DOWNLOAD Sharp VC-S2000 (serv.man20) Service Manual ↓ Size: 1.15 MB | Pages: 13 in PDF or view online for FREE

Model
VC-S2000 (serv.man20)
Pages
13
Size
1.15 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
VCR / Operation Manual - Part 6 - Special features, Customised installation
File
vc-s2000-sm20.pdf
Date
PREV: Sharp VC-S2000 (serv.man19) User Manual / Operation Manual

Sharp VC-S2000 (serv.man20) User Manual / Operation Manual ▷ View online

37
CUSTOMISED INSTALLATION
INSTALLATION OF A SKY DIGIBOX RECEIVER
1.
Connect your Sky Digibox receiver to the VCR as shown in connecting the cables.
2.
Place the receiver near the VCR (ideally on the top). This ensures that the reflected 
infrared signals from the VCR which control the satellite receiver can reach it unimpeded.
3.
Ensure the receiver is not in Standby or any special mode.
INSTALLATION PROCEDURE
Turn the TV on and select the video channel . (As previously explained)
1.
     
2.
NOTE: 
  
•
The preset Sky channels can now be tuned in as part of the installation procedure. 
•
If the AUTO INSTALLATION screen doesn’t 
appear when you switch on your VCR or 
you wish to reset your VCR and start the 
installation again, refer to 
VCR RESET
 at 
the back of the book.
Press 
STOP
 to switch on the VCR.
Step through the on screen instructions by 
pressing the 
SET
 button. 
If problems persist contact the SHARP Customer Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
See next page to continue
P L E A S E
B E
S UR E
T H E
A E R I A L / S CAR T
CAB L E  I S
CONN E C T E D   T O   YOUR   V CR .  
                                                
                                                
               
S E T
: E N T E R     ME NU : E X I T
Press the 
SET
 button.
Press the 
SET
 button.
AU T O
I N S T A L L A T I ON
P R E S S
S E T
K E Y
T O S T AR T
                                               
                                               
                                               
               
S E T
: E N T E R     ME NU : E X I T
SUPER P.
SKIP SEARCH
MENU
SET
CLEAR
PLUSCODE
3D-DNR/TBC
TINS-3894 ENGLISH.book  Page 37  Wednesday, September 6, 2000  11:53 AM
38
CUSTOMISED INSTALLATION
INSTALLATION OF A SKY DIGIBOX RECEIVER
On completion, the 
MOVE MENU
 will appear 
showing the standard channel order. By pressing 
the MODE OSD button, the VCR will change to a 
blue background. This may help you see which 
channels your VCR has tuned in.
If problems persist contact the SHARP Customer Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/supp;ort
  MOV E    
1 / 5
1 BBC 1
7
1 3
2 BBC 2
8
1 4
3 I T V   9
1 5
4 CH 4   1 0
1 6
5 CH 5
 
1 1
1 7
6
1 2
1 8
S E L E C T E D        :  BBC 1              
    
  : S E L E C T E D
S E T
: E N T E R     ME NU : E X I T
SAT CONTROL WILL BE HIGHLIGHTED.
Leave SAT CONTROL  set to OFF and press 
SET
.
The VCR will attempt to copy the TV preset list 
(NexTView, Smart Link, Easy Link and 
Megalogic compatible TV’s only). During the 
copying process the display will show the TV 
presets that are being copied. If the VCR is 
unable to copy the TV preset list the terrestrial 
channels will be automatically installed. (Auto 
install may take a few minutes.)
3.
1
CH 2 2
AU T OMA T I C
SOR T I NG .
P L E A S E WA I T .
                                               
                                               
                                               
               
S E T
: E N T E R     ME NU : E X I T
Press the 
SET
 button.
S A T
R E C E I V E R    
     
 
S A T   CON T RO L           ON  
O F F
     
     
 : CHANGE
S E T
: E N T E R     ME NU : E X I T
Press 
MENU
 to exit if you are happy with 
the channel order, if not and you wish to 
change the order refer to 
MANUALLY 
SORTING CHANNELS
. 
The correct Time and Date should be 
displayed on your TV screen for 
approximately
 2
 seconds. If the clock is not 
automatically set, the clock screen will 
appear, refer to 
MANUALLY SETTING 
THE CLOCK
 for help on setting the time 
and date.
4.
MODE OSD
DISPLAY
AUDIO OUT
AM/PM
INPUT SELECT
1
2
3
4
5
7
8
6
9
TINS-3894 ENGLISH.book  Page 38  Wednesday, September 6, 2000  11:53 AM
39
CUSTOMISED INSTALLATION
INSTALLATION OF A SKY DIGIBOX RECEIVER
SKY DIGIBOX INSTALLATION
5.
Press 
MENU
.
6.
Press [
/
] to select 
SET
 
UP
. Press 
SET 
to confirm.
7.
CHANNEL PRESET
 will be highlighted. 
Press 
SET
 to confirm.
8.
Press [
/
] to select 
SAT RECEIVER
. 
Press 
SET
 to confirm. The satellite receiver 
screen will appear.
If problems persist contact the SHARP Customer Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
MANUAL  TUN I NG
S AT RE C E I V ER
S AT   PROGRAM   S EARCH
Press [
/
], to set 
SAT CONTROL
 to 
ON
.
S A T
R E C E I V E R    
     
 
S A T   CON T RO L          
ON  
O F F
➔
I N P U T      
         
  R F I N
L 2
 
               
         
         
     
S A T   NO .  
         
  0 0 1  
     
P L E A S E   CONN E C T - - - - -  
     
S A T
L 2  
V CR
- - - - - - - - - - -
  
  : S E L EC T
 : CHANGE
S E T
: E N T E R     ME NU : E X I T
9.
VOLUME
INPUT
SELECT
CHANNEL
TV OPERATE
TIMER
ON/OFF
MODE OSD
DISPLAY
AUDIO OUT
AM/PM
INPUT SELECT
1
2
3
4
5
7
8
6
9
10.
Press [
/
], to select 
INPUT
. L2 will 
be highlighted. 
If the VCR is not  connected to the Digibox 
as shown in 
CONNECTING THE 
CABLES
.
i.
Your satellite receiver should be connected 
to the Antenna (RF in on the back of the 
VCR) select RF IN using [
/
] You will need 
to tune the VCR into the Digibox.
ii.
Press [
/
] to select CHANNEL.
Press  [
]. The current channel will be 
displayed as a background to the on-screen 
display.  If this is not a satellite channel press 
[
] again. Continue until you see a satellite 
channel.
11.
Press  [
/
]  to select 
SAT NO
. Using 
the
 NUMBER BUTTONS
 enter 
128
.
12.
When the arrows have moved from VCR to 
SAT on the on screen display,  press 
SET
 to 
confirm.
TINS-3894 ENGLISH.book  Page 39  Wednesday, September 6, 2000  11:53 AM
40
CUSTOMISED INSTALLATION
INSTALLATION OF A SKY DIGIBOX RECEIVER
13.
Press  [
/
]  to select 
MANUAL 
TUNE
.
14.
Press 
SET
 to confirm
15.
PRESET
 will be highlighted. Press        
[
/
] to choose the required VCR 
preset channel.
16.
Press [
/
]  to select 
SOURCE
. 
Then press [
/
] to select 
SAT
.  
17.
Then press [
/
] to select 
CHANNEL
. Using the channel guide on 
the following page enter the satellite 
channel using the 
NUMBER 
BUTTONS
.
18.
Wait for the VCR to display ST*** next to 
the Preset channel number (This will take 
a few seconds), Press 
SET
 to confirm.
19.
Repeat procedure from point 16 until all 
desired satellite channels are stored in to 
the VCR.
20.
Press 
MENU
 to exit
21.
Please return to 
HOW TO PLAYBACK 
A VIDEO TAPE
, at the front of the 
manual.
IMPORTANT NOTE: 
•
 If there is no response from your Sky Digibox, try adjusting its position to improve the Infra 
Red VCR to satellite receiver reception.
MANUAL  TUN I NG
S AT RE C E I V ER
S AT   PROGRAM   S EARCH
➔
P R E S E T    
S T 1 0 6
1
SOURC E  CH
S A T
CHANN E L
           CH 2 1
F I N E  T UN I NG        
   
D E COD E R
   
ON
O F F
S K I P          
 
 ON
O F F
         
   
   
 
       
   
   
   
   
▲
▲
MENU
SET
CLEAR
PLUSCODE
If problems persist contact the SHARP Customer Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
TINS-3894 ENGLISH.book  Page 40  Wednesday, September 6, 2000  11:53 AM
Page of 13
Display

Click on the first or last page to see other VC-S2000 (serv.man20) service manuals if exist.

RANDOM: