DOWNLOAD Sharp VC-M303 (serv.man22) Service Manual ↓ Size: 8.76 MB | Pages: 36 in PDF or view online for FREE

10

•

For double speed playback (without sound), press the 

 button again.

•

To revert to normal playback, press the 

 

 button again.

•

To stop the video tape, press 

 

.

•

To eject the tape press 

 

 on the VCR.

 should enhance the picture quality during playback. It is 

normally set to ON. To turn 

on or off press 

 on 

the VCR front panel. 

This VCR has an automatic tracking system which reduces picture disturbance when you start 

to playback a video tape. When auto-tracking is in operation 

 flashes on the on-screen 

display. If the picture still has disturbance you may need to manually track the video tape:

During PLAYBACK of a video tape.

•

Press

 

 or 

 to position picture interference off the TV screen. 

(Manual Tracking)

•

Press  

 

 and 

 buttons together to start Auto Tracking.

Press the

 

 button to start the video tape playing.

To pause the video tape, press 

 

.

•

To minimise jitter whilst in pause mode press 

 or 

.

•

Press the

 

 button to resume playback.

To playback in slow motion (without sound) press the

button on the remote 

control. Slow motion speed can be adjusted using the 

 or 

 buttons next to the slow 

button. Picture disturbance can be improved by using the 

 or 

 

during slow motion playback. 

•

Press the

 

 button to resume playback.

•

When using SLOW MOTION function some mechanical noise may be heard.

•

There will be picture interference and possibly a change to black and white picture 
using Pause and Slow functions.

•

PAUSE mode will disengage after about 5 minutes.

TINS3807 ENGLISH.book  Page 10  Wednesday, May 10, 2000  10:17 AM

11

Press

 

 to stop the video tape.

Press the 

 

/

  

 buttons on the remote control or  on the 

VCR front panel.

To stop fast forward/rewind, press 

 

.

During playback, press the 

 

/

 

 buttons on the remote 

control, or on the VCR front panel.

To decrease the speed, press 

 

/

 

  again.

Press 

              to resume playback.

•

There will be picture interference and possibly a change to black and white picture 
using Visual Fast Forward/Rewind functions.

TINS3807 ENGLISH.book  Page 11  Wednesday, May 10, 2000  10:17 AM

12

Select the channel you wish to record by using the number buttons on the VCR remote 

control, or select the next/previous channel by pressing 

 

 or 

 on the 

remote control or on the VCR front panel.

To change between single digit and 2-digit channel numbers, press 

 

.

For example, for channel 24, press 

 

 then press 

 

.

You can record the channel you are watching or a different channel.

Insert a video tape into your VCR.

Select the channel you wish to record on the VCR as above.

To start recording, press 

 

.

To pause during recording, press 

 

.

To continue recording, press 

 

.

To stop recording, press 

  

once.

Press 

 

.

To specify a stop time, each additional press of 

 

 will delay the stop time by 10 

minutes.

To stop recording at any time, press 

  

once.

•

If the tape ends before the recording is complete the VCR will stop recording, rewind, 
eject the tape and place the VCR into STANDBY mode, or just eject the tape and place 
the VCR in STANDBY timer mode if the VCR is in timer record mode.

•

If the VCR ejects the video tape when you press 

 

 the tape is record protected. 

i.e. record protection tab has been removed. 

TINS3807 ENGLISH.book  Page 12  Wednesday, May 10, 2000  10:17 AM

 

13

 

You can make a maximum of eight delayed recordings up to a year in advance.
The example shown is for 24-hour clock operation. To change to12-hour clock operation refer 
to 

 

section of this manual.

12-hour clock am/pm can be selected using the 

 

 

 button on the remote 

control.

 

•

If 

 appears on the VCR display, press the 

 

 button to remove 

the  

symbol.

•

Check that the VCR clock is displaying the correct time.

 

For example: Recording a programme on channel 3 from 21:05 to 22:30 on July 9th.

 

Press

 

 

 to ensure that the VCR is 

switched on.

 

Press the 

 

 button

 

.

 

Press the [

/

] menu select buttons to 

select 

 

.  Press the 

 

 

 button to 

confirm.

 

Press the 

 

  

button

 

again, the on-screen 

display will now show today’s date. 
If you wish to change the date use the
[

/

] or the 

 

. Enter 

two digits for the day, then two for the month. 
For example for July 9th, press 

 

 (9th), then 

 

 (July).

When the correct date for your recording is 
shown, press the

menu select button to move 

to the next setting. 

 

If you want to make additional recordings at 
the same time each day or week, use 
[

/

] to select D (daily) or W (weekly).

Then press

to move to the next setting.

 

Enter the channel number using the [

/

] 

or the 

 

. For example to 

record a programme on channel 3, press 0 3. 
Then press

to move to the next setting.

  : S E L EC T

 

Module 07A.fm  Page 13  Monday, May 15, 2000  9:45 AM