Sharp LC-60LE651K Handy Guide ▷ View online
Issued by:
CE After Sales Service
CE After Sales Service
Block Diagrams
Major IC Information…cont
October 2013
Features.
Input Voltage Range: 2.4V to 5.5V.
Programmable Over-Current Threshold.
Fast Transient Response:
1μs Response to Short Circuit.
10μA Typical while Enabled.
160mΩ Typical RDS(ON).
Only 2.4V Needed for ON/OFF Control.
Under-Voltage Lockout.
Reverse Blocking During Disable.
4ms Fault Blanking.
Fault Flag Open Drain Output.
Active Hi/Lo Enable Options.
Over-Temperature Protection.
Input Voltage Range: 2.4V to 5.5V.
Programmable Over-Current Threshold.
Fast Transient Response:
1μs Response to Short Circuit.
10μA Typical while Enabled.
160mΩ Typical RDS(ON).
Only 2.4V Needed for ON/OFF Control.
Under-Voltage Lockout.
Reverse Blocking During Disable.
4ms Fault Blanking.
Fault Flag Open Drain Output.
Active Hi/Lo Enable Options.
Over-Temperature Protection.
Issued by:
CE After Sales Service
CE After Sales Service
Block Diagrams
Major IC Information…cont
October 2013
IC9553: Low Dropout LDO (USB2)
Part number: S-1170B50UC-OUJTFG (SEIKO)
Sharp code: VHIS170B50U-1Y
Sharp code: VHIS170B50U-1Y
http://datasheet.sii-ic.com/en/voltage_regulator/S1170_E.pdf
The S-1170 Series is a positive voltage regulator with a low dropout voltage (LDO), high output voltage
accuracy, and low current consumption developed based on CMOS technology.
A built-in low on-resistance transistor provides a low dropout voltage and large output current, a built-in
overcurrent protector prevents the load current from exceeding the current capacitance of the output
transistor, and a built-in thermal shutdown circuit prevents damage caused by the heat. An ON/OFF circuit
ensures a long battery life. Compared with the voltage regulators using the conventional CMOS process, a
larger variety of capacitors are available, including small ceramic capacitors. Small SOT-89-5 and 6-Pin HSON(A)
packages realize high-density mounting.
accuracy, and low current consumption developed based on CMOS technology.
A built-in low on-resistance transistor provides a low dropout voltage and large output current, a built-in
overcurrent protector prevents the load current from exceeding the current capacitance of the output
transistor, and a built-in thermal shutdown circuit prevents damage caused by the heat. An ON/OFF circuit
ensures a long battery life. Compared with the voltage regulators using the conventional CMOS process, a
larger variety of capacitors are available, including small ceramic capacitors. Small SOT-89-5 and 6-Pin HSON(A)
packages realize high-density mounting.
Issued by:
CE After Sales Service
CE After Sales Service
Block Diagrams
Major IC Information…cont
October 2013
Features:
Output voltage: 1.5 V to 5.5 V, selectable in 0.1 V steps.
High-accuracy output voltage: ±1.0%.
Low dropout voltage (LDO): 120 mV typ. (3.0 V output product, Iout =300 mA).
Low current consumption: During operation 80 μA typ. 160 μA max.,
During shutdown 0.1 μA typ. 1.0 μA max.
High peak current capability: 800 mA output is possible (@ Vin >Vout(S) +1.0 V) *1
Built-in ON/OFF circuit.
High ripple rejection: 70 dB typ. (@ 1.0 kHz)
Built-in overcurrent protector: Overcurrent of output transistor can be restricted.
Built-in thermal shutdown circuit.
Output voltage: 1.5 V to 5.5 V, selectable in 0.1 V steps.
High-accuracy output voltage: ±1.0%.
Low dropout voltage (LDO): 120 mV typ. (3.0 V output product, Iout =300 mA).
Low current consumption: During operation 80 μA typ. 160 μA max.,
During shutdown 0.1 μA typ. 1.0 μA max.
High peak current capability: 800 mA output is possible (@ Vin >Vout(S) +1.0 V) *1
Built-in ON/OFF circuit.
High ripple rejection: 70 dB typ. (@ 1.0 kHz)
Built-in overcurrent protector: Overcurrent of output transistor can be restricted.
Built-in thermal shutdown circuit.
Issued by:
CE After Sales Service
CE After Sales Service
Block Diagrams
Major IC Information…cont
October 2013
IC 3301: SOC Freeman Premier 2
Part number: FLI7560-AAB (ST MICRO)
Sharp code: RH-IXD514WJZZQ
Sharp code: RH-IXD514WJZZQ
http://www.st.com/st-web-ui/static/active/en/resource/technical/document/data_brief/DM00063486.pdf
The FLI7560 is a revolutionary new iDTV SoC that integrates two highly successful, market proven subsystems: STi710x
digital/front-end processing and multi-format audio/video decoding from the STB market, and Faroudja video/back-
end processing from the TV market. The FLI7560 is a high-performance, state-of-the-art SoC that can power
DTT/cable/satellite/IPTV iDTV designs for worldwide deployment. From the software compatibility extending from the
mature STi710x STAPI layer to the extensive video processing, tuning, and tools from Faroudja Labs, FLI7560 is an ideal
solution for addressing the next generation of iDTV design requirements.
The FLI7560 is the latest in a family of scalable performance and software-compatible H.264 SoCs that address
mainstream and performance segments of the iDTV market.
Notably, it is a single-chip, 120 Hz TV solution incorporating Motion-Corrected Temporal Interpolation (MCTi) Faroudja
technology. It utilizes industry-leading vector estimation to interpolate in between frames to correct film motion
judder and panel motion blurring. Combining the artistic elements of film with the linear motion of video, FLI7560
provides audiences with a uniquely enjoyable viewing experience.
FLI7560 implements the latest generation of Faroudja Video Optimized technologies, which allow a high degree of
customization for TV OEMs. Key technology improvements in this area include 14-bit color and contrast processing,
upgraded sharpness, upgraded temporal noise reduction, and new MPEG noise reduction.
digital/front-end processing and multi-format audio/video decoding from the STB market, and Faroudja video/back-
end processing from the TV market. The FLI7560 is a high-performance, state-of-the-art SoC that can power
DTT/cable/satellite/IPTV iDTV designs for worldwide deployment. From the software compatibility extending from the
mature STi710x STAPI layer to the extensive video processing, tuning, and tools from Faroudja Labs, FLI7560 is an ideal
solution for addressing the next generation of iDTV design requirements.
The FLI7560 is the latest in a family of scalable performance and software-compatible H.264 SoCs that address
mainstream and performance segments of the iDTV market.
Notably, it is a single-chip, 120 Hz TV solution incorporating Motion-Corrected Temporal Interpolation (MCTi) Faroudja
technology. It utilizes industry-leading vector estimation to interpolate in between frames to correct film motion
judder and panel motion blurring. Combining the artistic elements of film with the linear motion of video, FLI7560
provides audiences with a uniquely enjoyable viewing experience.
FLI7560 implements the latest generation of Faroudja Video Optimized technologies, which allow a high degree of
customization for TV OEMs. Key technology improvements in this area include 14-bit color and contrast processing,
upgraded sharpness, upgraded temporal noise reduction, and new MPEG noise reduction.
Click on the first or last page to see other LC-60LE651K service manuals if exist.