DOWNLOAD Sharp LC-70LE857E (serv.man4) Service Manual ↓ Size: 8.03 MB | Pages: 94 in PDF or view online for FREE

You can reconfigure the analogue TV channels 
settings automatically or manually.

E

Use this menu to add new services automatically 
after “Analogue search” in the “Auto installation” 
menu has been completed.

•  Start searching channels after selecting the colour 

system and sound system.

E

Use this menu to set up analogue TV channels 
manually.

After selecting “Yes” on the screen, press 

a/b/c/d to select the channel you want to 
set and then press 

;.

You can adjust the frequency to the desired position.

•  Adjust while checking the background picture as a 

reference.

•  You can set by directly entering the frequency number 

of the channel with 0_9 numeric buttons.

•  179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
•  49.25 MHz: Press 4 > 9 > 2 > 5 > 

;.

Select the optimum colour system to receive 
(“Auto”, “PAL”, “SECAM”).

Select the optimum sound systems (broadcasting 
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).

When a TV channel sends its network name, the 
“Auto installation” detects the information and 
assigns a name to it. However, you can change 
channel names individually.

Select each character of the new name for the 
channel with using the software keyboard (Page 14).

•  The name can be five characters or less.

Channels with “Skip” set to “On” are passed over 
when using :r/s even if selected while watching 
the image from the TV.

You can block the viewing of any channel.

• See “PIN” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock 

has been activated” displays, and the image and sound 
of the channel are blocked.

• When pressing 6 while “Child lock has been activated” 

displays, the PIN input window will display. Inputting 
the correct PIN unlocks the “PIN” temporarily until the 
power is turned off.

E

Channel positions can be sorted freely.

 

Press 

c/d to select “Yes”, and then press ;.

 

Press 

a/b/c/d to select the channel you 

want to move, and then press 

;.

 

Press 

a/b/c/d to move it to the desired 

position, and then press 

;.

 

Repeat steps 2 and 3 until all desired channels 
are sorted.

E

Channels can be erased individually.

 

Press 

c/d to select “Yes”, and then press ;.

 

Press 

a/b/c/d to select the channel you 

want to erase, and then press 

;.

•  A message window pops up.

 

Press 

c/d to select “Yes”, and then press 

; to erase the selected channel. All the 
subsequent channels move up.

 

Repeat steps 2 and 3 until all desired channels 
are erased.

Allows you to use a PIN to protect certain settings 
from being accidentally changed.

Go to “TV Menu” > “Setup” > “View setting” > 
“Individual setting” > “PIN”.

•  PIN input is required when executing “PIN”. The default 

PIN is “1234”. To reset the PIN setting (PIN input will no 
longer be needed), refer to Reset the PIN (Page 79).

E

Register a four-digit number to use the “PIN” 
function.

 

Press 

c/d to select “Yes”, and then press ;.

 

Enter the four-digit number as a PIN using 0_9 
numeric buttons.

 

Enter the same four-digit number as in step 2 to 
confirm.

•  “The system PIN has been changed successfully” 

displays.

 

Press 

;.

•  As a precautionary measure, make a note of your 

•  “0000” cannot be set as the PIN code.
•  To view a locked channel, you must enter the PIN (see 

pages 42 and 43 for locking channels from viewing in DTV, 
SAT and ATV mode). When you select a locked channel, 
a PIN prompt message pops up. Press 6 to display the 
PIN input window.

This function allows DTV services to be restricted. 
It prevents children from watching violent or sexual 
scenes that may be harmful.

 

Go to “TV Menu” > “Setup” > “View setting” > 
“Individual setting” > “Parental rating”.

 

Repeat steps 1 to 4 in when selecting “Yes” to 
the left.

•  “Universal viewing” and “Parental approval pref.” are 

ratings used exclusively in France.

•  Refer to page 88 for details about ratings.

You can adjust the time manually and change the 
clock display.

Go to “TV Menu” > “Setup” > “View setting” > 
“Individual setting” > “Clock setup”.

This function allows you to set the clock manually.

•  If you select “No”, the TV will try to get the time for the 

broadcast.

This function allows you to display the clock time in 
the lower-right corner of the screen.

Displays the clock time.

Displays the clock time in 
30-minute increments.

Hides the clock time.

You can select the time format (either “24HR” or 
“AM/PM”) for the clock time.

You can select the type of the clock (either “Digital” 
or “Analogue”) displayed in the lower right of the 
screen.

•  This setting does not influence the clock displayed on 

the HOME screen.

Set up to three preferred multi audio languages to 
display if the audio languages are available.

Go to “TV Menu” > “Setup” > “View setting” > 
“Individual setting” > “Digital audio language”.

E

Each time you press 7 on the remote control unit, 
the audio language switches.

Set up to two preferred subtitle languages (including 
subtitles for the hearing impaired) to display if 
subtitles are available.

Go to “TV Menu” > “Setup” > “View setting” > 
“Individual setting” > “Subtitle”.

 

E

 

E

 

E

E

Each time you press [ on the remote control unit, 
the subtitle switches.

E

Subtitles for the hearing impaired have priority over 
each of the subtitle language settings (e.g., “1st 
language”, “2nd language”, etc.).

•  Subtitles will not be displayed when the programme 

does not contain subtitle information.

•  Subtitles for teletext will not be displayed when an MHP 

service is active (858 series only).

•  Subtitles may not be displayed properly in 3D mode.

You can select an OSD language from among 26 
languages. Refer to the OSD language column in 
the specification table for the selectable languages 
(Page 84).

Go to “TV Menu” > “Setup” > “View setting” > 
“Language”.

Go to “TV Menu” > “Setup” > “Option”.

Setup

Option for view

Option

3D setup

CH list

:Back

:Enter

Menu

Terminal setting

Colour system

You can select the picture size. Selectable picture 
size varies with the type of signal received.

 

Go to “TV Menu” > “Setup” > “Option” > 
“Option for view” > “Wide mode”.

•  You can also select an item by pressing f on the 

remote control unit.

•  The menu lists the “Wide mode” options selectable 

for the type of video signal currently received.

 

Press 

a/b to select the desired item.

•  As you toggle the options, each is immediately 

reflected on the screen. There is no need to press 
;.

Keeps the original aspect ratio in a full 
screen display.

For 14:9 letterbox pictures. A thin 
side bar appears on each side, and 
you may also see bars on the top and 
bottom with some programmes.

In this mode, the picture is stretched 
toward each side of the screen. The 
picture may appear similar to “Full” 
depending on broadcast signals.

For 16:9 squeeze pictures.

For 16:9 letterbox pictures. Bars may 
appear on the top and bottom with 
some programmes.

For 14:9 letterbox pictures. Bars may 
appear on the top and bottom with 
some programmes.

Keeps the original resolution, do not 
expand.

*  The items will be diplayed in ATV/DTV/SAT mode.

Displays with an overscan image. 
Crops all sides of screen.

Displays with an underscan image 
only when receiving a 720p signal. 
Displays with the High-Definition image 
adjusted optimally. Noise may appear 
on the edge of the screen with some 
programmes.

Displays an image with the same 
number of pixels on the screen when 
receiving 1080i/1080p signals only.

•  Some items do not appear depending on the type of 

received signal.

•  You may not be able to change the wide mode while in 

3D mode.

•  Refer to page 59 for PC signal inputs.

The “Auto wide” allows the TV to switch 
automatically among the different picture size.

Go to “TV Menu” > “Setup” > “Option” > “Auto 
wide”.

• Use “Wide mode” if an image does not switch to the 

appropriate picture size. When the broadcast signal 
contains no aspect ratio information, the function will 
not work even if enabled.

•  This function is available for 3D images converted from 

2D images or normal 2D images.

The 4:3 mode allows you to select between 
“Normal” and “Full”.

Go to “TV Menu” > “Setup” > “Option” > “4:3 
mode”.

Normal range keeping 4:3 or 16:9 
aspect ratio.

Wide image without side bars.