DOWNLOAD Sony BDV-E670W / BDV-E970W / HBD-E970W Service Manual ↓ Size: 7.31 MB | Pages: 115 in PDF or view online for FREE

6.  Diag (Audio Input Test)
This screen performs audio input test.

Screen 1: Selects the test category
Operation:
[

<]/[,]  Selects the category

[

m]/[

3

] 

Moves to the selected category

Screen 2: Select Audio Input Test
Operation:
[

M]/[m] 

Select test

[

3

] 

Start/stop input sound

[RETURN]  Returns to the selection of test category

• 

Digital Input

Input 

: SPDIF (optical, 48 kHz, 2 ch only).

Sound output 

: Speaker (2 ch).

• 

Analog Input

Input 

: Line In (2 ch).

Sound output 

: Speaker (2 ch).

 Diag

 Diag

7.  Diag (Wireless LAN Test)
This screen performs wireless LAN test.

Note: Not used for the servicing.

8.  Log: Error Log (Output of each Log)
This screen displays the contents of each log.

Note: Do not refer to the displayed date.

Screen 1: Selects log
Operation:
[1]/[

3

] 

Moves to the Error Log output screen

[RETURN]  Returns to the top menu of the service mode

Screen 2: Displays the Error Log
Operation:
[

<

] 

Returns to the previous page

[

,

] 

Moves to the next page

[RETURN] Returns to the screen (screen 1) that selects the log 

type

[RED] 

Writes the log contents to an USB memory device

• 

Viewing the log display

Error Log:
 

001 08/01/01 00: 53: 19: [ErrCode: 080400000000]

 

[Number (starting from old log) ] [date] [time] [error code]

About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB 
memory device inserted into the set

Note: Please do not press the [RED] button immediately after USB mem-

ory is inserted. 

 

  Please do not pull out USB memory immediately after the [RED] 

button was pressed.

Error Log:
 

When “getErrLogFile.trm fi le” exists in the USB memory de-
vice, errlog.log fi le is output.

 Select Log

 Error Log

9.  Factory Initialize (Factory Settings)
Return all of the player setting to their factory defaults.

Operation:
Screen 1
Press the [1] button in this screen when restoring the set to its fac-
tory settings.
All saved titles will also be deleted.
[1] 

Start Factory Initialize

[2] 

Start Factory Initialize for TV (Not used)

[

M]/[m] 

Moves the cursor

[

3

] 

Activate the selected cursor

[RETURN]  Returns to the top menu of the service mode

Screen 2
It is a screen of the end of initialization.
[RETURN]  Returns to the top menu of the service mode

To complete factory initialize, execute “Reset to Factory Default 
Settings” from the OSD menu, next execute COLD RESET.
Please disconnect AC power cord, and connect AC again. Press the 
[

?/1

] button to turn power on, and press the [HOME] button, Se-

lect “Setup” 

→ “Resetting” → “Reset to Factory Default Settings” 

→ “All settings” → “Start” from the OSD menu, and press the [

3

] 

button.  Then press the [

?/1

] button to turn the power on, and press 

the [

x

] and [VOLUME –] buttons on the set simultaneously and 

hold down (around 5 seconds) to execute COLD RESET.

Remove the AC power cord and insert the AC power cord again.
*  Operations in other service menus can also be performed.

 Factory Initialize

 Factory Initialize

10. Network (Network Test Diagnosis Screen: Ifconfi g)
Network menu for the wired ethernet.

Screen 1: Ifconfi g Test
Operation:
[

3

] Activate Ifconfi g (Display network setting)

[

,] 

Select ping test

[RETURN] Returns to the top menu of the service mode

Screen 2: Ping Test
Operation:
[

<

] 

Select Ifconfi g test

[RETURN]  Returns to the top menu of the service mode
(The details of a Ping test are “11. Network (Network Test Diagno-
sis Screen: Ping)”)

Screen 3: Ifconfi g Test Active
Display Ifconfi g command results.
Operation:
[

3

] Ifconfi g retry

[

,] 

Select Ping Test

[RETURN]  Returns to the top menu of the service mode

 Network

 Network

 Network

11. Network (Network Test Diagnosis Screen: Ping)
Ping test for the wired ethernet.

Screen 1: Ping Test
Operation:
[

<

] 

Select Ifconfi g test

[

m

] 

Ping execution preparation

[RETURN]  Returns to the top menu of the service mode

When “Ping to :>” is reversed, the [

3

] button is pressed and IP is 

inputted.
Operation:
[

3

] 

Finish to input

[RETURN]  Finish to input
[

<

] 

Finish to input and Select Ifconfi g Test

[0] to [9] 

Input Character sting ‘0-9’

[TIME] 

Input Character sting ‘.’

[CLEAR] Backspace

Screen 3: Ping Test Active
When [START] is reversed, the [

3

] button is pressed and execute 

ping.
Operation:
[

3

] 

Activate ping test

[

M

] 

The IP address of the ping point is set up

[RETURN]  Returns to the top menu of the service mode

 Network

 Network

12. System Information (System Information Display)
This screen displays system information.

Screen 1: Basic Information
Operation:
[

,

] 

Drive information (delta IOP of a drive is measured) 
displayed (go to screen 2)

[RETURN]  Returns to the top menu of the service mode

Screen 2: Drive Information Menu
Operation:
[

<

] 

Basic Information displayed (go to screen 1)

[RETURN]  Returns to the top menu of the service mode

When delta IOP is measured, it becomes impossible to use the Ver-
sion Up function.

Contents List:
Model
Destination
Sequence Number
MAC
IP
IFCON 

IFCON Version

Bootloader 

Bootloader Version

Host Main 

Host Main Version

Host Sub 

Host Sub Version

Middleware 

Middleware Version

ADSP 

ADSP Version

IF Model
IF Dest

Drive 

Firm Revision

CD DIOP 

Delta IOP

DVD DIOP 

Delta IOP

BD DIOP 

Delta IOP

CD LD TIME 

LD Time

DVD LD TIME  LD Time
BD LD TIME 

LD Time

 

 System Information

 

 System Information

13. Drive
This menu is used to operate the drive using drive-related diagnos-
tic and tools.

Screen 1: Selecting items under *Service Menu

 

   Service Menu
[1] Diag

Screen 2: Selecting items under *Drive

Operation:
[

M

]/[

m

] 

Move the cursor up and down

[

3

] 

Open the selected cursor item

[RETURN]  Returns to the top menu of the service mode

• 

Test item list

[1]  Drive OP data Write
[2]  Servo Parameter Check Menu
[3]  Servo Signal Check Menu
[4]  S-Curve Check Menu
[5]  Readability Check Menu
[6]  OP Position Check Menu
[7]  OP Check Menu
[8]  Load Eject Aging
[9]  Spindle Control Check Menu
[10] FA Test Mode

Screen 3: *Drive OP data Write
Purpose: Write OP data into fl ash IC
[

M

]/[

m

] 

Move the cursor up and down

[

3

] 

Start the selected cursor item

[RETURN]  Returns to the top menu of the service mode

Screen 4: *Servo Parameter Check Menu (Not Used)

 

 Servo Parameter Check Menu

Not used for the servicing.
Press the [RETURN] button if having entered this mode.

Screen 5: *Servo Signal Check Menu (Not Used)

 

Not used for the servicing.
Press the [RETURN] button if having entered this mode.