Sharp VC-M313 (serv.man20) User Manual / Operation Manual ▷ View online
10
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
SHARP SUPER PICTURE
should enhance the picture quality during playback. It is
normally set to ON. To turn
SHARP SUPER PICTURE
on or off press
SUPER P.
on the
VCR front panel.
•
For double speed playback (without sound), press
PLAY/X2
(
) again.
•
To revert to normal playback, press
PLAY/X2
(
) again.
•
To stop the video tape, press
STOP
(
).
•
To eject the tape press
EJECT
on the VCR.
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
flashes on the on-screen
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
•
Press
CHANNEL
or
to position picture interference off the TV screen. (Manual
Tracking)
•
Press
CHANNEL
and
buttons together to start Auto Tracking.
PAUSING AND SLOW MOTION
1.
Press
PLAY/X2
(
) to start the video tape playing.
2.
To pause the video tape, press
PAUSE/STILL (
)
.
•
To minimise jitter whilst in pause mode press
CHANNEL
or
.
•
Press
PLAY/X2
(
) to resume playback.
3.
To playback in slow motion (without sound) press
SLOW
on the remote control. Slow
motion speed can be adjusted using the
or
buttons next to the slow button.
Picture disturbance can be improved by using the
CHANNEL
or
during slow
motion playback.
•
Press
PLAY/X2
(
)to resume playback.
NOTES:
•
When using SLOW MOTION function some mechanical noise may be heard.
•
There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
using Pause and Slow functions.
•
PAUSE mode will disengage after about 5 minutes.
DPSS
INPUT SELECT
CHANNEL
AM/PM
SLOW
TAPE
SPEED
TV/VCR
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
7
8
0
9
Remote Control
TINS-3812UMZZ ENGLISH.book Page 10 Friday, May 5, 2000 11:43 AM
11
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1.
Press
STOP
(
) to stop the video tape.
2.
Press
FAST FORWARD
(
)/
REWIND
(
) on the remote control or on the VCR
front panel.
3.
To stop fast forward/rewind, press
STOP
(
).
FORWARD/REVERSE VISUAL SEARCH
1.
During playback, press
FAST FORWARD
(
)/
REWIND
(
) on the remote
control, or on the VCR front panel.
2.
To decrease the speed, press
FAST FORWARD
(
)/
REWIND
(
) again.
3.
Press
PLAY/X2
(
) to resume playback.
NOTE:
•
There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
using Visual Fast Forward/Rewind functions.
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
Remote Control
TINS-3812UMZZ ENGLISH.book Page 11 Friday, May 5, 2000 11:43 AM
12
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing
next/previous channel by pressing
CHANNEL
[
or
].
To change between single digit and 2-digit channel numbers, press
AM/PM
.
For example, for channel 24, press
AM/PM
then press
2
4
.
You can record the channel you are watching or a different channel.
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the VCR.
3.
To start recording, press
REC
(
).
4.
To pause during recording, press
PAUSE/STILL
(
).
5.
To continue recording, press
REC
(
).
6.
To stop recording, press
STOP
(
) once.
SIMPLE TIMED RECORDING:
1.
To specify a stop time, press
REC
(
).
2.
Each additional press of
REC
(
) will delay
the stop time by 10 minutes.
3.
To stop recording at any time, press
STOP
(
) once.
NOTES:
•
If the tape ends before the recording is complete the VCR will stop recording, rewind,
eject the tape and place the VCR into STANDBY mode, or just eject the tape and place
the VCR in STANDBY timer mode if the VCR is in timer record mode.
eject the tape and place the VCR into STANDBY mode, or just eject the tape and place
the VCR in STANDBY timer mode if the VCR is in timer record mode.
•
If the VCR ejects the video tape when you press
REC
(
) the tape is record
protected. i.e. record protection tab has been removed.
STOP 15:30
DPSS
INPUT SELECT
CHANNEL
AM/PM
SLOW
TAPE
SPEED
TV/VCR
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
7
8
0
9
Remote Control
TINS-3812UMZZ ENGLISH.book Page 12 Friday, May 5, 2000 11:43 AM
13
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
Before you start!
•
If
appears on the VCR display, press
TIMER ON/OFF
to remove the
symbol.
•
Check that the VCR clock is displaying the correct time.
VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
1.
Press the
PLUSCODE
button on the remote
control.
2.
Enter the VIDEOPLUS+ number from the TV
listing using the
listing using the
NUMBER BUTTONS
.
NOTE:
3.
Press the [
/
] menu select buttons to select ONCE,
WEEKLY, DAILY.
4.
If you want to make additional recordings at the same time
each day or week, then use
[
/
]
to select the WEEKLY,
or DAILY option as appropriate.
5.
Press
SET
to confirm.
NOTE:
The first time that you use VIDEOPLUS+ to make a
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
6.
Enter the channel you wish to record using
the
the
NUMBER BUTTONS
, for example if
you wish to record channel 2 press
0 2
. The
VCR will remember this for the future.
See next page to continue
•
An ERROR message will appear if you have entered a number that is not a current
VIDEOPLUS+ number. If this happens press
VIDEOPLUS+ number. If this happens press
CLEAR
to delete the numbers as required
and enter the correct VIDEOPLUS+ number
•
Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR
to return to the VIDEOPLUS+ menu, and re-enter the correct VIDEOPLUS+
number
→
P L U S COD E .
-
ONC E
WE E K L Y
DA I L Y
MENU SELECT
BUTTONS
BUTTONS
REMOTE CONTROL
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
P R
: CH 3 2
O P
: S E L E C T
M N
: CHANGE
S E T
: E N T E R ME NU : E X I T
TINS-3812UMZZ ENGLISH.book Page 13 Friday, May 5, 2000 11:43 AM
Click on the first or last page to see other VC-M313 (serv.man20) service manuals if exist.