DOWNLOAD Sharp LC-60UD20KN (serv.man5) Service Manual ↓ Size: 9.11 MB | Pages: 89 in PDF or view online for FREE

o

o

I On-mode (W) (in home-mode)

173 W

184 W

J Energy-Save-Mode (W)

Advanced

125 W

134 W

K Standby-Mode (W)

0.18 W

0.18 W

L Annual Energy Consumption (kWh)

240 kWh

255 kWh

L

Advanced

173 kWh

186 kWh

 

5

B

A

 

I

Measured according to EN 62087:2009

 

J

For further information about the Energy Save function, please see related pages in 
this operation manual

 

K

Measured according to EN 50564:2011
Standby power consumption applies when the TV is set to not receive EPG data

 

L

Annual energy consumption is calculated according to EU Regulation (EU) 
No 1062/2010 based on operating 4 hours per day for 365 days a year

•  The power consumption of on-mode varies depending on the images the TV displays.

•  This TV should be mounted on a wall only with a SHARP wall mount bracket. 

The listed optional accessory is available for this LCD colour TV. Please purchase them at your 

nearest shop.

•  Mounting the LCD colour TV requires special skills and should only be performed 

•  You can ask qualified service personnel about using an optional bracket to mount the 

TV to a wall.

•  When you mount the TV on a wall, you should attach the supporting post.

•  Detach the cable tie on the rear of the TV when using the optional mount bracket.
•  Due to the terminal configuration on this TV, when you wall-mount this model, make 

sure there is enough space between the wall and the TV for the cables.

•  To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4 

locations on the rear of the TV, and then use the screws supplied with the wall mount 
bracket to secure the bracket to the rear of the TV.

E

When you mount the TV on a wall, you can adjust the sound to a more suitable 
one by setting this function to “Yes”.

Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.

1

Wall mount bracket 

AN-52AG4

The mark “c” indicates the location of 
the centre of the TV screen

.

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

✔

—

—

—

—

—

—

—

—

—

—

—

—

—

—

✔

✔

✔

✔

✔

—

—

—

—

—

—

—

—

—

—

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

—

—

—

✔

—

—

✔

✔

—

Audio Return Channel

Analogue TV

Consumer Electronics Control

Digital Video Xtreme®

:

Digital Noise Reduction

Digital TV

Digital Video Broadcasting-Cable

Digital Video Broadcasting-Satellite

Digital Video Broadcasting-Satellite-Second Generation

Digital Video Broadcasting-Terrestrial

Digital Video Broadcasting-Terrestrial Version 2

Digital Visual Interface

Electronic Programme Guide

Hybrit Broadcast Broadband TV

High-bandwidth Digital Content Protection

High-Definition Multimedia Interface

Local Area Network

Multimedia and Hypermedia Expert Group

Mobile High-Definition Link

On Screen Display

Pulse Code Modulation

Satellite

Universal Serial Bus

Wi-Fi® Protected Setup

 

I

Active area

 

J

Thinnest part (except of terminal height)

•  Dimensions do not include protrusions such as screws and some parts.

LC-60UD20E
LC-60UD20EN
LC-60UD20KN

LC-70UD20E
LC-70UD20EN
LC-70UD20KN

On 30 November, 2010 the European Commission adopted the Commission 
Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of 
televisions. 

The Regulation entered into force on 20 December 2010 and applies in all 
Member States. 
Manufacturers and dealers are required to display the label, on their televisions 
from 30 November 2011.

The label provides information to assist consumers in evaluating televisions for 
energy efficiency and energy consumption and to make a purchasing decision 
that contributes to the protection of the environment and to a lower carbon 
society.  

The figure below shows the advanced label design and explains the information 
included. For further information please visit the Sharp internet homepage
(http://www.sharp.eu).

The retailer or online shop where you purchased your television from would have 
displayed the label and its corresponding rating. If in doubt please consult them.  

1

2

3

4

5

6

7

8

9

•  Methods for calculating the Energy Efficiency Index and the annual on-mode energy 

consumption are set out in Annex II of Regulation (EU) No 1062/2010. The determination 
of the on-mode consumption is based on the international standard EN 62087:2012.