DOWNLOAD Sharp VC-M311HM (serv.man5) Service Manual ↓ Size: 1.91 MB | Pages: 34 in PDF or view online for FREE

25

TIMER indicator.
AUDIO OUTPUT indicators. 
RECORDING indicator. 
CHILD LOCK indicator. 
AM/PM indicators. 
STOP indicator.
VCR mode indicator.
PRESET CHANNEL indicator. 

VIDEO PROGRAMMING
SYSTEM/PROGRAMME DELIVERY
CONTROL indicator.
LONG PLAY indicator. 
STANDARD PLAY indicator. 
VIDEO TAPE indicator. 
DECODER indicator

Pr

V

PS

P

DC

VCR

AM

PM

STOP

D

Some models do not have all the features shown, therefore, they will not appear on the
display.

VC-M301HM/LM  3/2/99 11:57 am  Page 29

● 

The default time and date will not be displayed if the clock has not been set.

●

The VCR will return to display 1. each time it is switched on.

●

If you are recording from this VCR to another, make sure you remove the display from
the screen otherwise it will be recorded.

All the information you need on the VCR status will be summarised on the on-screen display.
If you are recording, playing back a tape or watching a broadcast on the video channel
you can call up three standard on-screen displays. The display can be selected by pressing
the MODE OSD button on the remote control, 1,2,3 or 4 times.

■

Programme number and channel

NICAM signal

Tape speed

Audio output mode

Time

Date

Tape remaining

Tape counter

Tape Status

{

These depend on
model features

■

3.COUNTER, this display will show the

tape counter and amount of tape
remaining.

4.DISPLAY OFF, this will remove the

display from the screen.

1.AUTO, the current mode and channel

number will be displayed for 3 seconds
when an operation or number button is
pressed.

2.FULL., all the active features will also be

shown on screen.

26

VC-M301HM/LM  3/2/99 11:57 am  Page 30

Format:
Number of heads:
Video signal system:
Maximum playing time:
Tape width:
Tape speed:
Antenna:
Reception channels:
RF output signal:
Power requirement:
Power consumption:
Operating temperature:
Storage temperature:
Video input:
Video output:
Audio input:
Audio output:
Dimensions:
Weight:
Supplied accessories:

VHS PAL  standard
Two heads
PAL colour or monochrome signals: 625 lines
480 min. with E-240 video tape in Long play mode
12.7 mm
23.39 mm/s Standard Play (SP): 11.70 mm/s Long play (LP)
75 

Ω

unbalanced

UHF channel 21-69 (VHF channels A-J, VC-M301LM only)
UHF channel 21-69
AC 230V - 240V, 50 Hz
14W (Low power  

≤

1W)

5

O

C to 40

O

C

-20

O

C to 55

O

C

1.0 Vp-p, 75 

Ω

1.0 Vp-p, 75 

Ω

Line 1 : -3.8 dBs, 10 k

Ω  

Line 1 : -3.8dBs, 1 k

Ω

360(W) x 289(D) x 93(H) mm
3.2 kg (approx)
75 

Ω

RF connection cable, operation manual, remote control,

AA /R6/UM3 battery (x2)

●

Specifications are subject to change without notice as part of our policy of continuous
improvement.

●

No liability is accepted for any inaccuracies or omissions in this publication, although
every possible care has been taken to make it complete and as accurate as possible.

27

VC-M301HM/LM  3/2/99 11:57 am  Page 31

Display is not working.

VCR will not operate - 

appears

in VCR display.

VCR will not respond to any
commands.

Tape cannot be loaded.

VCR cannot be operated by remote
control.

No picture appears.

Rewind is not possible.

Picture does not change even
though CHANNEL

buttons

are pressed.

Desired channel position cannot be
selected.

No colour or poor TV picture on
normal viewing.

Playback picture is snowy.

Tape is automatically ejected when
pressing RECORD (

) or TIMER

ON-OFF buttons.

/

●

Make sure the VCR is not in LOW POWER mode.

●

Make sure the power cord is plugged in.

●

Make sure the wall socket has power (plug another appliance in).

●

Press the TIMER ON-OFF button to disengage timer.

●

Check CHILD LOCK is not engaged.

●

Safety device operating: unplug VCR for 2 hours.

●

Make sure there is no other tape in the VCR.

●

Make sure you are loading the tape correctly.

●

Remote control is too far away from the main unit.

●

Point the remote control at the VCR.

●

Batteries are flat - replace both.

●

Batteries have not been inserted correctly.

●

VCR is positioned in strong light.

●

Make sure TV is set to the video channel.

●

Check all connecting cables.

●

Make sure tape is not at the start.

●

Make sure VCR is not in timer or menu mode.

●

The channel position has been set to be skipped.
Cancel the skip mode for that channel.

●

Make sure all the cables are connected properly.

●

Make sure VCR power cord is properly plugged in.

●

Adjust the tracking using CHANNEL           buttons.

●

Try another tape.

●

The video heads may have been contaminated - refer to a SHARP
Service Facility. 

●

The record-protection tab has been removed.

/

28

VC-M301HM/LM  3/2/99 11:57 am  Page 32