuner unit (ST-S5 or ST-S3)
[CD Delivery Mode]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
after repair.
Procedure:
1. Press the
1. Press the
I
/
1
*
1
button to turn the power on.
2. Turn the
[FILE SELECT]
*
1
knob to set the CD function.
3. While pressing the
[EQ ON/OFF]
*
1
button, press the
I
/
1
*
1
button.
4. The message “LOCK” is displayed on the fluorescent indica-
tor tube of tuner unit and turn the power off automatically, and
the CD delivery mode is set.
the CD delivery mode is set.
[GC Test Mode]
Enter the GC Test Mode
Enter the GC Test Mode
Procedure 1:
1. Press the
1. Press the
I
/
1
*
1
button to turn the power on.
2. While pressing the both
[PLAY MODE]
and
[ ]
buttons, press
the
[ ]
(DISC 1) button.
3. LEDs and fluorescent indicator tube are all turned on of all
units.
Procedure 2:
1. Press the
1. Press the
I
/
1
*
1
button to turn the power on.
2. While pressing the both
[STEREO/MONO]
*
2
and
[CINEMA STUDIO C]
*
1
buttons, press the
[CLOCK/TIMER]
*
2
button.
3. LEDs and fluorescent indicator tube are all turned on of all
units.
Version Display Mode
Procedure:
1. Enter the GC test mode.
2. Each time the
1. Enter the GC test mode.
2. Each time the
[DISC 1]
or
[TUNER MEMORY]
*
2
button is
pressed, microcomputer or mechanism deck version is dis-
played of each unit.
played of each unit.
3. Press the
[DISC 3]
or
[TUNING +]
*
2
button to detail is dis-
played the version.
Key Check Mode
Procedure:
1. Enter the GC test mode.
2. Press the
1. Enter the GC test mode.
2. Press the
[DISC 2]
or
[TUNING --]
*
2
button to set the key
check mode, and displays “K 0 J 0 V 0” on the fluorescent
indicator tube of tuner unit.
indicator tube of tuner unit.
3. All buttons are pressed of CD unit, all LEDs are blinking of
CD unit. (not change the display of fluorescent indicator tube)
Releasing the GC Test Mode
To release from this mode, press three buttons in the same manner
as entering this mode or disconnect the power cord.
as entering this mode or disconnect the power cord.
x
Z
[CD Service Mode]
• This mode can run the CD sled motor optionally. Use this mode,
for instance, when cleaning the optical pick-up.
Procedure:
1. Press the
1. Press the
I
/
1
*
1
button to turn the power on.
2. Turn the
[FILE SELECT]
*
1
knob to set the CD function.
3. While pressing the both
[PLAY MODE]
and
[ ]
buttons, press
the
[ ]
button.
4. Set to the CD service mode.
5. With the CD in stop status, press the
5. With the CD in stop status, press the
[ ]
button to move the
optical pick-up to outside track, or press the
[ ]
button to
inside track.
6. To release from this mode, perform as follows.
1) Move the optical pick-up to the most inside track.
2) Disconnect the power cord.
2) Disconnect the power cord.
Notes:
• Always move the optical pick-up to most inside track when
releasing from this mode. Otherwise, a disc will not be un-
loaded.
loaded.
• Do not run the sled motor excessively, otherwise the gear can
be chipped.
[CD Cancellation Mode of Repeat Limitation]
• This mode can cancel the CD repeat limitation (5 times).
Procedure:
1. Press the
Procedure:
1. Press the
I
/
1
*
1
button to turn the power on.
2. Turn the
[FILE SELECT]
*
1
knob to set the CD function.
3. While pressing the both
[PLAY MODE]
and
[ ]
buttons, press
the
[REPEAT]
button.
4. CD repeat limitation is canceled.
5. To release this mode, disconnect the power cord.
5. To release this mode, disconnect the power cord.
x
.
M
m
x
Click on the first or last page to see other CDP-S3 / MHC-S3 service manuals if exist.