Sony BDV-NF620 / BDV-NF720 / SS-TSB115 / SS-TSB116 Service Manual ▷ View online
SS-TSB115/TSB116
5
1-5. LOUDSPEAKER (8 cm) (SP1) (SS-TSB115)
3
Note: Please spread a sheet under a unit
not to injure front panel (NX-FS).
4
loudspeaker (8 cm) (SP1)
boss
boss
1
Remove the loudspeaker
(18 mm) wire.
ditch
– Front panel block inner view –
2 terminal (big)
2 terminal (small)
wire from
loudspeaker (18 mm)
loudspeaker (18 mm)
wire from loudspeaker (8 cm)
under the loudspeaker (8 cm)
under the loudspeaker (8 cm)
wire from loudspeaker (18 mm)
under the loudspeaker (8 cm)
under the loudspeaker (8 cm)
terminal (small)
From loudspeaker (18 mm)
From loudspeaker (18 mm)
terminal (small)
From loudspeaker (8 cm)
From loudspeaker (8 cm)
terminal (big)
From loudspeaker (8 cm)
From loudspeaker (8 cm)
terminal (big)
From loudspeaker (18 mm)
From loudspeaker (18 mm)
This side must be facing out side.
:LUHVHWWLQJ
mounted board (NETWORK)
mounted board
(NETWORK)
(NETWORK)
mounted board
(NETWORK)
(NETWORK)
loudspeaker (18 mm)
loudspeaker (8 cm)
– Front panel block inner view –
SS-TSB115/TSB116
6
1-6. SPEAKER TERMINAL (TM1) (SS-TSB115)
3
speaker terminal (TM1)
2
speaker cabinet block
speaker terminal
speaker terminal
speaker terminal
1
screw (3.5)
$WWDFKPHQWWKHVSHDNHUWHUPLQDO70
Note 1: Please insert speaker terminal straightly.
Note 2: Bend down speaker terminal to 45° as shown.
speaker terminal
OK
NG
90°
45°
bottom side
bottom side
bottom side
bottom side
SS-TSB115/TSB116
7
1-8. MOUNTED BOARD (NETWORK) (MT2) (SS-TSB116)
1-7. SPEAKER CABINET (NX-FH) BLOCK (SS-TSB116)
– Rear bottom view –
Note: Please spread a sheet under a unit
not to injure front panel (NX-FH).
4 claw
4 claw
2
five screws
(3.5)
2
two screws
(3.5)
7
speaker cabinet (NX-FH) block
3
Remove the speaker
cabinet (NX-FH) block
in the direction of an arrow.
5
Open the speaker
cabinet
block.
1
Use previous thin tweezers etc.
and remove five screw hole
covers not to damage the
speaker
cabinet.
tweezers etc.
1
Use previous thin tweezers etc.
and remove five screw hole
covers not to damage the
speaker
cabinet.
tweezers etc.
2
five screws
(3.5)
6 terminal
(big)
6 terminal
(small)
2
two screws (3.5)
4
mounted board
(NETWORK)
(MT2)
3
Note: Please spread a sheet under a unit
not to injure front panel (NX-FH).
– Front panel block inner view –
1 terminal (big)
1 terminal (big)
1 terminal (small)
1 terminal
(small)
SS-TSB115/TSB116
8
1-9. LOUDSPEAKER (18 mm) (SP4) (SS-TSB116)
ditch
guide
guide
guide
guide
ditch
ditch
ditch
2
screw (3.5)
2
screw (3.5)
4
loudspeaker (18 mm) (SP4)
3
Note: Please spread a sheet under a unit
not to injure front panel (NX-FH).
wire from
loudspeaker (18 mm)
loudspeaker (18 mm)
wire from
loudspeaker (8 cm)
loudspeaker (8 cm)
:LUHVHWWLQJ
mounted board (NETWORK)
loudspeaker (18 mm)
loudspeaker (8 cm)
mounted board (NETWORK)
–)URQWSDQHOEORFNLQQHUYLHZ–
1 terminal (big)
1 terminal (small)
terminal (small)
From loudspeaker (18 mm)
From loudspeaker (18 mm)
terminal (small)
From loudspeaker (8 cm)
From loudspeaker (8 cm)
terminal (big)
From loudspeaker (8 cm)
From loudspeaker (8 cm)
terminal (big)
From loudspeaker (18 mm)
From loudspeaker (18 mm)
mounted board (NETWORK)
–)URQWSDQHOEORFNLQQHUYLHZ–
This side must be facing out side.
Click on the first or last page to see other BDV-NF620 / BDV-NF720 / SS-TSB115 / SS-TSB116 service manuals if exist.