Sharp LC-60LE855E (serv.man3) Service Manual ▷ View online
LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K
6 – 11
<During external connection> No picture on the monitor
No picture appears on EXT1 connected monitor during the ATV reception.
Does CVBS signal output from pin [19] of EXT1 (SC505) ?
YES
Check the setting of an external input device that connects with EXT1 .
NO
Does CVBS signal output from pin [5] of IC510 ?
(CAPLESS VIDEO AMP with LPF)
(CAPLESS VIDEO AMP with LPF)
YES
Check the line between SC505 and IC510 .
NO
Does CVBS signal input to pin [3] of IC510 ?
YES
Check the peripheral circuits of IC510 .
NO
Does CVBS signal output from pin [2] of IC507 ?
YES
Check the line between IC507 and IC510 .
NO
Is CVBS_OUT_MUTE [pin (1)] of IC507 at “L” ?
YES
Check the line between IC3301 and IC507 .
Check the peripheral circuits of IC3301 ?
Check the peripheral circuits of IC3301 ?
NO
Does CVBS signal input to pin [6] of IC507 ?
YES
Check the peripheral circuits of IC507 .
NO
In the case of LE855.858 series , refer to (A)
In the case of LE857 series , refer to (B)
In the case of LE857 series , refer to (B)
(A)
(B)
Check the line between IC507 and TUNER(TU1105).
(Q1106 etc)
(Q1106 etc)
Check the line between IC507 and TUNER(TU1101).
(Q1106 etc)
(Q1106 etc)
LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K
6 – 12
<During external connection> No picture on the monitor
No picture appears on EXT1 connected monitor during the DTV reception.
Does CVBS signal output from pin [19] of EXT1 (SC505)?
YES
Check the setting of an external input device that connects with EXT1.
NO
Does CVBS signal output from pin [5] of IC510 ?
(CAPLESS VIDEO AMP with LPF)
(CAPLESS VIDEO AMP with LPF)
YES
Check the line between SC505 and IC510.
NO
Does CVBS signal input to pin [3] of IC510?
YES
Check the peripheral circuits of IC510.
NO
Does CVBS signal output from pin [2] of IC507?
YES
Check the line between IC507 and IC510.
NO
Is CVBS_OUT_MUTE [pin (1)] of IC507 at”H”?
YES
Check the line between IC3301 and IC507.
Check the peripheral circuits of IC3301 ?
Check the peripheral circuits of IC3301 ?
NO
Does CVBS signal input to pin [4] of IC507?
YES
Check the peripheral circuits of IC507.
NO
Does CVBS signal output from pin(AU30/CPU_VDACX_OUT) of
IC3301(Digital AV decode & Main CPU) ?
IC3301(Digital AV decode & Main CPU) ?
YES
Check the line between IC3301 and IC507.
Check the peripheral circuits of IC3301.
Check the peripheral circuits of IC3301.
NO
Refer to “No picture on the display (3)(4)”
[External input Network] No picture on the display
Does not the signal input to Network go out?
Does the signal in/output to pins(1),(2),(3),(6) of LAN-jack
(J9401)?
(J9401)?
NO
Check the interface device and peripheral circuits.
(power-LED of hub, LINK-LED of hub)
(power-LED of hub, LINK-LED of hub)
YES
Do signals in/output to pins of IC3301 (Digital AV decode & Main
CPU)?
Pins [AU18&AT18/CPU_DATMDI_RJ45_TNP, AU17&AT17/
CPU_DATMDI_RJ45_RNP]
CPU)?
Pins [AU18&AT18/CPU_DATMDI_RJ45_TNP, AU17&AT17/
CPU_DATMDI_RJ45_RNP]
NO
Check the line between IC3301 and J9401.
(T9401 etc)
(T9401 etc)
YES
Check IC3301 and its peripheral circuits.
LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K
6 – 13
No power (Central Icon LED failure to light up) or No startup (Central Icon LED is flashing)
Is the AC cord connector tightly connected to the set?
NO
Reconnect the AC cord tightly and turn on the power again.
YES
Are the wire harnesses and other cables properly connected to
the set?
the set?
NO
Reconnect the wire harnesses and other cables properly to the set.
YES
Is power supplied from pins [15/BU+5V] of [PD]P3801 ?
NO
Replace the power unit.
YES
Is there the pins [14/PS_ON] of [PD]P3801 at “H”?
NO
Check the signal line between PS_ON and IC2004(UCOM)/
IC3301(Digital AV decode & Main CPU) .
IC3301(Digital AV decode & Main CPU) .
YES
Is there the pins [13/AC_DET] of [PD]P3801 at "H"?
NO
Check the power unit ,
and the signal line between AC_DET and IC2004/IC3301.
and the signal line between AC_DET and IC2004/IC3301.
YES
Is power supplied from pins [5~8/UR+13V] of [PD]P3801 as
specified?
specified?
NO
Check the line between PS_ON and IC2004/IC3301 .
YES
Are the DC/DC converter outputs and the output voltages along
NO
Check the DC/DC converters and the control lines.
Replace defective parts as required.
Replace defective parts as required.
1) BU3.3V (IC9605 etc.)
2) D5V (IC9607 etc.)
3) U5V (IC9607 etc.)
4) D3.3V (IC9606 etc.)
5) M2.3V (IC9601 etc.)
6) D1.5V (IC9604 etc.)
7) D1.2V (IC9603 etc.)
8) AT5V (IC1104 etc.)
9) TE+1.2V (IC1102 etc.)
10) IF+1.8V (IC1109 etc.)
11) SAT+1.2V (IC1102 etc.)
12) STB+3.3V (Q9602 etc.)
13) AVDD12_HDMISW (IC2602)
14) CPU_ADAC+3.3V (IC3303 etc.)
(IC3302 etc...)
(IC3105 etc...)
(IC1903 etc...)
2) D5V (IC9607 etc.)
3) U5V (IC9607 etc.)
4) D3.3V (IC9606 etc.)
5) M2.3V (IC9601 etc.)
6) D1.5V (IC9604 etc.)
7) D1.2V (IC9603 etc.)
8) AT5V (IC1104 etc.)
9) TE+1.2V (IC1102 etc.)
10) IF+1.8V (IC1109 etc.)
11) SAT+1.2V (IC1102 etc.)
12) STB+3.3V (Q9602 etc.)
13) AVDD12_HDMISW (IC2602)
14) CPU_ADAC+3.3V (IC3303 etc.)
(IC3302 etc...)
(IC3105 etc...)
(IC1903 etc...)
LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K
6 – 14
No light (Back Light doesn't light)
Is the AC cord connector tightly connected to the set?
NO
Reconnect the AC cord tightly and turn on the power again.
YES
Are the wire harnesses and other cables properly connected in
the set?
the set?
NO
Reconnect the wire harnesses and other cables properly in the set.
YES
Does Power starts up (central Icon LED ilights up) ?
NO
Refer to "No power (central Icon LED failure to light up) or no startup
(central Icon LED failure is flashing)"
(central Icon LED failure is flashing)"
YES
Is there the pins [16/PNL_POW] of [PD]P3801 at "H"?
NO
Check the power unit ,
and the signal line between PNL_POW and IC3301
(Digital AV decode & Main CPU) .
and the signal line between PNL_POW and IC3301
(Digital AV decode & Main CPU) .
YES
Is there the pins [24/STB] of [PD]P3801 at "H"?
NO
Check the power unit ,
and the signal line between STB and IC2004(UCOM)/IC3301 .
and the signal line between STB and IC2004(UCOM)/IC3301 .
YES
Replace the power unit.
LCD Panel failure(1)
Does a single or sev-
eral vertical stripes
appear on the LCD
screen?
eral vertical stripes
appear on the LCD
screen?
Does a single or sev-
eral horizontal stripes
appear on the LCD
screen?
eral horizontal stripes
appear on the LCD
screen?
Do luminescent or
black dots appear on
the screen?
black dots appear on
the screen?
Is the on-screen image
rippling or distorted?
rippling or distorted?
Is there any por-
tion which some
screens were
darkish or became
whitish?
tion which some
screens were
darkish or became
whitish?
Does all LED of
one line are not
lighting?
one line are not
lighting?
Replace the LCD panel or the power unit.
LCD Panel failure(2)
The backlight functions.
Does not the image come
out in the LCD screen
(screen black) ?
Does not the image come
out in the LCD screen
(screen black) ?
Does the entire LCD
screen look whitish all
over?
screen look whitish all
over?
Does the QS drive func-
tion?
tion?
Are the data bit drop-out?
(No solution even when
turning on and off the QS
drive)
(No solution even when
turning on and off the QS
drive)
Is the gamma correction as
specified?
specified?
Replace the LCD_CONT_UNIT.
Click on the first or last page to see other LC-60LE855E (serv.man3) service manuals if exist.