Sharp VC-MH711HM (serv.man11) User Manual / Operation Manual ▷ View online
GB-17
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
CHECKING, CHANGING AND CANCELLING A RECORDING
CHECKING A RECORDING
1.
If in TIMER STANDBY mode, press
TIMER ON/OFF
to exit.
2.
Press
STOP
to switch on the VCR.
3.
Press
MENU
.
4.
Press [
/
] To select TIMER. Press
SET
to
confirm
•
All the delayed recordings in the VCRs memory
will be shown.
will be shown.
•
You can check the settings and change or
cancel them.
cancel them.
CHANGING A RECORDING
1.
Follow steps 1 to 4 of
CHECKING A
RECORDING
.
2.
If you wish to change a delayed recording,
press [
press [
/
] to highlight the recording,
then press
SET
.
3.
Press [
/
] to highlight the setting to be
changed and correct it by using the[
/
]
or the
NUMBER BUTTONS
.
4.
When all corrections are complete press
SET
,
then press
MENU
.
CANCELLING A RECORDING
1.
Follow steps 1 to 4 of
CHECKING A
RECORDING
.
2.
If you wish to cancel a delayed recording, press
[
[
/
] to highlight the recording to be
cancelled, then press
CLEAR
.
3.
Press
MENU
.
NOTE:
•
If there are some programmes to be recorded, do not forget to press
TIMER ON/OFF
button to return the VCR to TIMER STAND-BY mode.
MENU SCREEN
T I ME R
MOD E
S E T U P
M N
: S E L E C T
S E T
: E N T E R ME NU : E X I T
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
712.book Page 17 Friday, May 14, 1999 12:08 PM
GB-18
ADVANCED OPERATION
AUDIO AND YOUR VCR
(HIFI VCR’S ONLY)
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
AUDIO OUT
button on the remote control. If you wish to change the sound output you can
use the
AUDIO OUT
button as follows:
•
Press
AUDIO OUT
once. The LEFT audio channel will be sent to BOTH speakers.
L
will
appear on the VCR display.
•
Press
AUDIO OUT
twice. The RIGHT audio channel will be sent to BOTH speakers.
R
will
appear on the VCR display.
•
Press
AUDIO OUT
three times. The MONO track will be sent to BOTH speakers.
L
and
R
will disappear from the VCR display.
•
Pressing
AUDIO OUT
a fourth time, normal Hi-Fi stereo sound will be heard.
L
and
R
will
appear on the VCR display.
NICAM Hi-Fi STEREO SOUND
Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the
procedure below:
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the
procedure below:
1.
Press
MENU
to display the main menu on the
screen.
2.
Press [
/
] to select MODE.
3.
Press
SET
. NICAM will be selected.
4.
Press
[
/
] to select OFF.
5.
Press
SET
, to return to the menu screen.
6.
Press
MENU
, to exit to normal screen.
NOTES:
•
If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.
will not appear on the display.
•
lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality may be
improved by adjusting the tracking using CHANNEL
improved by adjusting the tracking using CHANNEL
/
.
•
If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
and the sound will be in mono.
•
NICAM sound may not be stereo.
➝
N I CAM
AU T O
O F F
CO L OUR
AU T O
P A L
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
712.book Page 18 Friday, May 14, 1999 12:08 PM
GB-19
ADVANCED OPERATION
AUDIO AND YOUR VCR
(HiFi VCR’S ONLY)
CONNECTING TO AUDIO EQUIPMENT
The diagram below shows how to connect your VCR to audio equipment. When connected
in this way stereo sound is possible from the speakers.
in this way stereo sound is possible from the speakers.
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE
+
BACK OF
EXISTING AERIAL
CABLE
RF CONNECTION CABLE
RF-OUT
AUDIO OUT
AMPLIFIER
L and R
TELEVISION
AERIAL IN
AUDIO PHONO LEADS
(NOT SUPPLIED)
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
712.book Page 19 Friday, May 14, 1999 12:08 PM
GB-20
ADVANCED OPERATION
PLAYBACK OF A VIDEO TAPE
CHECKING THE AMOUNT OF TAPE REMAINING
When you load a video tape into the VCR it can calculate approximately the amount of
video tape remaining in hours and minutes. This is useful in determining whether or not there is
sufficient tape left to make a recording.
When a video tape is playing, the amount of tape remaining is calculated for you
automatically.
To display the amount of video tape remaining:
1.
Load the video tape into the VCR
2.
Press
DISPLAY
on the remote control as many times as necessary until “R” appears on
the VCR display. The tape will wind forward and then return to its original position. The
tape remaining will be shown on the VCR display in hours and minutes.
By pressing the
TAPE SPEED
button on the remote control the remaining time will
change between long play and standard play.
For example,
in standard play 1 hour 23 minutes is left on the tape:
in standard play 1 hour 23 minutes is left on the tape:
in long play 2 hour 46 minutes is left on the tape:
NOTES:
PLAYING BACK A VIDEO TAPE REPEATEDLY
You can set your VCR to automatically rewind at the end of playing a video tape and replay
the entire tape again. REPEAT will appear on the on-screen display when selected.
To use this feature:
1.
Press
MENU
to display the main menu on the
screen.
2.
Press [
/
] to select MODE.
3.
Press
SET
.
4.
Press [
/
] to select REPEAT.
5.
Press [
/
] to select ON.
6.
Press
SET
.
7.
Press
MENU
to return to normal screen.
•
Do not interrupt the tape remaining calculation.
•
If less than 5 minutes of tape remains the display will flash.
Pr
Pr
MODE MENU SCREEN
B L U E MU T E
AU T O
O F F
➝
R E P E A T
ON
O F F
M N
: S E L E C T
O P
: CHANGE
S E T
: E N T E R ME NU : E X I T
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
712.book Page 20 Friday, May 14, 1999 12:08 PM
Click on the first or last page to see other VC-MH711HM (serv.man11) service manuals if exist.