Sharp LC-60LE841E (serv.man2) User Manual / Operation Manual ▷ View online
7
TV (front/side view)
a
(Power)
MENU
(Menu)
b
(Input source)
:r/s
(Programme
[Channel])
i+/-
(Volume)
Illumination LED*
1
Remote control sensor (Page 6)
OPC sensor (Page 31)
3D infrared emitter*
2
I
3D mode: Blue illumination
2D mode: White illumination
J
This panel emits infrared signal towards the 3D glasses you wear when viewing 3D
images. Do not place anything between the 3D infrared emitter on the TV and the
infrared receiver on the 3D glasses. Refer to page 63 for details.
TV (rear view)
USB 3 (WIRELESS LAN) port
USB 2 (HDD) port
ETHERNET (10/100) terminal
Satellite antenna terminal
(840 series only)
Antenna terminal
DIGITAL AUDIO OUTPUT
terminal
HDMI 2/PC AUDIO (L/R)
jack*
3
K
The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC
AUDIO (L/R)). However, the proper item must be selected in the “Audio select” menu
(refer to page 41 for details).
TV (rear view) — continued
SD CARD
(VIDEO STORE) slot
RS-232C terminal
PC terminal
EXT 2 (VIDEO/AUDIO
(L/R)) terminal
EXT 1 (RGB) terminal
EXT 3 (Component/
AUDIO (L/R)) terminal
OUTPUT (Headphones/
AUDIO (L/R)) terminal*
5
USB 1 port
HDMI 1 (HDMI/ARC)
terminal
HDMI 3 (HDMI) terminal
HDMI 2 (HDMI) terminal
HDMI 4 (HDMI) terminal
C.I. (COMMON
INTERFACE) slot
MAIN POWER
switch*
4
L
When the MAIN POWER switch is turned off (a), the amount of electric power
consumed will be reduced to 0.01 W or less. However, unlike when unplugging the AC
cord, the power is not completely disconnected.
M
When the headphone is connected to the OUTPUT terminal, the audio can be output
from the speakers (Page 42).
WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended
• Do not set the volume at a high level. Hearing experts advise against extended
listening at high volume levels.
Important information:
Satellite services are only available for the 840 model series.
Part names and functions
8
Remote control unit
4
5
3
6
7
8
8
10
11
12
9
2
1
14
13
15
16
17
18
18
19
20
21
22
1
>a (Standby/On) (Page 18)
2 ATV
Access conventional analogue TV mode.
DTV
DTV
Access digital TV mode.
SAT
SAT
Access satellite mode.
RADIO
RADIO
DTV/SAT: Switch between radio and
data mode.
• When only data broadcasting (no radio
broadcasting) is transmitted by DVB,
the radio broadcasting will be skipped.
3 EXT MEDIA buttons
EXT MEDIA buttons are used for AQUOS
LINK functions and Time shift functions,
etc.
• AQUOS LINK (Pages 27_30):
Interactively operate compatible
system devices using a single remote
control unit.
• Time shift + (Pages 44_47):
Temporarily record a programme you
are watching.
4 Numeric buttons 0_9
Set the channel. Enter desired numbers.
Set the page in teletext mode.
• When the five Nordic countries
(Sweden, Norway, Finland, Denmark
or Iceland) are selected in the country
setting from initial auto installation
(Page 14), DTV services are four digits.
When another country is selected,
DTV services are three digits.
5
A (Flashback)
Return to the previously selected
channel or external input.
6
7 (Sound mode) (Page 19)
Select a sound multiplex mode.
f (Wide mode) (Pages 40, 51 and 52)
f (Wide mode) (Pages 40, 51 and 52)
Select a wide mode.
7
e (Mute)
TV sound on/off.
8
i+/- (Volume)
Increase/decrease TV volume.
9 D (HOME)
Display the “HOME” screen for enjoying
Internet connection and Home network
functions, as well as performing settings
for the TV.
0 3D (Pages 61_66)
Select between 3D and 2D image
viewing.
Q
a/b/c/d (Cursor)
Select a desired item.
;
;
Execute a command.
ATV/DTV/SAT: Display “CH list” when no
other “Menu” screen is running.
W
>
ATV/DTV/SAT: Exit the “Menu” screen.
AQUOS NET+: Return to the start page.
E CONTROL (Pages 45, 47, 50 and 59)
Display a panel to operate some
functions on the screen.
R
p (Display information) (Page 19)
Display the station information (channel
number, signal, etc.) on the screen.
P. INFO
P. INFO
Display programme information
transmitted through digital video
broadcasting (DTV/SAT only).
T
b (INPUT) (Page 18)
Select an input source.
Y
# (Page 31)
Select audio/video settings.
ECO (Standard/Advanced/Off)
(Page 34)
ECO (Standard/Advanced/Off)
(Page 34)
Select “Energy save” setting.
U
m (Teletext) (Page 22)
ATV: Display analogue teletext.
DTV/SAT: Select MHEG-5 or teletext for
DTV/SAT.
I
:r/s
ATV/DTV/SAT: Select the TV channel.
AQUOS NET+: Scrolls pages up/down.
O EPG (Pages 20_22)
DTV/SAT: Display the EPG screen.
P
6 (Return)
ATV/DTV/SAT: Return to the previous
screen.
AQUOS NET+: Return to the previous
page (This may not function for some
services).
A Buttons for useful operations
[ (Subtitle) (Pages 22 and 39)
Switch subtitle languages on/off.
k (Reveal hidden teletext) (Page 22)
1 (Subpage) (Page 22)
3 (Freeze/Hold) (Page 22)
k (Reveal hidden teletext) (Page 22)
1 (Subpage) (Page 22)
3 (Freeze/Hold) (Page 22)
Freeze a moving image on the screen.
Teletext: Stop updating teletext pages
automatically or release the hold mode.
SR/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g., EPG,
MHEG-5, teletext).
Important information:
Satellite services are only available for
the 840 model series.
Part names and functions
9
Operation overview
Follow the steps below one by one when using the TV. Some steps may not be
necessary depending on your TV installation and connection.
1. Preparation — Connecting the TV
p
r
q
o
n
• Place the TV close
to the AC outlet, and
keep the power plug
within reach.
• Product shape varies
in some countries.
Plug the standard DIN45325 plug (IEC 169-2)
75 q coaxial cable.
Connect the satellite antenna cable.
Insert a CA card into the CI slot to watch
scrambled broadcasts (Page 11).
Plug in the AC cord.
Check that the MAIN POWER switch on the rear
of the TV is turned on (;).
*Important information:
Satellite services are only available for the 840 model series.
2. Preparation — Setting the TV
Press a on the TV (Page 18).
Run the initial auto installation (Page 14).
w Language setting
w Home/Store setting
w Country setting
w PIN setting
w Channel search setting
• Digital search
−
Terrestrial
−
Cable
• Analogue search
• Satellite search
Start searching channels
Congratulations!
Now you can watch TV.
• If necessary, adjust the antenna to attain maximum signal reception (Page 17).
Quick guide
10
3. Daily operation
1
Turn on/off the TV
(Page 18)
• You can turn on/off the
power using both the
remote control and the
TV.
2
Switch between digital, satellite and
analogue broadcast
analogue broadcast
(Page 18)
3
Change channels
(Page 18)
• You can also select a
channel from “HOME” >
“CH list”.
4
Select a programme using EPG
(Pages 20_22)
• If the MAIN POWER
switch is switched off,
the EPG data will be
lost.
4. Advanced features
1
Use Time shift + function
(Pages 45_47)
5. Enjoy additional features
1
Connect external devices
Connection overview
(Pages 23_28)
(Pages 23_28)
• Be sure to turn off the TV and
any devices before making any
connections.
Switch input sources
(Page 18)
(Page 18)
2
Enjoy photos, music and video stored
in USB media/Home network
in USB media/Home network
(Pages 48_51)
3
Display a PC image on the TV screen
(Pages 52_56)
4
Enjoy internet service* with the TV
(Pages 12 and 57_60)
* The following service is now
available:
• YouTube™ (Page 12)
• Net TV (Pages 59–60)
5
Watch 3D images
(Pages 61_66)
• Some menu items are greyed
out in 3D mode. This is not a
malfunction.
Quick guide
2
Adjust TV settings and enjoy internet
service
service
(Pages 31_43)
• You can launch Internet
connection and Home
network functions, as
well as perform settings
for the TV from the
“HOME” screen.
Select
Enter
End
USB media
Home network
IP Control
Network setup
Input change
TV Menu
CH list
Click on the first or last page to see other LC-60LE841E (serv.man2) service manuals if exist.