Sharp VC-MH732HM (serv.man28) User Manual / Operation Manual ▷ View online
GB-17
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
You can make a maximum of eight delayed recordings up to a year in advance.
The example shown is for 24-hour clock operation. 12-hour clock operation can be selected
from the manual clock setting menu.
from the manual clock setting menu.
12-hour clock am/pm can be selected using the
AM/PM
button on the remote control.
•
If
appears on the VCR display, press
TIMER ON/OFF
before starting.
•
Check that the clock is displaying the correct time.
SETTING A RECORDING
For example: Recording a programme on channel 3 from 21:05 to 22:30 on July 9th.
1.
Press
STOP
(
) to switch on the VCR.
2.
Press
MENU
.
3.
Press [
/
] to select TIMER. Press
SET
to
confirm.
4.
The position which is initially highlighted is the
next available timer record entry. Press
next available timer record entry. Press
SET
to
confirm this.
•
The display will automatically show today's
date.
Either: If this is the date you wish to make the
recording on, press
date.
Either: If this is the date you wish to make the
recording on, press
SET
to confirm this.
Or: enter the recording date using the[
/
] or the
NUMBER BUTTONS
. Enter two
digits for the day, then two for the month. For
example for July 9th, press
example for July 9th, press
0 9
(9th), then
0 7
(July).
5.
Then press
SET
to confirm.
6.
If you want to make additional recordings at
the same time each day or week, use [
the same time each day or week, use [
/
] or select D (daily) or W (weekly). Then
press
SET
to confirm.
7.
Enter the channel using the [
/
] or the
NUMBER BUTTONS
. For example to
record a programme on channel 3, press 0 3.
Then press
Then press
SET
to confirm.
MENU SCREEN
T I ME R
MOD E
S E T U P
M N
: S E L E C T
S E T
: E N T E R ME NU : E X I T
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7
D
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-18
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
8.
Enter the start time using the [
/
] or the
NUMBER BUTTONS
hours first then minutes
(when entering less than 10 minutes add a '0'
before the number), for example for 21:05 start,
press
before the number), for example for 21:05 start,
press
2 1 0 5
. Then press
SET
to confirm.
9.
Enter the stop time, for example for 22:30 stop,
press
press
2 2 3 0
.
10.
If your VCR has long play facility and you wish to
change the
change the
RECORDING SPEED
, use the
[
/
] to highlight SP. Press [
/
] to
select standard play (SP) or long play (LP) as
required.
required.
11.
[See note below]. For VPS/PDC setting use the
[
/
]
to highlight the final column. Using
the [
/
] will select VPS/PDC ON or OFF
(* = ON - = OFF).
12.
Press
SET
to confirm.
•
The MENU now shows all the timer settings you
have entered. If you wish to make additional
timer recordings, repeat this procedure.
have entered. If you wish to make additional
timer recordings, repeat this procedure.
13.
When you have completed entering timer
settings, press
settings, press
MENU
to remove the menu
from the TV screen.
14.
Press
TIMER ON/OFF
once to place the VCR
in TIMER STAND-BY mode.
will be shown on
the display.
NOTES:
•
VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
•
If
flashes a video tape has not been inserted into the VCR.
•
If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
been removed.
•
During recording, press
STOP
(
) to cancel the recording. If there are further
recordings to be made, the VCR will return to TIMER STANDBY.
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7 D 0 3
2 1 : 0 5
- : - -
S P *
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7 D 0 3
2 1 : 0 5
- : - -
L P
*
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7 D 0 3
2 1 : 0 5
2 2 : 3 0
L P
-
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-19
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
CHECKING, CHANGING AND CANCELLING A RECORDING
CHECKING A RECORDING
1.
If in TIMER STANDBY mode, press
TIMER ON/OFF
to exit.
2.
Press
STOP
to switch on the VCR.
3.
Press
MENU
.
4.
Press [
/
] To select TIMER. Press
SET
to
confirm
•
All the delayed recordings in the VCRs memory
will be shown.
will be shown.
•
You can check the settings and change or
cancel them.
cancel them.
CHANGING A RECORDING
1.
Follow steps 1 to 4 of
CHECKING A
RECORDING
.
2.
If you wish to change a delayed recording,
press [
press [
/
] to highlight the recording,
then press
SET
.
3.
Press [
/
] to highlight the setting to be
changed and correct it by using the[
/
]
or the
NUMBER BUTTONS
.
4.
When all corrections are complete press
SET
,
then press
MENU
.
CANCELLING A RECORDING
1.
Follow steps 1 to 4 of
CHECKING A
RECORDING
.
2.
If you wish to cancel a delayed recording, press
[
[
/
] to highlight the recording to be
cancelled, then press
CLEAR
.
3.
Press
MENU
.
NOTE:
•
If there are some programmes to be recorded, do not forget to press
TIMER ON/OFF
button to return the VCR to TIMER STAND-BY mode.
MENU SCREEN
T I ME R
MOD E
S E T U P
M N
: S E L E C T
S E T
: E N T E R ME NU : E X I T
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-20
ADVANCED OPERATION
AUDIO AND YOUR VCR
(HIFI VCR’S ONLY)
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
AUDIO OUT
button on the remote control. If you wish to change the sound output you can
use the
AUDIO OUT
button as follows:
•
Press
AUDIO OUT
once. The LEFT audio channel will be sent to BOTH speakers.
L
will
appear on the VCR display.
•
Press
AUDIO OUT
twice. The RIGHT audio channel will be sent to BOTH speakers.
R
will
appear on the VCR display.
•
Press
AUDIO OUT
three times. The MONO track will be sent to BOTH speakers.
L
and
R
will disappear from the VCR display.
•
Pressing
AUDIO OUT
a fourth time, normal Hi-Fi stereo sound will be heard.
L
and
R
will
appear on the VCR display.
NICAM Hi-Fi STEREO SOUND
Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the
procedure below:
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the
procedure below:
4.
Press
MENU
to display the main menu on the
screen.
5.
Press [
/
] to select MODE.
6.
Press
SET
. NICAM will be selected.
7.
Press
[
/
] to select OFF.
8.
Press
SET
, to return to the menu screen.
9.
Press
MENU
, to exit to normal screen.
NOTES:
•
If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.
will not appear on the display.
•
lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality may be
improved by adjusting the tracking using CHANNEL
improved by adjusting the tracking using CHANNEL
/
.
•
If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
and the sound will be in mono.
•
NICAM sound may not be stereo.
➝
N I CAM
AU T O
O F F
CO L OUR
AU T O
P A L
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
Click on the first or last page to see other VC-MH732HM (serv.man28) service manuals if exist.