DOWNLOAD Sharp LC-70LE857E (serv.man4) Service Manual ↓ Size: 8.03 MB | Pages: 94 in PDF or view online for FREE

This function allows you to select the digital audio 
signal type.

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “Digital audio output”.

To stereo audio system

To multi-channel Dolby Digital, DTS 
audio system

When using the PC terminal or HDMI 2 terminal, you 
must select which terminal uses the AUDIO (L/R) 
jack for analogue audio input.

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “Audio select”.

When connecting devices (including a PC) 
with a HDMI cable to the HDMI 2 terminal.

When connecting devices (including a 
PC) with a DVI/HDMI cable to the HDMI 
2 terminal and inputting analogue audio 
signals from the AUDIO (L/R) jack.

When connecting devices with an 
AV cable to the PC terminal, displays 
images without audio.

When connecting a PC to the PC 
terminal, and inputting analogue audio 
signals from the AUDIO (L/R) jack.

This setting allows you to skip the inputs on the 
input source selection operation.

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “Input skip”.

•  When you select “ATV”, “DTV” or “SAT”, the skip 

function works only when using the b button on the 
TV.

•  If you connect external equipment to an HDMI terminal 

which you have set to be skipped, a notification 
message appears on the display when a signal is 
received from the connected external equipment. Press 
“OK” to reset the related skipping setting so that the 
input terminal becomes available.

For setting the signal type of external equipment.

 

Press b to select the input source for setting 
the input signal (“EXT1”) from the “INPUT” 
menu, and then press 

;.

 

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “Input select”.

Y/C, CVBS, RGB

•  If no (colour) image displays, try changing to another 

•  Check the operation manual of the external equipment 

for the signal type.

You can label each input source with a custom 
description.

 

Press b to select the desired input source 
from the “INPUT” menu, and then press 

;.

 

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “Input label”.

 

Select each character of the new name for the 
input source with using the software keyboard 
(Page 14).

•  The label can be six characters or less.
•  This menu can be changed in the case of the following 

input sources:

 

− EXT1–3

 

− HDMI1–4

 

− PC

TV

INPUT

Switchable

CH list

This function allows you to automatically change to 
the appropriate picture size when viewing an HDMI 
signal using the HDMI 1, 2, 3 and 4 terminals.

 

Press b to select the input source (“HDMI 1”, 
“HDMI 2”, “HDMI 3” or “HDMI 4”) connected to 
your HDMI device, and then press 

;.

 

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “HDMI auto view”.

You can select which device is used for outputting 
audio.

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “Headphone/Audio out 
select”.

Output audio through headphones.

Output audio through an A/V receiver 
or surround audio controller.

•  This terminal is also used for headphones. Reduce the 

volume before using headphones. Overwhelming sound 
may damage your hearing.

•  If you select “Audio out” when a cable is inserted in the 

HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are 
muted.

•  When you select “Audio out”, you can adjust the TV 

sound volume with the i+/- buttons.

You can select the headphone/speaker audio output 
when using the headphones.

Go to “TV Menu” > “Setup” > “Option” > 
“Terminal setting” > “Headphone out setting”.

Audio output from headphones only.

Audio output from headphones and 
speakers.

•  This function does not work when “Change audio 

output device” (Page 34) is set to “By AQUOS audio SP” 
or “Headphone/Audio out select” is set to “Audio out”.

•  Regarding the volume adjustment when “Dual” is set:

 

− Adjust the speaker volume with the i+/- buttons 

on the remote control unit.

 

− Adjust the headphone volume with the i+/- 

buttons on the TV.

 

− The headphone volume is not muted even by pressing 

e (Mute) button on the remote control unit.

•  When not using the headphones:

 

− Audio outputs from the speakers regardless of the 

settings.

You can change the colour system to one that is 
compatible with the image on the screen.

Go to “TV Menu” > “Setup” > “Option” > 
“Colour system”.

•  The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel 

is automatically set. If an image does not display clearly, 
select another colour system (e.g., “PAL”, “SECAM”).

This function shows a screen effect when choosing 
or changing channels.

Go to “TV Menu” > “Setup” > “Option” > 
“Screen effect” > “Channel selecting effect”.

This function allows you to display programme 
information such as the title and airtime by tuning a 
channel.

Go to “TV Menu” > “Setup” > “Option” > 
“Screen effect” > “Programme title display”.

•  This function is available only when the DTV/SAT mode 

is selected.

For adjusting a picture’s horizontal and vertical 
position.

Go to “TV Menu” > “Setup” > “Option” > 
“Screen effect” > “Position”.

Centres the image by moving it to the 
left or right.

Centres the image by moving it up or 
down.

•  Adjustments are stored separately for each input 

source.

•  Depending on the input signal type, “Wide mode” 

setting or “Video mode” for the USB media mode, a 
position setting may not be available.

•  This function is not available for DTV broadcasts with 

MHEG signals.

•  This function is not available for DTV broadcasts with 

MHP signals (858 series only).

•  This function is available for 3D images converted from 

2D images or normal 2D images.

This function makes the LED on the front of TV 
illuminated in several ways.

Go to “TV Menu” > “Setup” > “Option” > 
“Illumination”.

The LED is not illuminated.

The LED is illuminated while the TV is 
in standby mode.

The LED is illuminated while you watch 
TV.

The LED is illuminated all the time.

•  The factory default for this item is “Watch”. Set to “Off” 

if you do not want the LED to illuminate.

•  The LED is illuminated in white for 2D mode.
•  The LED is illuminated in blue for 3D mode.

You can reduce the TV’s start-up time after turning 
on the power with the remote control unit.

Go to “TV Menu” > “Setup” > “Option” > “Quick 
start”.

The TV quickly starts up from standby. 
Around 15 W or more of power 
consumption is required during 
standby.

The TV enters wallpaper mode when in 
standby condition.

Power consumption is small during 
standby.

This function is available only when “Quick start” is 
set to “On (Wallpaper)”.
Activating the function will display still images when 
the TV is in standby mode.

For the wallpaper, you can select either the still 
images pre-installed in the TV or your favourite still 
images stored in the USB device.

The images pre-installed in the TV will 
be displayed in a slideshow.

Images stored for the wallpaper will 
appear.
If only a single still image is stored in 
the USB device, that image will be 
displayed as the wallpaper. When there 
are multiple still images in the memory, 
all the images will be displayed in a 
slideshow.

•  Images are displayed as a slideshow in 3-minute 

intervals.

•  As a USB device cannot be detected immediately after 

the TV is turned on from standby mode, the wallpaper 
pre-installed in the TV may be displayed even when 
“Data source” is set to “USB”. To display the USB 
Wallpaper, turn on the power and wait 10 seconds 
before turning off the power.

•  When in the wallpaper function, do not perform any 

OAD operations or EPG searches.

•  A timer set for recording or watching a programme will 

take priority 2 minutes before the programme starts.

E

•  Create a folder named “WP” in the root directory of the 

USB device (the first directory when the USB device is 
opened), and store into the folder the still images you 
want to display for the wallpaper.

•  You must insert the USB device into the USB terminal 

before turning off the TV.

You can set the length of time the TV will remain in 
the Wallpaper mode (3 hours/6 hours/12 hours/24 
hours).

• Setting “Quick start” to “On” consumes more power.
•  No buttons except for a work even while the still 

images are being displayed.

•  If the ready-for-use USB device is not inserted, the still 

images pre-installed in the TV will be displayed in a 
slideshow even when “Data source” is set to “USB”.

•  The still images will be displayed until the set time has 

elapsed.

•  If you do not want to use the wallpaper as described 

above, set “Quick start” to “On” or “Off”.

With this function activated, the SHARP logo will be 
displayed when you turn on the TV.

•  This function is not available when the “Quick Start” is 

set to “On”.

This function allows you to display the elapsed time 
on the screen when “AV mode” is set to “GAME”.

Go to “TV Menu” > “Setup” > “Option” > “Game 
play time”.

Under connecting a game console to 
the TV, the elapsed time is displayed 
in 30-minute increments after you start 
playing a game.

Hides the time.

•  This menu can be selected in the case of the following 

input sources:

 

− EXT1–3

 

− HDMI1–4

 

− PC

This function allows you to lock the buttons on the 
TV or remote control unit in order to prohibit children 
from changing the channel or volume.

Go to “TV Menu” > “Setup” > “Option” > “Key 
lock”.

Unlocks the buttons.

Locks all buttons on the remote 
control unit.

Locks the buttons on the TV except 
the power switch.

•  You cannot set both “RC control lock” and “Button 

control lock” at the same time.

E

Press @ on the TV and set to “Off” to cancel 
the “RC control lock”. Press @ on the remote 
control unit and set to “Off” to cancel the “Button 
control lock”.

•  Refer to page 20 for menu operation using 

@ on the 

TV.