DOWNLOAD Sharp LC-60LE855E (serv.man3) Service Manual ↓ Size: 14.91 MB | Pages: 82 in PDF or view online for FREE

LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K

5 – 9

1. Starting the Public Mode

1)  Method of needing password

a) While holding down the  "INPUT"  and   "Volume UP"  keys on the set at once, plug in the AC power cord to turn on the power.

b) Display the Pass Word input screen.

After a while, value of Enter password appears on the screen.

Operation procedure

• The initial input position is the digit at the left end.

• For the numeric keys “0” to “9” of R/C, key input is accepted.

Input of the other keys is prohibited.

• Change “—” to “ ” by inputting the numeric key at the input position, and shift the input position rightward one digit.

• When three digits are completely input, the Pass Word is judged.

c) Check the Pass Word by inputting three digits.

If the Pass Word “0” “2” “7”, it shifts to the PUBLIC Mode setting screen.

In another case, the screen is erased, and it operates in the ordinary mode.

2. Exiting the Public Mode Setting screen

• There are two following ways to exit the Public Mode setting screen.

1) Turn off the power.

2) Select “Execution” in the PUBLIC_Mode to execute it.

Activate the restart under the set content.

Here, the START input SOURCE setting is excluded since this item is referred to only when the power is turned on.

3. Set value of the Public Mode

• When the shipment setting is done, a set each value in Public Mode is initialized.

(PUBLIC MODE in the process mode Setting of a flag is also initialized)

• Separately, the shipment beginnings when all except for each set value in Public Mode is initialized are provided for a process mode.

(INDUSTRY INIT (-Public))

• Only when turning on the PUBLIC MODE item, each setting is effective.

• After it decides it with EXECUTE, it AC OFF/ON it to reflect a set value.

4. Basic operation in the Public Mode

Enter password

Enter password

Enter password

Vol (+/-) or Cursor ( / ) Change or execution of the set value.

Public Mode setting screen.

CH (+/-) or Cursor ( / ) Movement to the selected item.
Decision (ok)

Excution (Used by the items "Execution" and "RESET".)

Public Mode
POWER ON FIXED

SHUT DOWN MODE

MAXIMUM VOLUME

VOLUME FIXED

VOLUME FIXED LEVEL

RC BUTTON

PANEL BUTTON

MENU BUTTON

AV POSITION FIXED

ON SCREEN DISPLAY

INPUT MODE START

INPUT MODE FIXED

LOUD SPEAKER

RC PATH THROUGH

232C POWON

PUBLIC MODE

RESET

EXECUTE

[VARIABLE]

[NORMAL]

[60]

[VARIABLE]

[20]

[RESPOND]

[RESPOND]

[RESPOND]

[VARIABLE]

[YES]

[NORMAL]

[VARIABLE]

[ON]

[OFF]

[DISABLE]

[ON]

LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K

5 – 10

5. Operation after “RESET”

Select “RESET” in the PUBLIC Mode, and it operates as follows when it is executed (refer to the basic operation).

• The set contents in the PUBLIC mode are initialized.

• It does not exit the PUBLIC mode.

• If “EXCUTE” is not executed, the content that does RESET is not reflected.

6. Setting items. (* Item names and selective items are expressed in English.)

1) Power ON fixed [POWER ON FIXED]

If the power button is pressed in the ordinary mode in setting to “FIXED_ALL” and “FIXED_BODYKEY”, the caution is displayed for 5 seconds.

* The OSD display is an example.

If another ODS is previously displayed, the status is reset (MENU or similar).

2) Instantaneous current shutdown setting in turning off the power [SHUT DOWN MODE]

3) Volume maximum level [MAXIMUM VOLUME]

Option

“VARIABLE”, “FIXED_ALL”, “FIXED_BODYKEY” or “RCRESPOND” (loop enabled)

Default “VARIABLE”
Function • VARIABLE

• FIXED_ALL
• FIXED_BODYKEY 
• RC RESPOND 

: “POWER/RECEPTION” key on TV unit or remote control is enabled.
: “POWER/RECEPTION” key on TV unit or remote control is disabled.
: Only the “MAIN POWER” key on TV unit is disabled (The remote control is enabled).
: The main unit’s POWER switch toggles between ON and Standby (the same operation by the 
  remote control).

Key disabled when set 
other than default

• OFF TIMER (SLEEP) (*Only when setting to FIXED_ALL)

Remarks 

• When selecting to “FIXED_ALL”, function related standby factors (see below) doesn’t work. and not selecting.

  OFF TIMER (Sleep)
  No operation OFF
  No signal OFF (including the power management)
* These items does not exist according to the model.

Option

“NORMAL” or “QUICK”

Default NORMAL
Function 

• This function decides whether scanning digital tuner is enabled or disabled when the power is standby.
     NORMAL
     QUICK

: Scanning digital tuner is enabled when the power is standby.
: Scanning digital tuner is disable.
  It is possible to put into the standby state instantaneously due to power off input, when the 
  power is standby.
  Immediately, state is a complete standby.

Remarks 

In selecting “QUICK”, the function does not work for the following items. (selection impossible.)
• ON TIMER, QUICK START, DIGITAL FIXED, etc.

* These items does not exist according to the model.

Option

0~60 (loop disabled)

Default 60
Function

The volume cannot be increased more than the adjusted value (the main unit’s speaker only).

Remarks 

• When setting to 59 or less, only the figure is displayed in the normal mode; the volume bar is not displayed.
• The volume of the headphones is limited.
• The setting is impossible when VOLUME FIXED is set to FIXED.

When power button on the main unit is pressed

When power button on R/C is pressed

No Power off by power button.

No Power off by remote control.

LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K

5 – 11

4) Volume fixed [VOLUME FIXED]

5) Volume fixed level [VOLUME FIXED LEVEL]

6) Remote control operation [RC BUTTON]

7) Main Unit Operation [PANEL BUTTON]

Option

“VARIABLE”, “FIXED”, “ACCTRL” or “AC/RCCTRL” (loop enabled)

Default “VARIABLE”
Function • VARIABLE

• FIXED
• AC CTRL

• AC/RC CTRL 

: The volume is not fixed.
: The volume is fixed to the value adjusted in the volume fixed level.
: The unit starts at the volume specified in the volume fixed level, when power is turned on in the 
  case of the AC-ON only.
: The unit starts at the volume specified in the volume fixed level, when power is turned on in 
  any case.
  (AC

→ON, remote control→ON, main utit's key→ON)

Exception

• In the adjustment process, the volume can be set to any level regardless of this setting.

Disabled key when 
setting to FIXED

• VOLUME UP/DOWN    [both remote control and main unit]
• MUTE 

* Main units's key is enabled for operating menu.

Remarks 

• [MAXIMUM VOLUME] has priority to [VOLUME FIXED]

* When setting to FIXED, Maximum volume is fixed.

• The volume of the headphones is fixed.
• When setting to “FIXED”, the volume is not displayed in operating Disabled key.
• In menu operation, the main unit’s keys (Vol (+/-)) are enabled.
• Volume level graphic be omitted to volume level number.
• In setting to FIXED, ONVOL of On TIMER is not selected (Eliminate Item).
• In setting to AC/RC CTRL, ONVOL of On TIMER i is not selected (Eliminate Item)

Option

0~60 (loop disabled)

Default 20
Function

The volume is fixed to the adjusted value (the main unit’s speaker only).

Exception

• In the adjustment process, the volume can be set to any level regardless of this setting.

Remarks 

• When [VOLUME FIXED] is set to “VARIABLE”, the setting cannot be changed.
• VOLUME can be abbreviated to VOL.

Option

“RESPOND”, “NORESPOND” or “LIMITED” (loop enabled)

Default “RESPOND”
Function 

The operation of the remote control’s keys is set.
     RESPOND
     NO RESPOND

     LIMITED 

: The remote control’s keys in the normal state are enabled.
: The remote control’s keys in the normal state are disabled.
  The POWER key (RECEPTION/STANDBY key) is also disabled.
: Only a part of keys (CHANNEL, etc.) is enabled and other keys are disabled.

Exception

• All the keys are enabled regardless of this setting while entering the adjustment process mode, inspection mode or 

Public Mode setting screen.

Remarks 

The enable keys when setting to “LIMITED” are depended on Model.

Option

“RESPOND” or “NO RESPOND” (loop enabled)

Default “RESPOND”
Function • RESPOND 

• NO RESPOND

: The main unit’s keys are enabled.
: The main unit’s keys are disabled excluding the POWER key (RECEPTION/STANDBY key).

Exception

• The start operation in the adjustment process mode, inspection mode are enabled regardless of this setting.
• All the keys are enabled regardless of this setting while entering the adjustment process mode, inspection mode or 

Public Mode setting screen.

• For the models with the MENU key on the main unit, menu operation is possible regardless of the setting during the 

initial setting when the power is turned on for the first time.

LC-60LE855E/K,60/70LE857E/RU,858E,70LE857K

5 – 12

8) Menu operation [MENU BUTTON]

9) AV position fixed [AV POSITION FIXED]

10)  OSD display [ON SCREEN DISPLAY]

Option

“RESPOND” or “NO RESPOND” (loop enabled)

Default “RESPOND”
Function

The MENU key on the main unit and remote control is decided whether it is enabled or disabled.

Exception

• RESPOND
• NO RESPOND 

: The manu key is enabled.
: The manu key is disabled.
: All the keys are enabled regardless of this setting while entering the process mode, inspection 
  mode or Public Mode setting screen.

Disabled key excluding 
Menu key when setting 
to not default

All the direct transition keys to menu display. (AUTO PRESET, MANUAL MEMORY and others)
* These keys does not exist according to the model.

Remarks 

When setting to “NO RESPOND”
• For the models with the MENU key on the main unit, menu operation is possible regardless of the setting while the 

initial setting when the power is turned on for the first time.

Option

“VARIABLE” or “FIXED” (loop enabled)

Default “VARIABLE”
Function • VARIABLE

• FIXED

: AV position is not fixed.
: AV position is fixed.
: The image/sound adjustment items in the menu are fixed in the selected state.
: When receiving “AV POSITION” of the remote control, only the actual state is displayed, and 
  setting is not changed.

Remarks 

• When receiving the sound select direct keys (AV POSITION key, OPC, DOLBY key, etc.), only the actual state is 

displayed; no setting is changed.
* These keys does not exist according to the model.

• The settings for the Public mode are retained after the personal data is initialized, each item for the AV position and 

image/sound adjustment are not initialized.

Option

“YES”, “NO” or “LIMITED” (loop enabled)
“LIMITED” is looped only in case of need (destination).

Default “YES”
Function • YES

• NO

• LIMITED

: OSD is displayed.
: The following OSD is not displayed.
  Registration, setting, adjustment menu, channel call, volume bar, and input select.
: Only a part of OSD (CH call: “New Information” etc...) is not displayed.

Key which may be 
enabled
(Example of the confus-
ing key)

• It is OK in the case that simple input select occur or the original state returns soon automatically.

Disabled key when 
setting to not default

• When setting to “NO”, the keys which is related to visibility of the screen and sound cannot be used.

STILL IMAGE, SCREEN DISPLAY, OFF TIMER, AV POSITION, BRIGHTNESS SENSOR, SCREEN SIZE SELECT, 
AUTO PRESET, MANUAL MEMORY, IMAGE SELECT, SOUND SELECT, LANGUAGE, Closed caution
* Disabled keys dependeds on the models. 

Remarks 

• When setting to “NO”,

                                     ON TIMER (Watching reservation) is cleared.
                                     OFF TIMER “SLEEP” is cleared.
* These items does not exist according to the model.

• When setting to “NO”,

                                  These Displays (Version-up, Public mode setting screen, Pass Word input screen of Public 
                                  Mode, the adjustment process mode, K mark of inspection mode) are enabled regardless of 
                                  this setting.