DOWNLOAD Sharp VC-M313 (serv.man18) Service Manual ↓ Size: 946.59 KB | Pages: 18 in PDF or view online for FREE

13

•

If 

 appears on the VCR display, press 

 to remove the 

 symbol. 

•

Check that the VCR clock is displaying the correct time.

VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the 
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).

Press the 

 button on the remote 

control.

Enter the VIDEOPLUS+ number from the TV 
listing using the 

.

Press the [

/

] menu select buttons to select ONCE, 

WEEKLY, DAILY.

If you want to make additional recordings at the same time 

each day or week, then use 

[

/

]

 to select the WEEKLY, 

or DAILY option as appropriate.

Press 

 to confirm.

The first time that you use VIDEOPLUS+ to make a 
recording on each channel Preset, (PR) may be 
highlighted on the On-Screen Display.

Enter the channel you wish to record using 
the 

, for example if 

you wish to record channel 2 press 

. The 

VCR will remember this for the future.

•

An ERROR message will appear if you have entered a number that is not a current 
VIDEOPLUS+ number.  If this happens press 

to delete the numbers as required 

and enter the correct VIDEOPLUS+ number

•

Check that the menu list agrees with the times shown in the TV listing. If it does not press 

 to return to the VIDEOPLUS+ menu, and re-enter the correct VIDEOPLUS+ 

number

→

O P

M N

TINS-3812UMZZ ENGLISH.book  Page 13  Friday, May 5, 2000  11:43 AM

14

If your VCR has long play facility and you wish 

to change the 

, use 

the 

[

/

]

to highlight SP. Press [

/

] 

to select standard play (SP) or long play (LP) 

as required.

Press 

 to confirm the programme. The 

VIDEOPLUS+ menu will reappear. If you wish 

to enter further VIDEOPLUS+ recordings 

repeat this procedure.

When you have completed entering timer 

settings, press 

 to remove the menu 

from the TV screen.

Ensure that the tape on which you wish to 

record is inserted into the VCR, then press 

TIMER ON/OFF once to place the VCR in 

TIMER STANDBY mode. 

 will be shown on 

the display.

•

You may also access the VIDEOPLUS+ menu by the following procedure:

 Press 

.

 The VIDEOPLUS+ option will be highlighted. Press 

 to confirm.

Continue from step 2 above.

•

If 

 flashes a video tape has not been inserted into the VCR.

•

If the video tape is ejected when the VCR tries to record the record protection tab has 
been  removed. 

•

During recording, press

 (

) to cancel the recording. If there are further 

recordings to be made, the VCR will return to TIMER STANDBY.

O P

M N

→

TINS-3812UMZZ ENGLISH.book  Page 14  Friday, May 5, 2000  11:43 AM

15

You can make a maximum of eight delayed recordings up to a year in advance.
The example shown is for 24-hour clock operation. To change to12-hour clock operation refer 
to 

section of this manual.

12-hour clock am/pm can be selected using the 

 

 button on the remote control.

•

If 

 appears on the VCR display, press 

 to remove the 

 symbol.

•

Check that the VCR clock is displaying the correct time.

For example: Recording a programme on channel 3 from 21:05 to 22:30 on July 9th.

Press

 (

) to ensure that the VCR is 

switched on.

Press the 

 button

.

Press the [

/

] menu select buttons to 

select 

.  Press 

 to confirm.

Press 

again, the on-screen display will now 

show today’s date. 
If you wish to change the date use the
[

/

] or the 

. Enter 

two digits for the day, then two for the month. 
For example for July 9th, press 

 (9th), then 

 (July).

When the correct date for your recording is 
shown, press the

menu select button to move 

to the next setting. 

If you want to make additional recordings at 
the same time each day or week, use 
[

/

] to select D (daily) or W (weekly).

Then press

to move to the next setting.

Enter the channel number using the [

/

] 

or the 

. For example to 

record a programme on channel 3, press 0 3. 
Then press

to move to the next setting.

M N

TINS-3812UMZZ ENGLISH.book  Page 15  Friday, May 5, 2000  11:43 AM

16

Enter the start time using the [

/

] or the 

, hours first then 

minutes (when entering less than 10 hours or 
minutes add a '0' before the number), for 
example for 21:05 start, press 

. 

Then press

to move to the next setting.

Enter the stop time, for example for 22:30 stop, 
press 

.

If your VCR has long play facility and you wish to 
change the 

, use the         

[

/

]

 to highlight SP. Press [

/

] to 

select standard play (SP) or long play (LP) as 
required.

Press 

to confirm.

•

The MENU now shows all the timer settings you 
have entered. If you wish to make additional 
timer recordings, repeat this procedure.

When you have completed entering timer 
settings, press 

 to remove the menu 

from the TV screen.

Ensure that the tape on which you wish to 
record is inserted into the VCR, then press 

once to place the VCR in 

TIMER STANDBY mode. 

 will be shown on the 

display.

•

If 

 flashes a video tape has not been inserted into the VCR.

•

If the video tape is ejected when the VCR tries to record the record protection tab has 
been  removed.

•

During recording, press 

 (

) to cancel the recording. If there are further 

recordings to be made, the VCR will return to TIMER STANDBY.

TINS-3812UMZZ ENGLISH.book  Page 16  Friday, May 5, 2000  11:43 AM