Sharp VC-M311HM (serv.man5) User Manual / Operation Manual ▷ View online
29
SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for
the repair, or at its option the replacement, of this product subject to the
conditions listed below:
the repair, or at its option the replacement, of this product subject to the
conditions listed below:
1.This guarantee shall only apply to faults which are due to inferior
workmanship or materials. It does not cover faults or damage by
accident, misuse, fair wear and tear, neglect, tampering with the product,
or repair other than by a Service Facility appointed by SHARP.
accident, misuse, fair wear and tear, neglect, tampering with the product,
or repair other than by a Service Facility appointed by SHARP.
2.As this product is intended for private domestic use only, the guarantee will
not apply if the product is used in the course of a business, trade or
profession.
profession.
3.To benefit from this guarantee, any fault which occurs must be notified to
SHARP, or its appointed Service Facility within one year from the date this
product was purchased. Proof of purchase must be provided.
product was purchased. Proof of purchase must be provided.
4.The guarantee does not cover carriage costs, batteries or video tapes.
5.In the unlikely event of this product requiring repair, please contact the
supplier from whom it was purchased. Where this is not possible, please
contact the SHARP Customer Information Centre on the telephone number
given below.
contact the SHARP Customer Information Centre on the telephone number
given below.
6.This guarantee is offered as an additional benefit to your statutory rights
and does not affect these rights in any way.
7.No person has any authority to vary the terms or conditions of this
guarantee.
If you have any difficulty operating this product, or would like information on
other SHARP products, please telephone the SHARP Customer Information
Centre on the number given below.
other SHARP products, please telephone the SHARP Customer Information
Centre on the number given below.
SHARP Customer Information Centre: Tel: 0990 274277
Please note that all calls are charged at local rate.
Please note that all calls are charged at local rate.
GUARANTEE
VC-M301HM/LM 3/2/99 11:57 am Page 33
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
●
blue wire to the terminal marked N or coloured black or blue.
●
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician. Do not use the VCR.
Contact your SHARP dealer or a qualified electrician. Do not use the VCR.
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does
not have a mains power switch. When
connected to the mains, the unit will draw
current at all times to power the clock. Be sure
to unplug the VCR when it is not to be used for
several months.
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does
not have a mains power switch. When
connected to the mains, the unit will draw
current at all times to power the clock. Be sure
to unplug the VCR when it is not to be used for
several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
CONNECTING TO THE MAINS
30
VC-M301HM/LM 3/2/99 11:57 am Page 34
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
●
blue wire to the terminal marked N or coloured black or blue.
●
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician. Do not use the VCR.
Contact your SHARP dealer or a qualified electrician. Do not use the VCR.
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does
not have a mains power switch. When
connected to the mains, the unit will draw
current at all times to power the clock. Be sure
to unplug the VCR when it is not to be used for
several months.
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does
not have a mains power switch. When
connected to the mains, the unit will draw
current at all times to power the clock. Be sure
to unplug the VCR when it is not to be used for
several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
CONNECTING TO THE MAINS
30
VC-M301HM/LM 3/2/99 11:57 am Page 34
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
mains socket. If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.) If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
●
blue wire to the terminal marked N or coloured black or blue.
●
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician. Do not use the VCR.
Contact your SHARP dealer or a qualified electrician. Do not use the VCR.
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does
not have a mains power switch. When
connected to the mains, the unit will draw
current at all times to power the clock. Be sure
to unplug the VCR when it is not to be used for
several months.
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does
not have a mains power switch. When
connected to the mains, the unit will draw
current at all times to power the clock. Be sure
to unplug the VCR when it is not to be used for
several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
You must use a 3-amp fuse, marked (ASTA) or (BSI) to BS-1362. Remove the
fuse cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
CONNECTING TO THE MAINS
30
VC-M301HM/LM 3/2/99 11:57 am Page 34
